Identification of Yield Point of Polymer-Based Composite Material in the Conditions of Increased Temperatures

• Autorzy: Arustamian A. , Sołek K. , Kalisz D.

Identyfikatory

DOI

10.1515/amm-2016-0255

• Języki publikacji: EN

Abstrakty

EN

Theoretical and practical research on the influence of temperature on mechanical characteristics of the composite material MM “Steel 1018” has been conducted. Both laboratory equipment used to measure of mechanical properties, the technique of material preparation and the experimental procedure were described. The analysis of the the obtained results revealed that with temperature increase the material yield point goes down.

Słowa kluczowe

EN

mechanical properties; yield point; compression test; composite material

• Wydawca: Institute of Metallurgy and Materials Science of Polish Academy of Sciences ; Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences
• Czasopismo: Archives of Metallurgy and Materials
• Rocznik: 2016
• Tom: Vol. 61, iss. 3
• Strony: 1561--1566
• Opis fizyczny: Bibliogr. 14 poz. fot., rys., wykr.

Twórcy

autor

Arustamian A.

• AGH - University of Science and Technology, Faculty of Foundry Engineering, 30 Mickiewicza Av., Krakow 30-059 Kraków Poland

autor

Sołek K.

• AGH - University of Science and Technology, Faculty of Metals Engineering and Industrial Computer Science, 30 Mickiewicza Av., Krakow, 30-059 Kraków Poland

autor

Kalisz D.

• AGH - University of Science and Technology, Faculty of Foundry Engineering, 30 Mickiewicza Av., Krakow 30-059 Kraków Poland

Bibliografia

• [1] K. V. Donev, Mariupol PSTU (2007).
• [2] A .S. Vorona, Mariupol PSTU (2009).
• [3] S. A. Kalinichenko, Mariupol PSTU (2003).
• [4] A. V. Timoschenko, Mariupol PSTU (2009).
• [5] D. L. Kakareka Mariupol PSTU (2013).
• [6] A. A. Ischenko Mariupol PSTU (2007).
• [7] DIN EN ISO 604:2003-12 (2003)
• [8] O. V. Savinov Stroyizdat (1979).
• [9] A. A. Ischenko, PDTU Mariupol. 24, 258-261 (2012).
• [10] N. Y. Dudareva, S. A. Zagayko, Samouchitel Solidworks. 336 (2006).
• [11] J. Lelito, P. L. Żak, B. Gracz, M. Szucki, D. Kalisz, P. Malinowski, J. S. Suchy, W. K. Krajewski, Metalurgija. 54, 204-206 (2015).
• [12] B. Grabowska, M. Bulwan, S. Zapotoczny, G. Grabowski, Polimery. 57, 529-534 (2012).
• [13] A. Arustamian, D. Kalisz, Archives of Foundry Engineering. 15, 4, 7-10 (2015).
• [14] K. Solek, L. Trębacz, Arch., Metal. Mater. 57, 355 (2012).

Uwagi

EN

The research was performed within the AGH-UST project 11.11.110.225