Development of the mathematical model of the hydraulic drive of the lift mechanism of the working equipment of the front loader

• Autorzy: Veselovskaya Natalia , Shargorodskyi Serhiy , Rutkevich Volodymyr , Kupchuk Ihor , Burlaka Serhii

Identyfikatory

DOI

10.15199/48.2023.10.06

Warianty tytułu

PL

Opracowanie modelu matematycznego napędu hydraulicznego mechanizmu podnoszenia osprzętu roboczego ładowacza czołowego

• Języki publikacji: EN

Abstrakty

EN

This article presents the development of a mathematical model for the hydraulic drive of the lift mechanism of the working equipment of a front loader. The aim of the study is to optimize the performance of the lift mechanism by accurately modeling its hydraulic system. The model is developed using the principles of fluid mechanics and the governing equations are derived for the hydraulic system. The model is then validated using experimental data obtained from the lift mechanism of an actual front loader.

PL

W artykule przedstawiono opracowanie modelu matematycznego napędu hydraulicznego mechanizmu podnoszenia osprzętu roboczego ładowacza czołowego. Celem badań jest optymalizacja pracy mechanizmu podnoszącego poprzez dokładne modelowanie jego układu hydraulicznego. Model został opracowany z wykorzystaniem zasad mechaniki płynów, a równania rządzące układem hydraulicznym zostały wyprowadzone. Model jest następnie weryfikowany przy użyciu danych eksperymentalnych uzyskanych z mechanizmu podnoszenia rzeczywistej ładowarki czołowej.

Słowa kluczowe

EN

front loader; lifting mechanism; hydraulic drive; mathematical model; technological load; hydraulic cylinder

PL

ładowacz czołowy; mechanizm podnoszenia; napęd hydrauliczny; model matematyczny; obciążenie technologiczne; siłownik hydrauliczny

• Wydawca: Wydawnictwo SIGMA-NOT
• Czasopismo: Przegląd Elektrotechniczny
• Rocznik: 2023
• Tom: R. 99, nr 10
• Strony: 34--38
• Opis fizyczny: Bibliogr. 27 poz., rys.

Twórcy

autor

Veselovskaya Natalia

• Faculty of Engineering and Technology, Vinnytsia National Agrarian University (21008, 3 Sonyachna str., Vinnytsia, Ukraine)

• https://orcid.org/0000-0001-9399-6721

autor

Shargorodskyi Serhiy

• Faculty of Engineering and Technology, Vinnytsia National Agrarian University (21008, 3 Sonyachna str., Vinnytsia, Ukraine)

• https://orcid.org/0000-0003-2125-773X

autor

Rutkevich Volodymyr

• Faculty of Engineering and Technology, Vinnytsia National Agrarian University (21008, 3 Sonyachna str., Vinnytsia, Ukraine)

• https://orcid.org/0000-0002-6366-7772

autor

Kupchuk Ihor

• Faculty of Engineering and Technology, Vinnytsia National Agrarian University (21008, 3 Sonyachna str., Vinnytsia, Ukraine)

• https://orcid.org/0000-0002-2973-6914

autor

Burlaka Serhii

• Faculty of Engineering and Technology, Vinnytsia National Agrarian University (21008, 3 Sonyachna str., Vinnytsia, Ukraine)

• https://orcid.org/0000-0002-4079-4867

Bibliografia

• [1]. Shargorodskiy S., Rutkevych V., Kupchuk I., Hraniak V., Didyk A. Investigation of drive power of the mechanism for separation of stem feed from feed monolith. Agricultural engineering. 54 (2022), 27–38. https://doi.org/10.15544/ageng.2022.54.4
• [2]. Ratushna N., Mahmudov I., Kokhno A. Methodical approaches to the creation of new agricultural machinery in accordance with the requirements of the market of science-intensive products. MOTROL. (2007), nr 9А, 119–123.
• [3]. Ivanov M.I., Rutkevych V.S., Kolisnyk O.M., Lisovoy I. O. Research of the influence of the parameters of the block-portion separator on the adjustment range of speed of operating elements. INMATEH – Agricultural Engineering. 57 (2019), nr 1, 37-44.
• [4]. Rutkevych V., Kupchuk I., Yaropud V., Hraniak V., Burlaka S. Numerical simulation of the liquid distribution problem by an adaptive flow distributor. Przegląd Elektrotechniczny. 98 (2022), nr 2, 64-69. https://doi.org/10.15199/48.2022.02.13
• [5]. Yaropud, V. Analytical study of the automatic ventilation system for the intake of polluted air from the pigsty. Scientific horizons. 24 (2021), nr. 3, 19-27. https://doi.org/10.48077/scihor.24(3).2021.19-27
• [6]. Hraniak V.F., Matviychuk V.A., Kupchuk I.M. Mathematical model and practical implementation of transformer oil humidity sensor. Electronics. 26 (2022), nr 1, 3-8. https://www.doi.org/10.53314/ELS2226003H
• [7]. Baranovsky V., Truhanska O., Pankiv M., Bandura V. Research of a contact impact of a root crop with a screw auger. Research in Agricultural Engineering. 66 (2020), nr 1, 33-42. https://www.doi.org/10.17221/75/2017-RAE
• [8]. Gunko I., Babyn I, Aliiev E., Yaropud V., Hrytsun A. Research into operating modes of the air injector of the milking parlor flushing system. UPB Scientific bulletin, Series D: Mechanical Engineering, 83 (2021), nr. 2, 297-310.
• [9]. Тurych V., Veselovska N., Rutkevych V., Shargorodsky S. Investigation of the process of thread extrusion using the ultrasound. Eastern-European Journal of Enterprise technologies. 6 (2017), nr 1 (90), 60-68. https://doi.org/10.15587/1729-4061.2017.114564
• [10]. Тurych V., Rutkevych V., Goncharuk N., Ogorodnichuk G. Investigation of the process smoothing with ultrasonic. Eastern European Journal of Enterprise technologies. 3 (2018), nr 1 (93), 22-33. https://doi.org/10.15587/1729-4061.2018.131047
• [11]. Shargorodskiy S., Rutkevych V. Influence of physical and mechanical properties of stem feed and design of the working body on the drive power of the cutting mechanism. Engineering, power engineering, transport of agroindustrial complexes, 113 (2021), nr 2, 38–49. https://doi.org/10.37128/2520-6168-2021-2-5
• [12]. Rutkevych V. S. Research of stability of adaptive system of hydraulic drives of the block-portion separator of canned food. Engineering, power engineering, transport of agroindustrial complexes, 103 (2018), nr 4, 29–34. https://doi.org/10.37128/2306-8744-2021-2-12
• [13]. Ivanov M., Pereyaslavskyy O., Shargorodskiy S. at all. Vibration resistance of HST 90 hydrostatic transmission. Journal of Physics: Conference Series, Volume 1741, XVI International Scientific and Engineering Conference Hermetic Sealing, Vibration Reliability and Ecological Safety of Pump and Compressor Machinery – HERVICON+PUMPS-2020, 8-11 September (2020), Sumy, Ukraine. https://doi.org/10.1088/1742-6596/1741/1/012051
• [14]. Sereda L.P., Rutkevich V.S., Ziniev M.V. Study of the mathematical model of hydraulic drives segment-finger mower unit. Technology, energy, transport of agricultural industry. 100 (2018), nr 1, 111–123.
• [15]. Ivanov N., Shargorodskii S., Rutkevich V. Mathematical model of hydraulic drive of block-batch separator of canned feed, MOTROL, (2013), nr 5, 83–91.
• [16]. Rutkеvych V.S. Adaptive hydraulic drive block-portable of canned forage block-batch separator. Engineering, power engineering, transport of agroindustrial complexes. (2017), nr 3, 108-113.
• [17]. Rutkevich V.S., Kushnir V.P., Ganzha V.V. Mathematical model of the hydraulic cutter drive for separating and unloading a block portion of feed from a feed monolith. Bulletin of the Khmelnytskyi National University. Series: technical sciences, (2022), nr 5 (313), 189–195. https://www.doi.org/10.31891/2307-5732-2022-313-5-189-195
• [18]. Gunko I., Hraniak V., Yaropud V., Kupchuk I., Rutkevych V. Optical sensor of harmful air impurity concentration. Przegląd elektrotechniczny. 97 (2021), nr 7, 76-79. https://doi.org/10.15199/48.2021.07.15
• [19]. Kupchuk I., Burlaka S., Galushchak A., Yemchyk T., Galushchak D., Prysiazhniuk Yu. Research of autonomous generator indicators with the dynamically changing component of a two-fuel mixture. Polityka Energetyczna. 25 (2022), nr. 2, 147–162. https://doi.org/10.33223/epj/150746
• [20]. Yaropud V., Kupchuk I., Burlaka S., Poberezhets Ju., Babyn I. Experimental studies of design-and-technological parameters of heat exchanger. Przegląd Elektrotechniczny. 98 (2022), nr. 10, 57-60. https://doi.org/10.15199/48.2022.10.10
• [21]. Honcharuk I., Kupchuk I., Yaropud V., Kravets R., Burlaka S., Hraniak V., Poberezhets Ju., Rutkevych V. Mathematical modeling and creation of algorithms for analyzing the ranges of the amplitude-frequency response of a vibrating rotary crusher in the software Mathcad. Przegląd Elektrotechniczny. 98 (2022), nr 9, 14-20. https://doi.org/10.15199/48.2022.09.03
• [22]. Shargorodskyi S, Rutkevych V., Zakrevskyi V. Modeling of working processes of an adjustable APN type PVC 1.85 taking into account parametric oscillations. Collection of scientific papers of the Kirovohrad National Technical University. Machinery in agricultural production, industrial engineering, automation. 4 (2021), nr 35, 33–43. https://doi.org/10.32515/2664-262X.2021.4(35).33-43
• [23]. Shargorodskyi S.A., Rutkevich V.S., Yashchuk E.V. Development of a mathematical model of a hydraulic drive for deploying sections of a wide-grip agricultural machine. Technology, energy, transport of agricultural industry. 115 (2021), nr 4, 148–158.
• [24]. Rutkevich V.S., Shargorodskyi S.A., Kushnir V.P., Ostapchuk O.O. Determination of the speed adjustment range of the working organs of the mechanism for separating stem fodder by means of mathematical modeling. Technology, energy, transport of agricultural industry. 117 (2022), nr 2, 135–145.
• [25]. Hunko I., Tsurkan O., Shargorodskiy S., Shchur T., Beloev H., Kovalyshyn O., Domin M. The influence of wave processes of hydraulic oilson the operation of a hydraulic drive. Agricultural Engineering. 26 (2022), nr 1, 91-104. https://doi.org/10.2478/agriceng-2022-0008
• [26]. Tsurkan O., Kupchuk I., Polievoda Y., Wozniak O., Hontaruk Y., Prysiazhniuk Y. Digital processing of one-dimensional signals based on the median filtering algorithm. Przegląd Elektrotechniczny. 98 (2022), nr 11, 51-56. https://doi.org/10.15199/48.2022.11.08
• [27]. Ivanov M., Shargorodskiy S., Pereyaslavskyy O., Motorna O., Gromaszek K., Junisbekov M., Kalizhanova A., Smailova S. Method of experimental research of steering control unit of hydrostatic steering control systems and stands for their realization. Mechatronic Systems 1. 2021, 101-112. https://doi.org/10.1201/9781003224136-9