Sustainable use of Natural Resources as Alternative for the Hazardous Corrosion Inhibitor of Mild Steel/Dilute Sulfuric Acid Interface: Weight Loss, EIS, AFM and FTIR Studies

• Autorzy: Tezeghdenti M. , Etteyeb N. , Dhouibi L. , Kanoun O.

Identyfikatory

DOI

10.24425/122396

• Języki publikacji: EN

Abstrakty

EN

Point of present exploration was to figure out the anticorrosion activity of Acacia Cyanophylla (Saligna leaves) extract on the corrosion of mild steel in dilute sulfuric acid medium, using weight loss measurements and electrochemical impedance spectroscopy. The result of the study revealed that the extract act as a potent inhibitor on mild steel in acid medium. The increase in inhibitor concentration and immersion time showed a positive effect on inhibition efficiency. EIS exhibited one capacitive loop which indicates that the corrosion reaction is controlled by charge transfer process. The increase of phase shift (n) in presence of (ACLE) lower surface roughness. This change reveals the adsorption of the inhibitor compound on the steel surface. According to the results of weight loss measurements, the adsorption of the extract on the steel surface can be described by the Langmuir isotherm. The inhibition mechanism of (ACLE) molecules involves physical interaction between the inhibitor and metal surface. Additionally, Protective film formation against acid attack was confirmed by FT-IR and AFM techniques.

Słowa kluczowe

EN

Acacia Cyanophylla; inhibition; corrosion; mild steel; electrochemical impedance spectroscopy; adsorption; AFM

• Wydawca: Institute of Metallurgy and Materials Science of Polish Academy of Sciences ; Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences
• Czasopismo: Archives of Metallurgy and Materials
• Rocznik: 2018
• Tom: Vol. 63, iss. 2
• Strony: 697--707
• Opis fizyczny: Bibliogr. 82 poz., rys., tab., wzory

Twórcy

autor

Tezeghdenti M.

• Technische Universitat Chemnitz, Chair for Measurement and Sensor Technology, Reichenhainer Strasse 70, 09126 Chemnitz, Germany
• Univ. Tunis El Manar, U. R. Mecanical-Energetic National School of Engineers of Tunis, B. P. 37, Le Belvédère 1002, Tunis, Tunisia

autor

Etteyeb N.

• Univ. Tunis El Manar, U. R .Mecanical-Energetic National School of Engineers of Tunis, B. P. 37, Le Belvédère 1002, Tunis, Tunisia
• Higher Institute of Applied Biology of Medenine, Route El Jorf , EL FJA 4111, B. P. 522, University of Gabes, Tunisia

autor

Dhouibi L.

• Univ. Tunis El Manar, U. R. Mecanical-Energetic National School of Engineers of Tunis, B. P. 37, Le Belvédère 1002, Tunis, Tunisia

autor

Kanoun O.

• Technische Universitat Chemnitz, Chair for Measurement and Sensor Technology, Reichenhainer Strasse 70, 09126 Chemnitz, Germany

Bibliografia

• [1] K. P. Vinod, M. S. Narayanan, G. R. Thusnavis, J. Mater. Sci. 46, 5208-5215 (2011).
• [2] A. Chekioua, R. Delimi, Energy Procedia. 74, 1418-1433 (2015).
• [3] E. Kowsari, M. Payami, R. Amini, B. Ramezanzadeh, M. Javanbakht, Appl. Surf. Sci. 289, 478-486 (2014).
• [4] S. Issaadi, T. Douadi, A. Zouaoui, S. Chafaa, M. A. Khan, G. Bouet, Corros. Sci. 53, 1484-1488 (2011).
• [5] J. Aljourani , M. A. Golozar, K. Raeissi, Mater. Chem. Phys. 121, 320-325 (2010).
• [6] N. Etteyeb, X. R. Nóvoa, Corros. Sci. 112, 471-482 (2016).
• [7] N. O. Eddy, P. A. Ekwumemgbo, P. A. P. Mamza, Green Chem. Lett. Rev. 2, 223-231 (2009).
• [8] S. A. Umoren, J. Adhes. Sci. Technol. 30, 1858-1879 (2016).
• [9] Z. V. P. Murthy, K. Vijayaragavan, Green. Chem. Lett. Rev. 7, 209-219 (2014).
• [10] K. K. Anupama, K. M. Shainy, A. Joseph, J. Bio. Tribo. Coroos. 2, 2 (2016).
• [11] I. Ikeuba, B. I. Ita, P. C. Okafor, B. U. Ugi, E. B. Kporokpo, Prot. Met. Phys. Chem. Surf. 51, 1043-1049 (2015)
• [12] Y. М. Khaburs’kyi, Materials Science. 51, 131-137 (2015).
• [13] P. Slepski, H. Gerengi, A. Jazdzewska, J. Orlikowski, K. Darowicki, Constr. Build. Mater. 52, 482-487 (2014).
• [14] E. E. Ebenso, H. Alemu, S. A. Umoren, I. B. Obot, Int. J. Electrochem. Sci. 3, 1325-1339 (2008).
• [15] E. E. Ebenso, E. E. Oguzie, Mater. Lett. 59, 2163-2165 (2005).
• [16] G. H. Booth, S. J. Mercer, Corros. Sci. 4, 425 (1964).
• [17] A. A. Rahim, E. Rocca, J. Steinmetz, M. J. Kassim, R. Adnan, M. S. Ibrahim, Corros. Sci. 49, 402-417 (2007).
• [18] M. Oki, E. Charles, C. Alaka, T. K. Oki, Mater. Sci. Appl. 02, 592-595 (2011).
• [19] H. Gerengi, A. Jazdzewska, M. Kurtay, J. Adhes. Sci. Technol. 29, 36-48 (2015).
• [20] N. A. A. Talib, S. Zakaria, C. C. Hua, N. K. Othman, AIP Conf. Proc. 1614, 171-177 (2014).
• [21] R. T. Lange, J. Microbiol. Serol. 25, 272 (1959).
• [22] J. Clark-Lewis, I. Dainis, Aust. J. Chem. 20, 2191-2198 (1967)
• [23] World Bank, A Strategy for the Development a course in arid and Semi Arid area, Annex III Technical Report, 1995, 162,Tunisia.
• [24] N. Lassoued, M. Rekik, H. Ben Salem, M. A. Dargouth, Livest. Sci. 105, 129-136 (2006).
• [25] S. A. Sotohy, A. N. Sayed, M. M. Ahmed, DTW. Dtsch. Tierztl. Wochenschr. 104, 432 (1997).
• [26] A. A. Dafallah, Z. Al-Mustafa, Am. J. Chin. Med. 24, 263 (1996).
• [27] G. Avci, Y. KeleŞ, Surf. Interface Anal. 43, 1311-1317 (2011).
• [28] N. M. Gumgumjee, A. S. Hajar, Int. J. Microbiol. Immunol. Res. 3, 51-57 (2015).
• [29] Paris, R. R. Bull. Sot C&mBbi. 35, 655 (1953).
• [30] H. I. El Sissi, A. E. El Sherbeiny, Qual. Plant. Mater. Veg. 14, 257 (1967).
• [31] E. Haslam, J. Nat. Prod. 59, 205-215 (1996).
• [32] M. Tezeghdenti, N. Etteyeb, L. Dhouibi, O. Kanoun, A. Al-Hamri, Protection of Metals and Physical Chemistry of Surfaces. 53, 753-764 (2017).
• [33] H. Ashassi-Sorkhabi, M. R. Majidi, K. Seyyedi, Appl. Surf. Sci. 225, 176 (2004).
• [34] S. D. Deng, X. H. Li, H. Fu, Corros. Sci. 53, 760-768 (2011).
• [35] N. O. Obi-Egbedi, I. B. Obot, Arab. J. Chem. 6, 211-223 (2013).
• [36] M. Prajila, A. Joseph, J. Bio, Tribo, Corros. 3, 10 (2017).
• [37] N. I. Kairi, J. Kassim, Int. J. Electrochem. Sci. 8, 7138-7155 (2013).
• [38] A. Chattopadhyay, N. Bandyopadhyay, A. K. Das, M. K. Panigrahi, Scr. Mater. 52, 211-215 (2005).
• [39] Z. Panossian, N. L. d. Almeida, R. M. F. d. Sousa, G. d. S. Pimenta, L. B. S. Marques, Corros. Sci. 58, 1-11 (2012).
• [40] N. Raghavendra, J. Ishwara Bhat, J. Bio. Tribo. Corros. 4, 2 (2018).
• [41] A. K. Singh, M. Quraishi, J. Appl. Electrochem. 40, 1293-1306 (2010).
• [42] A. Spinelli, R. S. Gonçalves, Corros. Sci. 30, 1235-1246 (1990).
• [43] M. A. Quraishi, D. Jamal, Anti. Corros. Method. M. 47, 233-240 (2000).
• [44] S. K. Shukla, M. A. Quraishi, Corros. Sci. 52, 314-321 (2010).
• [45] E. E. Oguzie, Y. Li, F. H. Wang, Electrochim. Acta. 53, 909-914 (2007).
• [46] N. D. Gowraraju, S. Jagadeesan, K. Ayyasamy, L. O. Olasunkanmi, E. E. Ebenso, S. Chitra , J. Mol. Liq. 232, 9-19 (2017).
• [47] S. D. Deng, X. H. Li, Corros. Sci. 55, 407-415 (2012).
• [48] A. Rodríguez-Torres, O. Olivares-Xometl, M. G. Valladares-Cisneros, J. G. González-Rodríguez, Int. J. Electrochem. Sci. 13, 3023-3049 (2018).
• [49] M. Chevalier, F. Robert, N. Amusant, M. Traisnel, C. Roos, M. Lebrini, Electrochim. Acta. 131, 96-105 (2014).
• [50] A. K. Singh, E. E. Ebenso, Res. Chem. Intermed. 39, 1823-1831 (2013).
• [51] M. H. Hussin, M. J. Kassim, Mater. Chem. Phys. 125, 461-468 (2011).
• [52] S. A. Umoren, I. B. Obot, Z. Gasem, N. A. Odewunmi, J. Dispers. Sci. Technol. 36, 789-802 (2014).
• [53] S. S. Abd El-Rehim, M. M. Deyab, H. H. Hassan, A. A. Ibrahim, Z. Phys. Chem. 230, 1641-1653 (2016).
• [54] J. O. L. Riggs, Second ed. C. C, (1973) Nathan, Houston TX.
• [55] J. J. DiStefano, A. R. Stubberud, I. J. Williams, Theory and Problems of Feedback and Control Systems: 2nd. ed., Schaum’s Outline Series, 1990 McGraw-Hill, New York.
• [56] C. B. Verma, M. A. Quraishi, E. E. Ebenso, Int. J. Electrochem. Sci. 8, 12894-12906 (2013).
• [57] D. K. Yadav, D. S. Chauhan, I. Ahamad, M. A. Quraishi, RSC Advances 3, 632 (2013).
• [58] S. A. Umoren, E. E. Ebenso, Mater. Chem.Phys. 106, 387-393 (2007).
• [59] N. Goudarzi, M. Peikari, M. R. Zahiri, H. R. Mousavi, Arch. Metall. Mater. 57, 845-851 (2012).
• [60] P. Muthukrishnan, B. Jeyaprabha, P. Prakash, Acta Metall. Sin. 26, 416-424 (2013).
• [61] S. A. Umoren, I. B. Obot, E. E. Ebenso, P. C. Okafor, O. Ogbobe, E. E. Oguzie, Anti-Corros. Met. Mater. 53, 277-282 (2006).
• [62] A. S. Fouda, K. Shalabi, A. E-Hossiany, J. Bio. Tribo. Corros. 2, 18 (2016).
• [63] X. H. Li, S. D. Deng, H. Fu, Corros. Sci. 62, 163-175 (2012).
• [64] H. Cangl, Z. Fei, H. Xiao, J. Huang, Q. Xu, Int. J. Electrochem. Sci. 7, 8869-8882 (2012).
• [65] X. H. Li, S. D. Deng, H. Fu, J. Appl. Electrochem. 40, 1641-1649 (2010).
• [66] Q. Qu, S. A. Jiang, W. Bai, L. Li, Electrochim. Acta. 52, 6811(2007).
• [67] M. Gojic, L. Kosec, J. Iron Steel Inst. Int. 37, 685-690 (1997).
• [68] C. Fiaud, A. Harch, D. Mallouh, M. Tzinmann, Corros. Sci. 35, 1437-1444 (1993).
• [69] K. Chennappan, G. S. Mathur Gopalakrishnan, Ind. Eng. Chem. Res. 51, 10399-10407 (2012).
• [70] S. Perumal, S. Muthumanickam, A. Elangovan, R. Karthik, R. Sayee kannan, K. K. Mothila, J. Bio. Tribo. Corros. 3, 13 (2017)
• [71] M. Tezeghdenti, L. Dhouibi, N. Etteyeb, J. Bio. Tribo. Corros. 1, 16 (2015).
• [72] F. Bentiss, M. Traisnel, M. Lagrenee, Corros. Sci. 42, 127-146 (2000).
• [73] R. Solmaz, M. E. Mert, G. Kardaş, B. Yazici, M. Erbıl, Acta Phys-Chim. Sin. 24, 1185-1191 (2008).
• [74] A. K. Singh, V. K. Singh, M. A. Quraishi, Int. J. Corros. 2010 (2010).
• [75] L. Elkadi, B. Mernari, M. Traisnel, F. Bentiss, M. Lagreneée, Corros. Sci. 42, 703-719 (2000).
• [76] D. W. Potter, T. B. Tran, Toxicol. Lett. 62, 275-285 (1992).
• [77] ASTM Standards, Corrosion of Metals: Wear and Erosion, 1995, USA.
• [78] A. Frignani, C. Monticelli, F. Zucchi , G. Trabanelli, Int. J. Corros. Scale Inhib. 3, 105-119 (2014).
• [79] Y. G. Avdeev, Y. I. Kuznetsov, Russ. Chem. Rev. 81, 1133 (2012).
• [80] F. Yousif, M. S. Hifnawy, G. Soliman, L. Boulos, T. Labib, S. Mahmoud, F. Ramzy, M. Yousif, I. Hassan, K. Mahmoud, S. M. El-Hallouty, M. El-Gendy, L. Gohar, M. El-Manawaty, W. Fayyad, B. S. El-Menshawi, Pharm. Biol. 45, 501-510 (2008).
• [81] S. H. Zaferani, M. Sharifi, D. Zaarei, M. R. Shishesaz, J. Environ. Chem. Eng. 1, 652-657 (2013).
• [82] N. I. Podobaev, Y. G. Avdeev, Prot. Met. 40, 7-13 (2004).

Uwagi

Opracowanie rekordu w ramach umowy 509/P-DUN/2018 ze środków MNiSW przeznaczonych na działalność upowszechniającą naukę (2018).