Possibilities for determining the interference between a power supply network and a converter fed drive

• Autorzy: Beniak R. , Gardecki A.

Identyfikatory

DOI

10.5277/PED170102

• Języki publikacji: EN

Abstrakty

EN

Measuring instruments, measurement methods, and an exemplary analysis of the impact of chosen operating stages of the converter drive on the power supply network have been presented. The measurements of electrical and mechanical parameters in drive systems used in industry are complex. The task is difficult due to the necessity of connecting a measuring instrument into electric circuits of an active facility with the use of only short non-operational periods of the device. However, a wellchosen model of a drive system allows the multivariate research of the impact of drive parameters and a control algorithm used on voltage and current harmonic content and performance of the system, and therefore on a simulation analysis of the impact of the drive on the power supply network.

Słowa kluczowe

EN

power quality; converter drives; voltage and current measurements

• Wydawca: De Gruyter
• Czasopismo: Power Electronics and Drives
• Rocznik: 2017
• Tom: Vol. 2 (37), No. 1
• Strony: 17--26
• Opis fizyczny: Bibliogr. 9 poz., rys., tab.

Twórcy

autor

Beniak R.

• Opole University of Technology, Faculty of Electrical Engineering, Automatic Control and Informatics, ul. Prószkowska 76, 45-758 Opole, Poland

autor

Gardecki A.

• Opole University of Technology, Faculty of Electrical Engineering, Automatic Control and Informatics, ul. Prószkowska 76, 45-758 Opole, Poland

Bibliografia

• [1] KAHLE K., Power Converters and Power Quality, Proc. CAS-CERN Accelerator School Power Converters, R. Bailey (Ed.), Baden, Switzerland, 7-14 May 2014, CERN-2015-003, Geneva, 2015, 57-82.
• [2] Product Manual NI 6132/6133 Specifications, http://www.ni.com/pdf/manuals/371231d.pdf
• [3] BENIAK R., GARDECKI A., MOCH J., Measurements of electrical drives in dynamic states using dedicated measurement systems, Przegl. Elektrotechn., 2011, 87(2), 9-12 (in Polish).
• [4] BENIAK R., GARDECKI A., MOCH J., Problems of digital electrical measurements in the systems of modern medium and low voltage drives, Measure. Automat. Rob., 2010 (12), 102-105 (in Polish).
• [5] BENIAK R., GARDECKI A., Computationally efficient method of simulation of fan electric driver on the power grid, Arch. Electr. Eng., 2013, 62(1), 77-90.
• [6] KAŹMIERKOWSKI M.P., TUNIA H., Automatic control of converter fed drives, Elsevier, Amsterdam 1994.
• [7] BENIAK R., Determining control algorithms for voltage inverters basing on measurements, 13th Conference Sel. Iss. El. Eng. Electron., Rzeszów 2016.
• [8] BENIAK R., A formalised variable structure method of modeling converter drives, Przegl. Elektrotechn., 2009, 85(3), 83-87.
• [9] VON JOUANNE A., BANERIEE B., Assessment of voltage unbalance, IEEE Trans. Power Del., 2001, 16(4), 782-790.