Application of incremental sheet forming

• Autorzy: Karbowski K.

Identyfikatory

DOI

10.1515/mper-2015-0036

• Języki publikacji: EN

Abstrakty

EN

This paper describes some manufacturing aspects and an example of application of the Incremental Sheet Forming (ISF) technology which was used for production of the craniofacial prosthesis. The brief description of prosthesis designing was presented as well. The main topic of the paper is comparison of milling and ISF technologies for preparing the tools for prosthesis thermoforming.

Słowa kluczowe

EN

sheet forming; milling centre; prosthesis

• Wydawca: Production Engineering Committee of the Polish Academy of Sciences ; Polish Association for Production Management
• Czasopismo: Management and Production Engineering Review
• Rocznik: 2015
• Tom: Vol. 6, No. 4
• Strony: 55--59
• Opis fizyczny: Bibliogr. 12 poz., rys., zdj.

Twórcy

autor

Karbowski K.

• Cracow University of Technology, Institute of Production Engineering, Poland

Bibliografia

• [1] Emmens W.C., Sebastiani G., van den Booggard A.H, The technology of Incremental Sheet Forming - A brief review of the history, Journal of Materials Processing Technology, 210, 981-997, 2010.
• [2] Park J.-J., Kim Y.-H., Fundamental studies on the incremental sheet metal forming technique, Journal of Materials Processing Technology, 140, 447-453, 2003.
• [3] Kopac J., Kampus Z., Incremental sheet metal forming on CNC milling machine-tool, Journal of Materials Processing Technology, 162-163, 622-628, 2005.
• [4] Araghi B.T., Manco G.L., Bambach M., Hirt G., Investigation into a new hybrid forming process: Incremental sheet forming combined with stretch forming, Manufacturing Technology, 58, 225-228, 2009.
• [5] Kim T.J, Yang D.Y, Improvement of formability for the incremental sheet metal forming process, Inter-national Journal of Mechanical Sciences, 42, 1271- 1286, 2000.
• [6] Shim M.-S., Park J.-J., The formability of aluminium sheet in incremental forming, Journal of Materials Processing Technology, 113, 654-658, 2001.
• [7] Ambrogio G., De Napoli L., Filice L., et. al., Application of Incremental Forming process for high customised medical product manufacturing, Journal of Materials Processing Technology, 162-163, 156-162, 2005.
• [8] Petek A., Kuzman K., Kopac J., Deformations and forces analysis of single point incremental sheet metal forming, Archives of Materials Science and Engineering, 35, 2, 107-116, 2009.
• [9] http://www.ennex.com/∼fabbers/StL.asp
• [10] Karbowski K., Edge detection in reverse engineering system, Advances in manufacturing science and technology, 34, 4, 63-72, 2010.
• [11] http://codubix.com/characteristics-of-codubixand-codubix-3d/
• [12] Karbowski K., Moskała M., Polak J., Sujka W., Urbanik A., The application of computed tomography to develop a Codubixr prosthesis upon patient’s individual request, Acta Clinica et Morphologica, 2, 10-16, 2012.