Tytuł artykułu
Autorzy
Treść / Zawartość
Pełne teksty:
Identyfikatory
Warianty tytułu
Języki publikacji
Abstrakty
In this paper, the design issue of effective damping of electromechanical swings in a medium voltage network with distributed generation by the use of a PSS2A type power system stabiliser is described. This stabiliser was installed in the generating unit with the highest rated power. Time constants of correction blocks, as well as the main gain, were determined by analyzing a single-machine system, generating unit – infinite bus. The time constants were calculated on the basis of the frequency-phase transfer functions both of the electromagnetic moment to the voltage regulator reference voltage and of the generator voltage to the voltage regulator reference voltage, under the assumption of an infinite and real value of the generating unit inertia time constant for various initial generator loads. The main stabiliser gain was calculated by analyzing the position, on the complex plane, of eigenvalues of the state matrix of the single-machine system, linearised around a steady operating point, at the changed value of this gain.
Czasopismo
Rocznik
Tom
Strony
717--729
Opis fizyczny
Bibliogr. 22 poz., rys., wz.
Twórcy
autor
- Department of Electrical Engineering and Computer Science, Silesian University of Technology, Akademicka 10 str., 44-100 Gliwice, Poland
autor
- Department of Electrical Engineering and Computer Science, Silesian University of Technology, Akademicka 10 str., 44-100 Gliwice, Poland
autor
- Department of Electrical Engineering and Computer Science, Silesian University of Technology, Akademicka 10 str., 44-100 Gliwice, Poland
Bibliografia
- [1] He P., Qi P., Ji Y., Li Z., Dynamic interactions stability analysis of hybrid renewable energy system with SSSC, Archives of Electrical Engineering, vol. 70, no. 2, pp. 445–462 (2021), DOI: 10.24425/aee.2021.136995.
- [2] Su M., Dong H., Liu K., Zou W., Subsynchronous oscillation and its mitigation of VSC-MTDC with doubly-fed induction generator-based wind farm integration, Archives of Electrical Engineering, vol. 70, no. 1, pp. 53–72 (2021), DOI: 10.24425/aee.2021.136052.
- [3] Nocoń A., Electromechanical transient states of distributed sources operating within power system, Wydawnictwo Politechniki Śląskiej, Gliwice (2019).
- [4] Tsourakis G., Nanou S., Vournas C.A., Power System Stabilizer for Variable-Speed Wind Generators, IFAC Proceedings Volumes, vol. 44, iss. 1, pp. 11713–11719 (2011), DOI: 10.3182/20110828-6-IT1002.03437.
- [5] Tuttokmagi O., Kaygusuz A., Transient Stability Analysis of a Power System with Distributed Generation Penetration, Proceedings of the 7th International Istanbul Smart Grids and Cities Congress and Fair (ICSG), Istanbul, Turkey, pp. 154–158 (2019), DOI: 10.1109/SGCF.2019.8782325.
- [6] Lubosny Z., Dual Input Quasi-Optimal PSS for Generating Unit with Static Excitation System, IFAC Proceedings Volumes, vol. 39, iss. 7, pp. 267–272 (2006).
- [7] IEEE STd 421.5, IEEE Recommended Practice for Excitation System Models for Power System Stability Studies (2016).
- [8] Kundur P., Power System Stability and Control, McGraw-Hill, Inc. (1994).
- [9] Machowski J., Lubośny Z., Bialek J., Bamby J.R., Power Systems Dynamics. Stability and Control, J. Wiley & Sons, Chichester, New York (2020).
- [10] Paszek S., Nocoń A., Optimisation and Polyoptimisation of Power System Stabilizer Parameters, Lambert, Saarbrücken (2014).
- [11] Paszek S., Nocoń A., Parameter polyoptimization of PSS2A power system stabilizers operating in a multi-machine power system including the uncertainty of model parameters, Applied Mathematics and Computation, vol. 267, pp. 750–757 (2015), DOI: 10.1016/j.amc.2014.12.013.
- [12] Izdebski M., The verification of acceptance requirements for voltage regulators of synchronous generators (in Polish), PhD Thesis, Gdańsk University of Technology, Faculty of Electrical and Control Engineering (2019).
- [13] De Mello F.P., Concordia Ch., Concepts of synchronous machine stability as affected by excitation control, IEEE Trans. on Power Systems, vol. PAS-88, iss. 4, pp. 316–329 (1980).
- [14] Gibbard M.J., Co-ordinated design of multimachine power system stabilisers based on damping torque concepts, IEE Proceedings, vol. 135, Pt. C, no. 4, pp. 276–284 (1988).
- [15] Paszek S., Boboń A., Berhausen S., Majka Ł., Nocoń A., Pruski P., Synchronous generators and excitation systems operating in a power system. Measurements methods and modeling, Monograph, series: Lecture Notes in Electrical Engineering, vol. 631, Springer, Cham (2020).
- [16] North American Electric Reliability Corporation (NERC), Reliability Guideline Power Plant Model Verification and Testing for Synchronous Machines (July 2018).
- [17] Western Electricity Coordinating Council, WECC Power System Stabilizer Tuning Guidelines, available online: http://www.wecc.biz, accessed 16.02.2022.
- [18] Western Electricity Coordinating Council, WECC Power System Stabilizer Design and Performance, available online: http://www.wecc.biz, accessed 16.02.2022.
- [19] IEEE Committee Report, Dynamic Models for Steam and Hydro Turbines in Power System Studies, IEEE Trans. on Power Apparatus and Systems, vol. PAS-92, no. 6, pp. 1904–1915 (1973).
- [20] Mathworks, Inc., Optimization Toolbox Documentation, available online: https://www.mathworks. com/help/optim/index.html, accessed 16.02.2022.
- [21] Yongli Z., Chengxi L., Liangzhong Y., A Faster Estimation Method for Electromechanical Oscillation Frequencies, IEEE Trans. on Power Systems, vol. 34, no. 4, pp. 3280–3282 (2019), DOI: 10.1109/TPWRS.2019.2914855.
- [22] Power Technologies, a Division of S&W Consultants Inc., Program PSS/E application guide, Siemens Power Technologies Inc. (2002).
Uwagi
Opracowanie rekordu ze środków MEiN, umowa nr SONP/SP/546092/2022 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2022-2023).
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-7c609d85-6c0c-49f4-a5dd-93f90e329a2b