PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Processing And Properties Of MAX Phases – Based Materials Using SHS Technique

Treść / Zawartość
Identyfikatory
Warianty tytułu
PL
Wytwarzanie oraz właściwości tworzyw typu MAX otrzymywanych za pomocą techniki SHS
Języki publikacji
EN
Abstrakty
EN
Authors present results of works on the interesting new group of advanced ceramics called MAX phases – Ti-based ternary carbides and nitrides. They have an original layered structure involved highly anisotropic properties laying between ceramics and metals, with high elastic modulus, low hardness, very high fracture toughness and high electrical and heat conductivity. Using Self-Propagating High-Temperature Synthesis (SHS) in the combustion regime it is possible to prepare MAX phases-rich powders that can be used as the precursors for preparation of dense MAX polycrystals by presureless sintering or hot-pressing. Different novel Ti-based phases with layered structures, namely: Ti3AlC2 and Ti2AlC have been synthesized in a combustion regime. The possibility of controlling of combustion phenomena for obtaining near single-phase products is discussed in details as well as some of properties of the materials tested as structure and functional ceramics.
PL
Autorzy przedstawiają wyniki badań nad nową interesującą grupą zaawansowanych materiałów ceramicznych nazywanych fazami MAX – potrójnymi węglikami i azotkami tytanowymi. Posiadają one oryginalną strukturę warstwową, z której wynikają silnie anizotropowe właściwości (wysokie moduły sprężystości, niska twardość, bardzo wysoka odporność na kruche pękanie, dobre właściwości elektryczne i cieplne) umiejscawiające je pomiędzy ceramiką a metalami. Dzięki zastosowaniu Samorozwijającej się Syntezy Wysokotemperaturowej SHS możliwe było otrzymywanie bogatych w fazy MAX proszków, mogących służyć jako prekursory w preparatyce gęstych polikryształów za pomocą spiekania pod ciśnieniem lub swobodnego. Przeprowadzone zostały syntezy dwóch materiałów warstwowych: Ti3AlC2 i Ti2AlC. W artykule przedstawiono możliwości kontrolowania procesu spalania w celu uzyskania niemal jednofazowych produktów a także przedstawiono niektóre właściwości badanych materiałów pod kątem zastosowania jako materiały funkcjonalne i strukturalne.
Słowa kluczowe
Twórcy
autor
  • AGH University of Science and Technology, Faculty of Materials Science And Ceramics, al. A. Mickiewicza 30, 30-059 Kraków, Poland
autor
  • AGH University of Science and Technology, Faculty of Materials Science And Ceramics, al. A. Mickiewicza 30, 30-059 Kraków, Poland
autor
  • AGH University of Science and Technology, Faculty of Materials Science And Ceramics, al. A. Mickiewicza 30, 30-059 Kraków, Poland
  • AGH University of Science and Technology, Faculty of Materials Science And Ceramics, al. A. Mickiewicza 30, 30-059 Kraków, Poland
autor
  • AGH University of Science and Technology, Faculty of Physics and Applied Computer Science, al. A. Mickiewicza 30, 30-059 Kraków, Poland
Bibliografia
  • [1] W. Jeitschko, H. Nowotny, F. Benesovsky, Monatsh. Chem. 94, 672 (1963).
  • [2] H. Nowotny, Prog. Solid State Chem. 2, 27 (1970).
  • [3] M.W. Barsoum, Prog. Solid State Chem. 28, 201 (2000).
  • [4] P. Eklund, M. Beckers, U. Jansson, H. Hogberg, L. Hultman, Thin Solid Films 518, 1851 (2010).
  • [5] N.J. Lane, M. Naguib, J. Lu, L. Hultman, M.W. Barsoum, J. Eur. Ceram. Soc. 32, 3485 (2012).
  • [6] Y. Bai, X. He, C. Zhu, G. Chen, J. Am. Ceram. Soc. 95 [1], 358 (2012).
  • [7] M.W. Barsoum, MAX Phases: Properties of Machinable Ternary Carbides and Nitrides, Weinheim 2013.
  • [8] X.H. Wang, Y.C. Zhou, J. Mater. Sci. Technol. 26(5), 385 (2010).
  • [9] M. Radovic, M.W. Barsoum, Am. Ceram. Soc. Bull. 92[3], 20 (2013).
  • [10] M.W. Barsoum, Physical properties of MAX phases, in: K.H.J.Buschow, R.W. Cahn, M.C. Flemings, E.J. Kramer, S. Mahajan, and P. Veyssiere (Ed.), Encyclopedia of Materials 2006, Elsevier (2006).
  • [11] M. Sundberg, G. Malmqvist, A. Magnusson, T. El-Raghy, Ceram. Int. 30, 1899 (2004).
  • [12] J. Lis, Spiekalne proszki związków kowalencyjnych otrzymywane metodą Samorozwijającej się Syntezy Wysokotemperaturowej (SHS), Kraków 1994.
  • [13] L. Chlubny, J. Lis, Ceram. Trans. 240, 79 (2013).
  • [14] L. Chlubny, J. Lis, M.M. Bućko, Ceram. Eng. Sci. Proc. 34[13], 265 (2013).
  • [15] M. Lopcinski, J. Puszynski, J. Lis, J. Am. Ceram. Soc. 84[12], 3051 (2001).
  • [16] A.G. Zhou, C.A. Wang, Z.B. Ge, L.F. Wu, J. Mater. Sci. Lett. 21, 1971 (2001).
  • [17] Y. Khoptiar, I. Gotman, Mater. Lett. 57[1], 72 (2002).
  • [18] G. Liu, K.X. Chen, J.M. Guo, H.P. Zhou, J.M.F. Ferreira, Mater. Lett. 61, 779 (2007).
  • [19] L. Chlubny, J. Lis, M.M. Bućko, Adv. Sci. Tech. 63, 282 (2010).
  • [20] J. Lis, L. Chlubny, M. Lopacinski, L. Stobierski, M.M. Bućko, J. Eur. Ceram. Soc. 28, 1009 (2008).
  • [21] L. Chlubny, M.M. Bućko, J. Lis, Adv. Sci. Tech. 45, 1047 (2006).
  • [22] L. Chlubny, J. Lis, M.M. Bućko, Ceram. Eng. Sci. Proc. 31[10], 153 (2010).
  • [23] L. Chlubny, J. Lis, M.M. Bućko, in: MS&T Pittsburgh 09: Material Science and Technology 2009 Proceedings, Wiley, 2205 (2009).
  • [24] ”Joint Commitee for Powder Diffraction Standards: International Center for Diffraction Data”.
  • [25] H.M. Rietveld, J. Appl. Cryst. 2, 65 (1969).
  • [26] J. Piekarczyk, H.W. Hennicke, R. Pampuch, Cfi/Ber.D.K.G. 59, 227 (1982).
Uwagi
EN
This work was supported by the National Science Centre under the grant no. 2472/B/T02/2011/40.
PL
Opracowanie ze środków MNiSW w ramach umowy 812/P-DUN/2016 na działalność upowszechniającą naukę.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-7d4a3bd8-1387-4f99-a658-a4766029514f
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.