Dynamic Characteristics of 4-Lobe Journal BearingWith Partial Sliding Surfaces

• Autorzy: Strzelecki S.
• Języki publikacji: EN

Abstrakty

EN

Multilobe journal bearings applied in grinding machines assure that the grinding spindle operate with very good preciseness of rotational motion and at very convenient cooling conditio of oil film. An example of such bearings is the 4-lobe bearing with partial sliding surfaces characterised by short angular length and closed in the bearing housing fully filled with the lubricant, i.e. fully flooded bearing. For the evaluation of bearing operation the dynamic characteristics expressed by the stiffness and damping coefficients were computed on the assumption laminar, adiabatic model of oil film. Developed code of computation allows the analysis of the different combinations of geometric and exploitation parameters including the pressurized oil supply.

Słowa kluczowe

EN

multilobe journal bearings; dynamic characteristics

• Wydawca: Oficyna Wydawnicza Politechniki Warszawskiej
• Czasopismo: Machine Dynamics Research
• Rocznik: 2016
• Tom: Vol. 40, No. 4
• Strony: 71--78
• Opis fizyczny: Bibliogr. 7 poz., fot., rys., tab., wykr.

Twórcy

autor

Strzelecki S.

• Research Development Centre of Textile Machinery

Bibliografia

• 1. Bently, D. E. and Franklin,W. (2001). New pressurized bearing kills frequency shifts in rotating machinery. ORBIT, Second Quarter.
• 2. Gasch, R. and Pfützner, H. (1975). Rotordynamik. Springer-Verlag.
• 3. Ghoneam, S. and Strzelecki, S. (2006). Thermal problems of multilobe journal bearings. Meccanica, 41:571–579.
• 4. Glienicke, J., Han, D., and Leonhard, M. (1981). Eigenschaften von gleitlagern bei hohen umfangsgeschwindigkeiten. Konstruktion, 33(1981):441–448.
• 5. Glienicke, J., Han, D., and Leonhard, M. (2006). Dynamic characteristics and stability of multilobe and tilting-pad journal bearings. Proc. of the Int. Conference on “Aviation and rocket-space technology with the use of new technical solutions”. 1-3 November 2006. Rybinsk, 2:80–91.
• 6. Strzelecki, S. and Blachura, J. (2008). Effect of side sealing on the static characteristics of cylindrical journal bearing. Zeszyty Naukowe Politechniki Świętokrzyskiej. Nauki Techniczne, (10, Vol. 1):77–85.
• 7. Strzelecki, S. and Socha, Z. (2011). Operating temperatures of the bearing system of grinder spindle. Tribologia: tarcie, zużycie, smarowanie, (2):157–167.