Analysis and perspectives on multivariate statistical process control charts used in the industrial sector: a systematic literature review

• Autorzy: Ueda Renan M. , Agostino Ìcaro R. S. , Souza Adriano M.

Identyfikatory

DOI

10.24425/mper.2022.142054

• Języki publikacji: EN

Abstrakty

EN

The objective of this article is to carry out a systematic review of the literature on multivariate statistical process control (MSPC) charts used in industrial processes. The systematic review was based on articles published via Web of Science and Scopus in the last 10 years, from 2010 to 2020, with 51 articles on the theme identified. This article sought to identify in which industry the MSPC charts are most applied, the types of multivariate control charts used and probability distributions adopted, as well as pointing out the gaps and future directions of research. The most commonly represented industry was electronics, featuring in approximately 25% of the articles. The MSPC chart most frequently applied in the industrial sector was the traditional T2 of Harold Hotelling (Hotelling, 1947), found in 26.56% of the articles. Almost half of the combinations between the probabilistic distribution and the multivariate control graphs, i.e., 49.4%, considered that the data followed a normal distribution. Gaps and future directions for research on the topic are presented at the end.

Słowa kluczowe

EN

multivariate statistical process control; systematic review; control chart; manufacturing; industrial

• Wydawca: Production Engineering Committee of the Polish Academy of Sciences ; Polish Association for Production Management
• Czasopismo: Management and Production Engineering Review
• Rocznik: 2022
• Tom: Vol. 13, No. 2
• Strony: 48--60
• Opis fizyczny: Bibliogr. 78 poz., rys., tab.

Twórcy

autor

Ueda Renan M.

• Laboratory of Statistical Analysis and Modeling, Federal University of Santa Maria, Department of Statistics, University Campus, Santa Maria, Rio Grande do Sul, Brazil

autor

Agostino Ìcaro R. S.

• Federal University of Santa Catarina, Brazil

autor

Souza Adriano M.

• Federal University of Santa Maria, Brazil

Bibliografia

• Abreu R.P. and Schaffer J.R. (2017), A double EWMA control chart for the individuals based on a linear prediction, Journal of Modern Applied Statistical Methods, Vol. 16, No. 2, p. 24.
• Aslam M. et al. (2017), A control chart for multivariate Poisson distribution using repetitive sampling, Journal of Applied Statistics, Vol. 44, No. 1, pp. 123–136.
• Ávila T.C. et al. (2012), Raman spectroscopy and chemometrics for on-line control of glucose fermentation by Saccharomyces cerevisiae, Biotechnology Progress, Vol. 28, No. 6, pp. 1598–1604.
• Babamoradi H., Berg F.V.D., and Rinnan A. (2013), Comparison of bootstrap and asymptotic confidence limits for control charts in batch MSPC strategies, Chemometrics and Intelligent Laboratory Systems, Vol. 127, pp. 102–111.
• Bersimis S., Psarakis S., and Panaretos J. (2007), Multivariate statistical process control charts: an overview, Quality and Reliability Engineering International, Vol. 23, No. 5, pp. 517–543.
• Biolchini J.C.A. et al. (2007), Scientific research ontology to support systematic review in software engineering, Advanced Engineering Informatics, Vol. 21, No. 2, pp. 133–151.
• Capizzi G. and Masarotto G. (2011), A least angle regression control chart for multidimensional data, Technometrics, Vol. 53, No. 3, pp. 285–296.
• Chang S.I. et al. (2012), Statistical process control for monitoring nonlinear profiles: A six sigma project on curing process, Quality Engineering, Vol. 24, No. 2, pp. 251–263.
• Chen J. and Liang Y. (2016), Development of fuzzy logic-based statistical process control chart pattern recognition system, The International Journal of Advanced Manufacturing Technology, Vol. 86, No. 1-4, pp. 1011–1026.
• Cheng C.S. and Cheng H.P. (2011), Using neural networks to detect the bivariate process variance shifts pattern, Computers & Industrial Engineering, Vol. 60, No. 2, pp. 269–278.
• Cheng C.S. and Lee H.T. (2016), Diagnosing the variance shifts signal in multivariate process control using ensemble classifiers, Journal of the Chinese Institute of Engineers, Vol. 39, No. 1, pp. 64–73.
• Cheng Z.Q., Ma Y.Z., and Bu J. (2011), Variance shifts identification model of bivariate process based on LSSVM pattern recognizer, Communications in Statistics – Simulation and Computation®, Vol. 40, No. 2, pp. 274–284.
• Chong N.L. et al. (2019), Hotelling’s T2 control charts with fixed and variable sample sizes for monitoring short production runs, Quality and Reliability Engineering International, Vol. 35, no.1, pp. 14–29.
• Choung Y.J., Kang J., and Kim S.B. (2017), Process control of time-varying systems using parameter-less selforganizing maps, Journal of Process Control, Vol. 52, pp. 45–56.
• Corain L. and Salmaso L. (2013), Nonparametric permutation and combination-based multivariate control charts with applications in microelectronics, Applied Stochastic Models in Business and Industry, Vol. 29, No. 4, pp. 334–349.
• Darmanto S. and Astutik S. (2017), The effectiveness of robust RMCD control chart as outliers detector, Journal of Physics, Vol. 943, No. 1.
• Del Val A.G. et al. (2013), Monitoring of thread quality when tapping nodular cast iron with TiN-coated HSS cutting taps, The International Journal of Advanced Manufacturing Technology, Vol. 69, No. 5-8, pp. 1273–1282.
• Franceschini F., Galetto M., and Genta G. (2015), Multivariate control charts for monitoring internal camera parameters in digital photogrammetry for LSDM (Large-Scale Dimensional Metrology) applications, Precision Engineering, Vol. 42, pp. 133–142.
• Galaverna R. et al. (2018), Coupling Continuous Flow Microreactors to MicroNIR Spectroscopy: Ultracompact Device for Facile In-Line Reaction Monitoring, Organic Process Research & Development, Vol. 22, No. 7, pp. 780–788.
• Gladysz B. and Buczacki A. (2018), Wireless technologies for lean manufacturing – A literature review, Management and Production Engineering Review, Vol. 9, No. 4, pp. 20–34.
• Grassi S. et al. (2019), Control and Monitoring of Milk Renneting Using FT-NIR Spectroscopy as a Process Analytical Technology Tool, Foods, Vol. 8, No. 9, pp. 405.
• Grasso M. and Colosimo B.M. (2019), A statistical learning method for image-based monitoring of the plume signature in laser powder bed fusion, Robotics and Computer-Integrated Manufacturing, Vol. 57, pp. 103–115.
• Guerrero A.P.A., Pombo R.B., and Acosta R.J.K. (2019), Application of robust multivariate control chart with Winsorized Mean: a case study, Journal of Industrial Engineering International, Vol. 15, No. 1, pp. 309–318.
• Haanchumpol T., Sudasna-na-Ayudthya P., and Singhtaun C. (2019), Modern multivariate control chart using spatial signed rank for non-normal process, Engineering Science and Technology, an International Journal.
• Haddad F. and Alsmadi M.K. (2018), Improvement of The Hotelling’s T2 Charts Using Robust Location Winsorized One Step M-Estimator (WMOM), Journal of Mathematics, Vol. 50, No. 1, pp. 97–112.
• Haq A., Gulzar R., and Khoo M.B. (2018), An efficient adaptive EWMA control chart for monitoring the process mean, Quality and Reliability Engineering International, Vol. 34, No. 4, pp. 563–571.
• Harris K. et al. (2016), A multivariate control chart for autocorrelated tool wear processes, Quality and Reliability Engineering International, Vol. 32, No. 6, pp. 2093–2106.
• He Q. and Zhou S. (2014), Discriminant locality preserving projection chart for statistical monitoring of manufacturing processes, International Journal of Production Research, Vol. 52, No. 18, pp. 5286–5300.
• Hotelling H. (1947), Multivariate quality control, illustrated by air testing of sample bombsights, in: Techniques of Statistical Analysis, Eisenhart C., Hastay M.W., Wallis W.A. (Eds.), pp. 111–184,
• McGraw Hill, New York. Kaewsuwan P. et al. (2016), Image Analysis and High Dimensional Control Chart for Inspection of Sausage Color Homogeneity and Uniformity, International Journal of Food Engineering, Vol. 12, No. 7, pp. 625– 635.
• Kan C., Cheng C., and Yang H. (2016), Heterogeneous recurrence monitoring of dynamic transients in ultraprecision machining processes, Journal of Manufacturing Systems, Vol. 41, pp. 178–187.
• Kang J.H. and Kim S.B. (2013), A clustering algorithmbased control chart for inhomogeneously distributed TFT-LCD processes, International Journal of Production Research, Vol. 51, No. 18, pp. 5644–5657.
• Kang J.H. and Kim S.B. (2015), False alarm classification for multivariate manufacturing processes of thin film transistor–liquid crystal displays, Journal of Process Control, Vol. 35, pp. 21–29.
• Kang J.H., Yu J., and Kim S.B. (2016), Adaptive nonparametric control chart for time-varying and multimodal processes, Journal of Process Control, Vol. 37, pp. 34–45.
• Kitchenham B. (2004), Procedures for performing systematic reviews, Keele, UK, Keele University, Vol. 33, pp. 1–26.
• Kurnia H. and Hamsal M. (2021), Implementation of statistical process control for quality control cycle in the various industry in Indonesia: Literature review, Oper. Excell. J. Appl. Ind. Eng., Vol. 13, No. 2, 194– 206.
• Lee K.J. et al. (2015), Interpretations of fault identification in multivariate manufacturing processes, European Journal of Industrial Engineering, Vol. 9, No. 3, pp. 395–408.
• Lee S. and Kim S.B. (2018), Time-adaptive support vector data description for nonstationary process monitoring, Engineering Applications of Artificial Intelligence, Vol. 68, pp. 18–31.
• Li J., Zhang X., and Jeske D.R. (2013), Nonparametric multivariate CUSUM control charts for location and scale changes, Journal of Nonparametric Statistics, Vol. 25, No. 1, pp. 1–20.
• Li T.F. et al. (2013), A framework for diagnosing the outof-control signals in multivariate process using optimized support vector machines, Mathematical Problems in Engineering.
• Li W. et al. (2016), A feasibility research on the monitoring of traditional Chinese medicine production process using NIR-based multivariate process trajectories, Sensors and Actuators B: Chemical, Vol. 231, pp. 313–323.
• Lim S.A.H. and Antony, J. (2014), The implementation of statistical process control in the food industry: a systematic review, In: Proceedings of the 2014 International Conference on Industrial Engineering and Operations Management, pp. 1682–1691.
• Liu Y., Liu Y. and Jung U. (2020), Nonparametric multivariate control chart based on density-sensitive novelty weight for non-normal processes, Quality Technology & Quantitative Management, Vol. 17, No. 2, pp. 203–215.
• Lowry C.A. and Montgomery D.C. (1995), A review of multivariate control charts, IIE Transactions, Vol. 27, No. 6, pp. 800–810.
• Maboudou-Tchao E.M., Silva I.R., and Diawara N. (2018), Monitoring the mean vector with Mahalanobis kernels, Quality Technology & Quantitative Management, Vol. 15, No. 4, pp. 459–474.
• Marcondes Filho D. and Oliveira L.P.L. (2016), Multivariate quality control of batch processes using STATIS, The International Journal of Advanced Manufacturing Technology, Vol. 82, No. 5-8, pp. 867–875.
• Moher D. et al. (2009), Preferred reporting items for systematic reviews and meta-analyses: the PRISMA statement, PLoS med, Vol. 6, No. 7, pp. e1000097.
• Mostajeran A., Iranpanah N., and Noorossana R. (2018), An explanatory study on the non-parametric multivariate T2 control chart, Journal of Modern Applied Statistical Methods, Vol. 17, No. 1, pp. 12.
• Nidsunkid S., Borkowski J.J., and Budsaba K. (2018), The performance of MCUSUM control charts when the multivariate normality assumption is violated, Thailand Statistician, Vol. 16, No. 2, pp. 140–155.
• Ou Y., Chen N., and Khoo M.B. (2015), An efficient multivariate control charting mechanism based on SPRT, International Journal of Production Research, Vol. 53, No. 7, pp. 1937–1949.
• Pan J.N. and Lee C.Y. (2010), New capability indices for evaluating the performance of multivariate manufacturing processes, Quality and Reliability Engineering International, Vol. 26, No. 1, pp. 3–15.
• Peres F.A.P. and Fogliatto F.S. (2018), Variable selection methods in multivariate statistical process control: A systematic literature review, Computers & Industrial Engineering, Vol. 115, 603-619.
• Prajapati D.R. and Mahapatra P.B. (2009), Control charts for variables to monitor the process mean and dispersion: a literature review, International Journal of Productivity and Quality Management, Vol. 4, No. 4, pp. 476–520.
• Rodrigues D.C. et al. (2021), Multivariate control chart with variable dimensions for flexible production environments, International Journal for Quality Research, Vol. 15, No. 3, 701.
• Sales R.F. et al. (2016), Multivariate statistical process control charts for batch monitoring of transesterification reactions for biodiesel production based on nearinfrared spectroscopy, Computers & Chemical Engineering, Vol. 94, pp. 343–353.
• Sangahn K. (2019), Variable selection-based SPC procedures for high-dimensional multistage processes, Journal of Systems Engineering and Electronics, Vol. 30, No. 1, pp. 144–153.
• Snoussi A. (2011), SPC for short-run multivariate autocorrelated processes, Journal of Applied Statistics, Vol. 38, No. 10, pp. 2303–2312.
• Sohaimi M.N.A. et al. (2017), Design methodology of modular-ANN pattern recognizer for bivariate quality control. Journal of Telecommunication, Electronic and Computer Engineering, Vol. 9, No. 3-2, pp. 31–34.
• Subbulakshmi S. et al. (2017), An essential role of statistical process control in industries, International Journal of Statistics and Systems, Vol. 12, No. 2, pp. 355–362.
• Sukparungsee S. et al. (2017), Multivariate copulas on the MCUSUM control chart, Cogent Mathematics & Statistics, Vol. 4, No. 1, p. 1342318.
• Topalidou E. and Psarakis S. (2019), Review of multinomial and multiattribute quality control charts, Quality and Reliability Engineering International, Vol. 25, No. 7, pp. 773–804.
• Tranfield D., Denyer D., and Smart P. (2003), Towards a Methodology for Developing Evidence-Informed Management Knowledge by Means of Systematic Review, British Journal of Management, Vol. 14, No. 3, pp. 207–222.
• Triantafyllopoulos K. (2011), Real-time covariance estimation for the local level model, Journal of Time Series Analysis, Vol. 32, No. 2, pp. 93–107.
• Ueda R.M. et al. (2021), Systematic literature review of Brazilian research on multivariate control charts, Revista Gestão da Produção Operações e Sistemas, Vol. 16, No. 1.
• Varela M.L. et al. (2018), Collaborative manufacturing based on cloud, and on other I4.0 oriented principles and technologies: a systematic literature review and reflections, Management and Production Engineering Review, Vol. 9, No. 3, pp. 90–99.
• Verdier G., and Ferreira A. (2011), Adaptive Mahalanobis distance and knearest neighbor rule for fault detection in semiconductor manufacturing, IEEE Transactions on Semiconductor Manufacturing, Vol. 24, No. 1, pp. 59–68.
• Wade M.R. and Woodall W.H. (1993), A review and analysis of cause-selecting control charts, Journal of Quality Technology, Vol. 25, No. 3, pp. 161–169.
• Xia B. et al. (2018), An effective multivariate control chart for detecting small mean shifts using support vector data description, Advances in Mechanical Engineering, Vol. 10, No. 11, p. 1687814018810625.
• Xia B., Jian Z., and Tao N. (2019), An effective combined multivariate control chart based on support vector data description, Journal of Ambient Intelligence and Humanized Computing, Vol. 10, No. 12, pp. 4819–4835.
• Xiang D., Tsung F., and Pu X. (2017), Statistical process control for latent quality characteristics using the up-and-down test, Technometrics, Vol. 59, No. 4, pp. 496–507.
• Xiong H., Gong X., and Qu H. (2012), Monitoring batchto-batch reproducibility of liquid–liquid extraction process using in-line near-infrared spectroscopy combined with multivariate analysis, Journal of Pharmaceutical and Biomedical Analysis, Vol. 70, pp. 178–187.
• Yan H., Paynabar K., and Shi J. (2015), Image-based process monitoring using low-rank tensor decomposition, IEEE Transactions on Automation Science and Engineering, Vol. 12, no.1, pp. 216–227.
• Yang W.A. and Zhou W. (2015), Autoregressive coefficient-invariant control chart pattern recognition in autocorrelated manufacturing processes using neural network ensemble, Journal of Intelligent Manufacturing, Vol. 26, No. 6, pp. 1161–1180.
• Yang W.A. (2015), Monitoring and diagnosing of mean shifts in multivariate manufacturing processes using two-level selective ensemble of learning vector quantization neural networks, Journal of Intelligent Manufacturing, Vol. 26, No. 4, pp. 769–783.
• You-Jin P., Fan S.K.S., and Chia-Yu H. (2020), A Review on Fault Detection and Process Diagnostics in Industrial Processes, Processes, Vol. 8, No. 9, 1123.
• Zhang C., Chen N., and Zou C. (2016), Robust multivariate control chart based on goodness-of-fit test, Journal of Quality Technology, Vol. 48, No. 2, pp. 139–161.
• Zhang S., Liu Y., and Jung U. (2019), Sparse abnormality detection based on variable selection for spatially correlated multivariate process, Journal of the Operational Research Society, Vol. 70, No. 8, pp. 1321–1331.
• Zeng S. et al. (2013), Monitoring batch-to-batch reproducibility using direct analysis in real time mass spectrometry and multivariate analysis: A case study on precipitation, Journal of Pharmaceutical and Biomedical Analysis, Vol. 76, pp. 87–95.

Uwagi

Opracowanie rekordu ze środków MEiN, umowa nr SONP/SP/546092/2022 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2022-2023)