PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Vibration and displacement analysis during turning of hardened steel

Autorzy
Treść / Zawartość
Identyfikatory
Warianty tytułu
Języki publikacji
EN
Abstrakty
EN
This paper presents an analysis of the vibrations and displacements of the tool during the turning of hardened steel for various turning parameters. Studies have shown that an increase in feed from 0.1 to 0.35 mm / rev results in an almost two-fold increase in radial displacement of the tool. It has also been shown that the combination of high feeds and high rotational speed of the workpiece causes a rapid increase in vibration in all directions.
Słowa kluczowe
Rocznik
Tom
Strony
54--58
Opis fizyczny
Bibliogr. 12 poz., rys., tab.
Twórcy
  • Poznań University of Technology, Piotrowo 3, Poznań 61-138, Poland
Bibliografia
  • [1] Bisu C.F., Darnis P., Gerard A., K'Nevez, J.-Y. Displacements analysis of self-excited vibrations in turning, International Journal of Advanced Manufacturing Technology44(1-2), pp. 1-16, 2009.
  • [2] Boryczko A., Układ pomiarowy promieniowego przemieszczenia narzędzia względem przedmiotu dla identyfikacji oddziaływań na nierówności powierzchni toczonych. Metrologia i Systemy Pomiarowe, Wydaw. PWN, Warszawa, tom 5, zeszyt 4, 1998.
  • [3] Gong F., Zhao J., Pang J., Evolution of cutting forces and tool failure mechanisms in intermittent turning of hardened steel with ceramic tool, The International Journal of Advanced Manufacturing Technology, 89, Issue 5, pp. 1603-1613, 2017.
  • [4] Jóźwik J., Lipski J., Błędy obróbki skrawaniem i ich prognozowanie z wykorzystaniem sztucznych sieci neuronowych, Wydawnictwo Politechniki Lubelskiej, Lublin 2014.
  • [5] Kurt A., Yalçin B., Yilmaz N., The cutting tool stresses In finish Turing of hardened steel with mixed ceramic tool. International Journal of Advanced Manufacturing Technology 80 issue 1-4, pp. 315-325, 2015.
  • [6] Mehdi K., Rigaal J. F., Play D., Dynamic behavior of a thin-walled cylindrical workpiece during the turning process, Part 1: Cutting process simulation „Transaction of the ASME Journal of Manufacturing Science and Engineering”, 124, pp. 562-568, 2012.
  • [7] Pimenov, D.Y., Guzeev, V.I., Krolczyk, G., Mia, M., Wojciechowski, S., Modeling flatness deviation in face milling considering angular movement of the machine tool system components and tool flank wear, Precision Engineering54, pp. 327-337, 2018.
  • [8] Pimenov, D.Y., Hassui, A., Wojciechowski, S., (...), Krolczyk, G., Gupta, M.K., Effect of the relative position of the face milling tool towards the workpiece on machined surface roughness and milling dynamics, Applied Sciences (Switzerland)9(5),0842, 2019.
  • [9] Prasad, B.S., Babu, M.P., Reddy, Y.R., Evaluation of correlation between vibration signal features and three dimensional finite element simulations to predict cutting tool wear in turning operation, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture230(2), pp. 203-214, 2016.
  • [10] Tung P. D., Mathematical modeling and parametric identification of dynamic properties of mechanical subsystems tool and workpiece in turning process. MATEC Web of Conferences226, 02017, 2018.
  • [11] PN-EN ISO 683-17:2015-01
  • [12] http://www.micro-epsilon.pl/download/optoNCDT1700.artykul.pdf (20.09.2018).
Uwagi
Opracowanie rekordu w ramach umowy 509/P-DUN/2018 ze środków MNiSW przeznaczonych na działalność upowszechniającą naukę (2019).
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-7debf3a8-f8e5-4b5f-add0-8667219958f1
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.