PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Influence of the impulse voltage on the residual charge

Wybrane pełne teksty z tego czasopisma
Identyfikatory
Warianty tytułu
PL
Wpływ napięcia udarowego na ładunek resztkowy
Języki publikacji
EN
Abstrakty
EN
Results of measurements and simulations of the charge accumulated on the surface of composite insulator models after applying to them standard high voltage impulse (1.2/50 – positive polarity) are presented in the paper. Studies have shown that the residual charge deposited after applying the impulse with a positive polarity does not exceed 8nC and should not noticeably affect the flashover voltage tested models.
PL
W artykule przedstawiono wyniki badań ładunku zgromadzonego na powierzchni modelu izolatora kompozytowego po przyłożeniu do jednego z okuć standardowego udaru wysokonapięciowego (1.2/50) o biegunowości dodatniej. Badania wykazały, że wprowadzony w ten sposób ładunek resztkowy nie przekracza 8nC i nie powinien wpływać w zauważalny sposób na wartość napięcia przeskoku badanych modeli.
Rocznik
Strony
126--129
Opis fizyczny
Bibliogr. 13 poz., rys., wykr.
Twórcy
autor
  • Politechnika Wrocławska, Katedra Podstaw Elektrotechniki i Elektrotechnologii, ul. Wybrzeże Wyspiańskiego 27, 50-370 Wrocław
autor
  • Politechnika Wrocławska, Katedra Podstaw Elektrotechniki i Elektrotechnologii, ul. Wybrzeże Wyspiańskiego 27, 50-370 Wrocław
Bibliografia
  • [1] Atrom U., Lescale V., Verification of equipment for 800 kV HVDC, International Workshop for Ultra High Voltage (UHV) Transmission Systems, Beijing, China, Nov. 2006, 28 – 29
  • [2] Bahrman M.P., Johnson B.K., The ABCs of HVDC transmission technologies, IEEE Power Energy Mag., vol. 5 (2007), no. 2, Mar./Apr., 32 – 44
  • [3] Meah Kala, Ula Sadrul, Comparative evaluation of HVDC and HVAC transmission systems, Power Engineering Society General Meeting, IEEE, (2007), 1 – 5
  • [4] Sarath Kumara et al., DC flashover characteristics of a polymeric insulator in presence of surface charges, IEEE Transactions on Dielectrics and Electrical Insulation, vol. 19 (2012) no. 3, 1084-1090
  • [5] Shahid Alam, Imtiaz Rifanul Hoque, Effect of Surface Charging on DC Flashover Characteristics of Polymeric Insulators, Diploma Work No. 73/2011; Chalmers University of Technology; Göteborg; Sweden 2011
  • [6] Tenbohlen S., Schroder G., The influence of surface charge on lightning impulse breakdown of spacers in SF 6, IEEE Transactions on Dielectrics and Electrical Insulation, vol. 7 (2000), no. 2, 241 – 246
  • [7] Farish O., AI-Bawy I., Effect of Surface Charge on Impulse Flashover of Insulators in SF6, IEEE Transactions on Electrical Insulation, vol. 26 (1991), no. 3, 443-452
  • [8] Deng J., Matsuoka S, Kumada A., Hidaka K, Residual Charge Density Distribution Measurement of Surface Discharge on Cylindrical Insulator, Proceedings of International Conference on Electrical Engineering, Shenyan, China, pp. 1-5, ICEE 2009
  • [9] Faircloth D. C., Surface Charge Density and its Influence on Insulator Flashover, PHD thesis, University of Manchester Institute of Science and Technology, 2000.
  • [10] Deng J., Matsuoka S, Kumada A., Hidaka K, The influence of residual charge on surface discharge propagation, J. Phys. D: Appl. Phys., vol. 43 (2010) no. 49, 2010.
  • [11] Kacprzyk R., Pelesz A., Zanik ładunku na izolatorach kompozytowych, Przegląd Elektrotechniczny, 90 (2014), no. 10, 16-18
  • [12] Faircloth D.C., Allen N. L., High resolution measurements of surface charge densities on insulator surfaces", IEEE Transactions on Dielectrics and Electrical Insulation, vol. 10, (2003) no.2285-290
  • [13] Pelesz Adam, Wpływ ładunku elektrycznego zgromadzonego na modelu izolatora na napięcie przeskoku, Rozprawa doktorska, Politechnika Wrocławska, Wrocław 2016
Uwagi
Opracowanie ze środków MNiSW w ramach umowy 812/P-DUN/2016 na działalność upowszechniającą naukę.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-7bd82247-3f3e-4896-9ddc-7e76183316e1
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.