PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Measuring data acquisition hardware for electrical impedance tomography

Treść / Zawartość
Identyfikatory
Warianty tytułu
PL
System akwizycji danych w elektrycznej tomografii impedancyjnej
Języki publikacji
EN
Abstrakty
EN
This article presents the design of the device with active electrodes to examine the flood embankment. There was discussed the method of determining the conductivity. The presented solution was based on electrical impedance tomography. There was described the concept of active electrodes and measuring equipment for data acquisition. Electrical impedance tomography, which is based on measuring potential difference, can be used to calculate conductivity. The problem depends on the fact that every material has unique conductance.
PL
W tym artykule przedstawiono konstrukcję urządzenia z aktywnymi elektrodami do badania stanu wału przeciwpowodziowego. Omówiono metodę wyznaczania konduktywności. Prezentowane rozwiązanie zostało oparte na elektrycznej tomografii impedancyjnej. Opisano koncepcję aktywnych elektrod i sprzętu pomiarowego do akwizycji danych. Elektryczna tomografia impedancyjna, która jest oparta na pomiarze różnicy potencjałów może być użyta do pomiaru konduktywności. Sposób, w jaki może być zdefiniowany polega na tym, że każdy materiał ma unikalną przewodność.
Rocznik
Strony
88--91
Opis fizyczny
Bibliogr. 14 poz., rys.
Twórcy
autor
  • 1Netrix S.A., Research and Development Center, ul. Związkowa 26, 20-148 Lublin
autor
  • 1Netrix S.A., Research and Development Center, ul. Związkowa 26, 20-148 Lublin
autor
  • 1Netrix S.A., Research and Development Center, ul. Związkowa 26, 20-148 Lublin
autor
  • 1Netrix S.A., Research and Development Center, ul. Związkowa 26, 20-148 Lublin
autor
  • Lublin University of Technology, Institute of Electronics and Information Technology
  • Electrotechnical Institute
Bibliografia
  • [1] Adler A., Lionheart W.R.B.: Uses and abuses of EIDORS: an extensible software base for EIT, Physiological Measurement, Vol. 27, 2006.
  • [2] Gunna D.A., Chambersa J.E., Uhlemanna S., Wilkinsona P.B., Meldruma P.I., Dijkstraa T.A.: Moisture monitoring in clay embankments using electrical resistivity tomography, Construction and Building Materials, 2014.
  • [3] Hoła J., Matkowski Z., Schabowic K., Sikora J., Nita K., Wójtowicz S.: Identification of Moisture Content in Brick Walls by means of Impedance Tomography, COMPEL, Vol. 31, Issue 6, 2012, 1774–1792.
  • [4] Holder D.S.: Electrical Impedance Tomography: Methods, History and Applications Series in Medical Physics and Biomedical Engineering, London 2005.
  • [5] Jones G., Sentenac P., Zielinski M.: Desiccation cracking detection using 2-D and 3-D Electrical Resistivity Tomography: Validation on a flood embankment, Journal of Applied Geophysics, Vol. 106, 2014.
  • [6] Leondes C.T.: Medical imaging system techniques and applications, Gordon and Breach Science Publishers, Amsterdam 1997.
  • [7] Rymarczyk T. “Using electrical impedance tomography to monitoring flood banks”, International Journal of Applied Electromagnetics and Mechanics 45, 2014, 489–494.
  • [8] Rymarczyk T., Filipowicz S.F., Sikora J., Polakowski K.: A piecewise-constant minimal partition problem in the image reconstruction, Przegląd Elektrotechniczny, R. 85 NR 12/2009, 141–143.
  • [9] Rymarczyk T., Adamkiewicz P., Duda K., Szumowski J., Sikora J.: New Electrical Tomographic Method to Determine Dampness in Historical Buildings, Achieve of Electrical Engineering, v.65, 2/2016, 273–283.
  • [10] Sankowski D., Sikora J.: Electrical capacitance tomography: Theoretical basis and applications, Wydawnictwo IEL, Warszawa 2010.
  • [11] Sikora J., Wójtowicz S.: Industrial and Biological Tomography: Theoretical Basis and Applications, Wydawnictwo IEL, Warszawa 2010.
  • [12] Smolik W., Radomski D, Performance evaluation of the iterative imagereconstruction algorithm with sensitivity matrix updating based on real measurements for electrical capacitance tomography, Meas. Sci. Technol. Vol. 20, No. 11, 2009, 115502.
  • [13] Wajman R., Fiderek P., Fidos H., Jaworski T., Nowakowski J., Sankowski D., Banasiak R.: Metrological evaluation of a 3D electrical capacitance tomography measurement system for two-phase flow fraction determination; Meas. Sci. Technol., Vol. 24, 2013, No. 065302.
  • [14] Wang M.: Industrial Tomography: Systems and Applications, Elsevier 2015.
Uwagi
Opracowanie rekordu w ramach umowy 509/P-DUN/2018 ze środków MNiSW przeznaczonych na działalność upowszechniającą naukę (2018).
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-7cd3875b-c391-494c-8603-7383b8e2fc45
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.