Options for solutions of the inlet system into the mold

• Autorzy: Ružbarský Juraj , Krenický Tibor , Maščeník Jozef , Coranič Tomáš
• Języki publikacji: EN

Abstrakty

EN

The presented contribution points out the possibilities of solving the inlet system, as one of the important factors influencing the final quality of the castings. Due to its design and function, the sprue system influences the process of filling the mold cavity. With the correct design of the sprue system, we achieve the continuity of filling the mold cavity and the elimination of qualitative and quantitative errors caused by non-observance of basic principles in the design of sprue systems. When conducting the experiments, we monitored the mold inlet system, modeling the process of filling the mold cavity and the speed of the liquid metal in the notch and the mold cavity. The results of the experiments show that the speed of the liquid metal when filling the mold is approximately half of the calculated theoretical value.

Słowa kluczowe

EN

pressure casting; mold construction; inlet system; pressure

PL

odlewanie ciśnieniowe; konstrukcja formy; układ wlotowy; ciśnienie

• Wydawca: STE GROUP
• Czasopismo: Systemy Wspomagania w Inżynierii Produkcji
• Rocznik: 2023
• Tom: Vol. 12, iss. 2
• Strony: 57--70
• Opis fizyczny: Bibliogr. 29 poz.

Twórcy

autor

Ružbarský Juraj

• Technical University of Kosice Faculty of Manufacturing Technologies Sturova 31, 08001 Presov, Slovakia

• https://orcid.org/0000-0002-7021-5061

autor

Krenický Tibor

• Technical University of Kosice Faculty of Manufacturing Technologies Sturova 31, 08001 Presov, Slovakia

• https://orcid.org/0000-0002-0242-2704

autor

Maščeník Jozef

• Technical University of Kosice Faculty of Manufacturing Technologies Sturova 31, 08001 Presov, Slovakia

• https://orcid.org/0000-0002-9632-1129

autor

Coranič Tomáš

• Technical University of Kosice Faculty of Manufacturing Technologies Sturova 31, 08001 Presov, Slovakia

• https://orcid.org/0000-0002-3403-8141

Bibliografia

• [1] Hopmann, C. - Schneppe, T. - Theunissen, M. Et Al.: Investigation on the Transferability of Algorithms for the Numerical Optimization of Cooling Channel Design in Injection Molding on Metal Gravity Die-Casting - 2017. In: Materialwissenschaft Und Werkstofftechnik, Volume: 48, Issue: 12, Pages: 1220- 1225, ISSN: 0933-5137
• [2] Gaspar, S. - Coranic, T. - Majernik, J. - Husar, J. - Knapcikova, L. - Gojdan, D. - Pasko, J.: Influence of Gating System Parameters of Die-Cast Molds on Properties of Al-Si Castings - 2021. In: Materials, Volume 14, Issue 13, eISSN1996-1944
• [3] Silmbroth, M. - Bozorgi, S. - Bozorgi, S.: Analysis of the Mechanical Properties of Secondary Alznmg(Cu) Die-Cast Alloys - 2020. In: International Journal of Metalcasting, ISSN: 1939-5981
• [4] Kang, Hj. - Yoon, Ph. - Lee, Gh. Et Al.: Evaluation of the Gas Porosity and Mechanical Properties of Vacuum Assisted Pore-Free Die-Cast Al-Si-Cu Alloy - 2021. In: Vacuum - 2021. Volume: 184. ISSN: 0042-207x
• [5] Cai, Q. - Mendis, Cl. - Chang, It.H. Et Al.: Microstructure and Mechanical Properties of New Die-Cast Quaternary Al-Cu-Si-Mg Alloys - 2021. In: Materials Science and Engineering A-Structural Materials Properties Microstructure And Processing, Volume: 800, ISSN: 0921-5093
• [6] Raffaeli, R. - Favi, C. - Mandorli, F.: Virtual Prototyping in the Design Process of Optimized Mold Gating System for High Pressure Die-Casting - 2015. In: Engineering Computations, Volume 32, Issue 1, Page 102-128, ISSN 0264-4401
• [7] Ružbarský, J. - Paško, J. - Gašpár, Š.: Techniques of Die-Casting. Lüdenscheid: Ram- Verlag - 2014. - 199 P. - ISBN 978-3-942303-29-3
• [8] Muenstermann, S. - Kuethe, F. - Buenck, M. Et Al.: Near-Net Shaping of the Geometrically Complex Diving Knife by Semisolid Steel Casting Using Ceramic Mold System - 2011. In: International Journal of Cast Metals Research, Volume: 24, Issue: 1, Pages: 6-12, ISSN: 1364-0461
• [9] Ragan, E. At Al.: Liatie Kovov Pod tlakom. 1. Prešov, 2007, 392 S., ISBN 978-80-8073- 979-9.
• [10] Stein, S. - Wedler, J. - Rhein, S. Et Al.: A Process Chain for Integrating Piezoelectric Transducers Into Aluminum Die-Castings To Generate Smart Lightweight Structures - 2017. In: Results in Physics, Volume: 7, Pages: 2534-2539, ISSN: 2211-3797
• [11] Gašpar, Š. - Paško, J.: Pressing Speed, Specific Pressure and Mechanical Properties of Aluminium Cast - 2016. In: Archives of Foundry Engineering, Volume: 16, Issue: 2, Pages: 45-50, ISSN: 1897-3310
• [12] Szymczak, T. - Gumienny, G. - Klimek, L. Et Al.: Characteristics of Al-Si Alloys With High Melting Point Elements for High Pressure Die-Casting - 2020. In: Materials, Volume: 13, Issue: 21, ISSN 1996-1944
• [13] Ružbarský, J. - Majerník, R.: Theoretical Regulation of Delimitation of Metal Level Decrease in the Furnace in Case of Pneumatic Dosing Device of Metal - 2017. In: Manufacturing Technology. Vol. 17, No. 1 (2017), P. 84-86. - ISSN 1213-2489
• [14] Maidin, S. - Yi, Tm. - Hambali, A. - Akmal, S. - Hambali, Rh. - Abdullah, Z.: Investigation of Optimum Gating System Design of Fused Deposition Modelling Pattern For Sand Casting - 2017. In: Journal of Mechanical Engineering and Sciences, Volume 11, Issue 3, Page 2801-2814, ISSN 2289-4659
• [15] Gašpar, Š. - Paško, J.: Technological Parameters Of Die-Casting and Quality of Casting from En Ac46500 Alloy - 2016. In: Metalurgija, Volume: 55, Issue: 3, Pages: 391-394, ISSN: 0543-5846
• [16] Chang, Q. - Schwam, D. - Chen, C. - Xiong, J. - Wallace, Jf.: Mold Filling Process Control of Molten Aluminum in Permanent Molds With a Web Gating System - 2008. In: Materials Science Forum Book Series Materials Science Forum, Volume 575-578, Page 63-+, Part 1-2, ISSN 0255-5476
• [17] Ružbarský, J.: Al-Si Alloy Casts by die-Casting a Case Study - 1. Vyd. - Cham : Springer Nature - 2019. - 71 S. - ISBN 978-3-030-25149-9
• [18] Ružbarský, J. - Sitko, J.: Possibilities Of Pressure Die-Casting Of Iron Alloys - 2019. In: Management Systems In Production Engineering - 2019. Vol. 27, No. 4 (2019), S. 199-204, ISSN 2299-0461
• [19] Stachovec, I. - Horacek, M. - Zemcik, L. - Kolda, V. - Horensky, J.: Gating Systems for Sizeable Castings From al Alloys Cast Into Ceramic Molds - 2012. In: Archives of Foundry Engineering, Volume 12, Issue 2, Page 65-68, ISSN 1897-3310
• [20] Lee, Ks. - Lin, Jc.: Design of the Runner and Gating System Parameters For a Multi- Cavity Injection Mold Using Fem and Neural Network - 2006. In: International Journal of Advanced Manufacturing Technology, Volume 27, Issue11-12, Page1089- 1096, ISSN 0268-3768
• [21] Majidi, Sh. - Beckermann, C.: Effect of Pouring Conditions and Gating System Design on Air Entrainment During Mold Filling - 2019. In: International Journal of Metalcasting, Volume 13, Issue 2, Page 255-272, ISSN 1939-5981
• [22] Ragan, E. - Ružbarský, J.: Parameters Stating in the Die Cavity - 2006. In: Materiálové Inžinierstvo, Vol. 13, No. 3, P. 21-22, - ISSN 1335-0803
• [23] Yuan, Ly. - Han, Pw. - Asghar, G. Et Al.: Development of High Strength and Toughness Non-Heated Al-Mg-Si Alloys for High-Pressure Die-Casting - 2021. In: Acta Metallurgica Sinica-English Letters, Volume: 34, Issue: 6, Pages: 845-860, ISSN: 1006-7191
• [24] Ge, Zh. - Qu, Y. - Zhou, Ya.: Cad Of Gating System for Injection Mold Based on the Secondary Development Technology Of Pro/E - 2011. In: Manufacturing Processes and Systems, Pts 1-2, Book Series Advanced Materials Research, Volume 148-149, Page 453-457, ISSN 1022-6680
• [25] Majerník, J. - Gerková, J.: Vplyv Konštrukcie Vtokového Systému Na Kvalitu Odliatkov. Posterus. Sk. 2014, Roč. 7, Č. 8, P. 1-5, 6 pp. ISSN 1338-0087
• [26] Wang, F. - Ma, Q. - Meng, W. Et Al.: Experimental Study on the Heat Transfer Behavior and Contact Pressure at the Casting-Mold Interface in Squeeze Casting of Aluminum Alloy - 2017. In: International Journal of Heat And Mass Transfer, Volume: 112, Pages: 1032-1043, ISSN: 0017-9310
• [27] Sharifi, A. - Abadi, Mmh. - Ashiri, R.: Direct Observation Of Effects of Foam Density, Gating Design and Pouring Temperature on Mold Filling Process In Lost Foam Casting of A356 Alloy - 2015. In: Proceedings of the TMS Middle East - Mediterranean Materials Congress on Energy and Infrastructure Systems (Mema 2015), Page 109-118, ISBN 978-1-119-09042-7
• [28] Sun, Z. - Hu, H. - Chen, X. - Wang, Q. - Yang, W.: Gating System Design For a Magnesium Alloy Casting - 2008. In: Journal of Materials Science & Technology, Volume 24, Issue 1, Page 93-95, ISSN 1005-0302
• [29] Zhang, Jz. - Zuo, Lj. - Feng, J. Et Al.: Effect of Thermal Exposure on Microstructure and Mechanical Properties of Al-Si-Cu-Ni-Mg Alloy Produced by Different Casting Technologies - 2020. In: Transactions of Nonferrous Metals Society of China, Volume: 30, Issue: 7, Pages: 1717-1730 ISSN: 1003-6326