Researching the profile of normal wear of die face

• Autorzy: Melnyk V. O.
• Języki publikacji: EN

Abstrakty

EN

In the article the geometrical form of natural wear of working surface of die is investigated. The research had done with using of the measuring system on the base of three-coordinate machine-tool with numerical program control. As a result of measuring were obtained set of points on which was built the experimental cross-sectional profile of the working surface of worn dies. It was found that profile of natural wear of die is described by the polynomial of the third order with the high degree of authenticity.

Słowa kluczowe

EN

die; wear of die; form of natural wear; measuring system

• Wydawca: Kielce University of Technology
• Czasopismo: Journal of New Technologies in Environmental Science
• Rocznik: 2018
• Tom: Vol. 2, nr 3
• Strony: 116--120
• Opis fizyczny: Bibliogr. 9 poz., rys., tab., wykr., wzory

Twórcy

autor

Melnyk V. O.

• Ivano-Frankivsk National Technical University of Oil and Gas, Ukraine

Bibliografia

• [1] Handle GMBH Maschinen und Anlagenbau, Catalogue, http://www.haendle.com.
• [2] Bongioanni Macchine S.p.A., Catalogue, http://www.bongioannimacchine.com.
• [3] Bongioanni stampi, Catalogue, http://www.bongioannistampi.com.
• [4] Barabanshchykov Ju.G.: Formation of the structure and strength of building materials in friction of water-containing raw mixtures (in Russian), Saint Petersburg 2006.
• [5] Handle F. (Ed.): Extrusion in Ceramics, Berlin 2007.
• [6] Barabanshchykov Ju.G.: Friction of the ceramic mass over the metal mass (in Russian), Nauchno-tehnicheskie vedomosti, 1, 117, Saint Petersburg 2011, pp. 268-278.
• [7] Vyshnevskyi O.A.: Analytical determination of the criterion of material abrasion (in Ukrainian), Visnyk NAU, 3-4, 2007, pp. 96-100.
• [8] Shults V.V.: Form of natural wear of machine parts and tool (in Russian), Leningrad 1990.
• [9] Reshetov D.N.: Service ability and reliability of machine parts (in Russian), Moskow 1974.

Uwagi

PL

Opracowanie rekordu w ramach umowy 509/P-DUN/2018 ze środków MNiSW przeznaczonych na działalność upowszechniającą naukę (2019).