PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Quantitative Description of the Spinel Phase (NiAl2O4) Located into Al2O3 Matrix

Treść / Zawartość
Identyfikatory
Warianty tytułu
Języki publikacji
EN
Abstrakty
EN
The presented work focuses on the quantitative description of the spinel phase (NiAl2O4) located into Al2O3 matrix. Three series of samples were prepared. Series I, II and III containing following amount of nickel powder: 0.21% vol, 0.43% vol and 1.3% vol respectively. In order to obtain nickel aluminate spinel sintering was carried out in an oxidizing atmosphere (air). Based on the SEM observation and XRD analysis the presence of spinel phase was confirmed in all samples. Difference in volume fraction of the Ni in the compacts before sintering, resulted in the different content of the spinel phase in the final material. All tested composites were characterized by homogeneous distribution of NiAl2O4 in the whole volume of the material. The purpose of the study was also the use the stereological analysis to determine the shape parameters of new phase.
Twórcy
  • Faculty of Materials Science and Engineering, Warsaw University of Technology, Warsaw, Poland
autor
  • Faculty of Materials Science and Engineering, Warsaw University of Technology, Warsaw, Poland
autor
  • Faculty of Materials Science and Engineering, Warsaw University of Technology, Warsaw, Poland
Bibliografia
  • [1] K. Konopka, M. Maj, K. J. Kurzydłowski, Materials Characterization 51, 335-340 (2003).
  • [2] Y. Zengbin, H. Chuanzhen, Z. Bin, L. Hanlian, Z. Hongtao, W. Jun, Ceramics International 40, 2809-2817 (2013).
  • [3] J. B. Wachtman, Mechanical properties of ceramics, Wiley, New York (1996).
  • [4] R. Pampuch, Wydawnictwo AGH, Budowa i właściwości materiałów ceramicznych, Kraków (1995).
  • [5] J. F. Shackelford, Introduction to Materials Science for Engineers, Prentice-Hall Inc., 4th ed. (1996).
  • [6] A. Boczkowska, J. Kapuściński, K. Puciłowski, S. Wojciechowski, Kompozyty, Oficyna Wydawnicza Politechniki Warszawskiej, Warszawa (2000).
  • [7] K. Konopka, A. Miazga, J. Właszczuk, Composites Theory and Practice, 11, 197-201 (2011).
  • [8] J. Zygmuntowicz, A. Miazga, K. Konopka, Composites Theory and Practice 14, 106-110 (2014).
  • [9] K. J. Kurzydłowski, B. Ralph, CRC Press, in: Quantitive description of micro-structure of materials, Baton Rogue, USA (1995).
  • [10] J. Michalski, T. Wejrzanowski, R. Pielaszek, K. Konopka, W. Łojkowski, K. J. Kurzydłowski, Materials Science Poland, 23, 79-86 (2005).
  • [11] K. Konopka, L. Lityńska-Dobrzyńska, J. Dutkiewicz, Arch. Metall. Maters. 58, 501-504 (2013).
  • [12] M. Lieberthal, W. D. Kaplan, Materials Science and Engineering 302, 83-91 (2001).
  • [13] W. H. Tuan, M. C. Lin, W. H. Tzing, Materials Chemistry and Physics 48, 156-159 (1997).
Uwagi
EN
The research has been financially supported by the Faculty of Materials Science and Engineering Warsaw University of Technology. The authors would like to thank Professor Mikolaj Szafran and his team for their help in sintering the samples.
PL
Opracowanie ze środków MNiSW w ramach umowy 812/P-DUN/2016 na działalność upowszechniającą naukę
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-80063a75-b68b-41db-b173-2fa6a416d3f2
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.