Sage-modified polydimethylsiloxane applied as antibacterial wound dressing material

Sarraj, Sara; Szymiczek, Małgorzata; Jędrejek, Dariusz; Soluch, Agata; Kurpanik, Roksana

doi:10.14314/polimery.2024.1.4

Artykuł - szczegóły

Tytuł artykułu

Sage-modified polydimethylsiloxane applied as antibacterial wound dressing material

Autorzy

Sarraj Sara , Szymiczek Małgorzata , Jędrejek Dariusz , Soluch Agata , Kurpanik Roksana

Treść / Zawartość

Pełne teksty:

Pobierz

Identyfikatory

DOI

10.14314/polimery.2024.1.4

Warianty tytułu

Polidimetylosiloksan modyfikowany szałwią jako antybakteryjny materiał opatrunkowy

Języki publikacji

Abstrakty

Materials based on polydimethylsiloxane have been developed with antibacterial activity and mechanical properties required for wound treatment. Sage herb (raw, modified, and polyphenol extract) was used as a filler in an amount of 5 and 10% by weight. Physicochemical, mechanical, and biological properties were examined. The results indicate a beneficial effect of sage modification on the tested properties.

Na bazie polidimetylosiloksanu opracowano materiały o działaniu przeciwbakteryjnym i właściwościach mechanicznych wymaganych przy leczeniu ran. Jako napełniacz zastosowano ziele szałwii (surowe, modyfikowane i ekstrakt polifenolowy) w ilości 5 i 10% mas. Zbadano właściwości fizykochemiczne, mechaniczne i biologiczne. Wykazano korzystny wpływ modyfikacji szałwii na badane właściwości.

Słowa kluczowe

polydimethylsiloxane antimicrobial activity wound dressing salvia polyphenols

polidimetylosiloksan działanie przeciwbakteryjne opatrunki na rany szałwia polifenole

Wydawca

Sieć Badawcza Łukasiewicz – Instytut Chemii Przemysłowej

Czasopismo

Polimery

Rocznik

2024

Tom

Vol. 69, nr 1

Strony

33--43

Opis fizyczny

Bibliogr. 37 poz., rys., tab., wykr.

Twórcy

autor

Sarraj Sara

sara.sarraj@polsl.pl

Silesian University of Technology, Faculty of Mechanical Engineering, Department of Theoretical and Applied Mechanics, Konarskiego 18A, 44-100 Gliwice, Poland

https://orcid.org/0000-0002-1691-884X

autor

Szymiczek Małgorzata

Silesian University of Technology, Faculty of Mechanical Engineering, Department of Theoretical and Applied Mechanics, Konarskiego 18A, 44-100 Gliwice, Poland

https://orcid.org/0000-0001-5574-6545

autor

Jędrejek Dariusz

Institute of Soil Science and Plant Cultivation-State Research Institute, Department of Biochemistry and Crop Quality, Czartoryskich 8, 24-100 Puławy, Poland

https://orcid.org/0000-0001-5585-9697

autor

Soluch Agata

Institute of Soil Science and Plant Cultivation-State Research Institute, Department of Biochemistry and Crop Quality, Czartoryskich 8, 24-100 Puławy, Poland

https://orcid.org/0000-0001-6355-1414

autor

Kurpanik Roksana

AGH University of Kraków, Faculty of Materials Science and Ceramics, Department of Biomaterials and Composites, Mickiewicza 30, 30-059 Kraków, Poland

https://orcid.org/0000-0002-7943-7509

Bibliografia

[1] Borda L.J., Macquhae F.E., Kirsner R.S.: Current Dermatology Reports 2016, 5, 287. https://doi.org/10.1007/s13671-016-0162-5
[2] Ranjan A., Shaik S., Nandanwar N. et al.: mBio 2017, 8(4). https://doi.org/10.1128/mbio.01070-17
[3] Dhivya S., Padma V.V., Santhini E.: Biomedicine 2015, 5, 22. https://doi.org/10.7603/s40681-015-0022-9
[4] Victor A, Ribeiro J., Araújo F.: Journal of Mechanical Engineering and Biomechanics 2019, 4(1), 1. https://doi.org/10.24243/JMEB/4.1.163
[5] Curtis J., Colas A.: „Medical Applications of Silicones“ in “Biomaterials Science: An Introduction to Materials“ (Eds. Ratner B., Hoffman A., Schoen F. et al.) Academic, Waltham 2013, p. 1106.
[6] Shi G., Wang Y., Derakhshanfar S. et al.: Materials Science and Engineering: C 2019, 100, 915. https://doi.org/10.1016/j.msec.2019.03.058
[7] Li F., Han X., Cao D. et al.: Frontiers of Material Science 2023 17, 230641. https://doi.org/10.1007/s11706-023-0641-0
[8] Wang T., Lu Z., Wang X. et al.: Applied Surface Science 2021, 550, 149286. https://doi.org/10.1016/j.apsusc.2021.149286
[9] Bovis M., Noimark S., Woodhams J. et al.: RSC Advances 2015, 5, 54830. https://doi.org/10.1039/C5RA09045H
[10] Meran Z., Besinis A., De Peralta T. et al.: Journal of Biomedical Research Part B: Applied Biomaterials 2018, 106(3), 1038. https://doi.org/10.1002/jbm.b.33917
[11] Zong Y., Gui D., Li Si. et al.: 16th International Conference on Electronic Packaging Technology (ICEPT) 2015, 30. https://doi.org/10.1109/icept.2015.7236538
[12] Fang L., Chen H.: Polymer-Plastics Technology and Engineering 2017, 56(18), 1969. https://doi.org/10.1080/03602559.2017.1298796
[13] Montemezzo M., Ferrari M.D., Kerstner E. et al.: Journal of Biomaterials Applications 2021, 36(2), 252. https://doi.org/10.1177/08853282211011921
[14] Jiao J., Sun L., Guo Z. et al.: Scentific Reports 2016, 6, 38973. https://doi.org/10.1038/srep38973
[15] Muangman P., Aramwit P., Palapinyo S. et al.: African Journal of Pharmacy and Pharmacology 2011, 5(3), 442. https://doi.org/10.5897/AJPP10.282
[16] Surakunprapha P., Winaikosol K., Chowchuen B. et al: Journal of Wound Care 2020, 29, 36. https://doi.org/10.12968/jowc.2020.29.Sup4.S36
[17] Daniel Carrizo D., Giuseppe Gullo G., Osvaldo Bosetti O. et al.: Food Additives and Contaminants: Part A 2014, 31(3), 364. https://doi.org/10.1080/19440049.2013.869361
[18] Sarraj S., Szymiczek M., Jurczyk S.: Polymers 2023, 15(1), 42. https://doi.org/10.3390/polym15010042
[19] Zayed S., Alshimy A., Fahmy A.E.: International Journal of Biomaterials 2014, Article ID 750398. https://doi.org/10.1155/2014/750398
[20] Ahmed A., Ali M.: Journal of Research in Medical and Dental Science 2021, 9(12), 59.
[21] Moş I., Micle O., Zdrâncă M. et al.: Farmacia 2010, 58(5), 637.
[22] Tsige Y., Tadesse S., Eyesus T.G. et al.: Journal of Pathogens 2020, Article ID 3168325. https://doi.org/10.1155/2020/3168325
[23] Roy S., Santra S., Das A. et al.: Annals of surgery 2020, 271(6), 1174. https://doi.org/10.1097/SLA.0000000000003053
[24] Serrano C.A., Villena G.K., Rodriguez E.F. et al.: Scientific Reports 2023, 13, 10714. https://doi.org/10.1038/s41598-023-37830-6
[25] Chen H., Zhang Q., Wang X. et al.: Phytochemical Analysis 2010, 22(3), 247. https://doi.org/10.1002/pca.1272
[26] Sharma Y., Velamuri R., Fagan J. et al.: Pharmacognosy Research 2020, 12(2), 149. https://doi.org/10.4103/pr.pr_92_19
[27] Koutsoulas A., Carnecka M., Slanina J. et al.: Molecules 2019, 24(16), 2921. https://doi.org/10.3390/molecules24162921
[28] Liu C., Du L., Zhang S. et al.: Frontiers in Pharmacology 2023, 14, 1108518. https://doi.org/10.3389/fphar.2023.1108518
[29] Velamuri R., Sharma Y., Fagan J. et al.: Planta Medica International Open 2020, 7, e133–e144. https://doi.org/10.1055/a-1272-2903
[30] Karolak I., Krzeminska M., Kiss A.K. et al.: Metabolites 2020, 10(12), 497. https://doi.org/10.3390/metabo10120497
[31] Mehmood S., Riaz N., Nawaz S.A. et al.: Archives of Pharmacal Research 2006, 29, 195. https://doi.org/10.1007/BF02969392
[32] Sadowska U., Kopeć A., Kourimska L. et al.: Journal of Food Processing and Preservation 2017, 41(6), e13286. https://doi.org/10.1111/jfpp.13286
[33] Lee E., Zhang H., Jackson J. et al.: RSC Advanced 2016, 83, 79900. https://doi.org/10.1039/C6RA16232K
[34] Qian W., Hu X., He W. et al.: Colloids and Surfaces B: Biointerfaces 2018, 166, 61. https://doi.org/10.1016/j.colsurfb.2018.03.008
[35] Wang H., Duan W., Ren Z.: Advanced Healthcare Materials 2023, 12(8), 2202685. https://doi.org/10.1002/adhm.202202685
[36] Liu B., Furevi A., Perepelov A. et al.: FEMS Microbiology Reviews 2020, 44(6), 655. https://doi.org/10.1093/femsre/fuz028
[37] Hitl M., Kladar N., Gavarić N. et al.: Planta Medica 2021, 87(4), 273. https://doi.org/10.1055/a-1301-8648

Typ dokumentu

Bibliografia

Identyfikator YADDA

bwmeta1.element.baztech-7c2fe078-3fca-44f1-84eb-473e6f4ca6c4