Polymer injection molding: advanced simulations or tablet computations

• Autorzy: Narowski P. , Wilczyński K.

Identyfikatory

DOI

10.5604/01.3001.0010.8782

• Języki publikacji: EN

Abstrakty

EN

Simulation of injection molding of polymeric materials is a common way of solving issues in plastic part and injection mold design. CAE software is getting more available and user-friendly, which sometimes leads to unreasonable use cases of these programs. The original, relatively simple tool has been introduced to validate runner systems in injection molds. It allows a fast identification of the most important design parameters of runner system. This tool does not require any support of FEM simulations, but results obtained from it have been successfully compared with injection molding simulations.

Słowa kluczowe

EN

Injection Molding; Polymer Rheology; FEM simulation

PL

formowanie wtryskowe; reologia polimerów; symulacje FEM

• Wydawca: Foundation for Young Scientists
• Czasopismo: Challenges of Modern Technology
• Rocznik: 2016
• Tom: Vol. 7, no. 4
• Strony: 3--5
• Opis fizyczny: Bibliogr. 6 poz., rys.

Twórcy

autor

Narowski P.

• Warsaw University of Technology Faculty of Production Engineering, Polymer Processing Department Polymer Processing Department, Narbutta 85, 02-524 Warsaw, Poland

autor

Wilczyński K.

• Warsaw University of Technology Faculty of Production Engineering Polymer Processing Department, Narbutta 85, 02-524 Warsaw, Poland

Bibliografia

• 1. Wilczyński K.: Cadmould-3D System for Computer Modeling of Injection Molding of Polymeric Materials (in Polish), Polimery 1999, p.407.
• 2. Wilczyński K., Wilczyński K.J., Narowski P.: Badania symulacyjno – doświadczalne nierównomiernego wypełniania form wtryskowych zrównoważonych geometrycznie, Polimery 2015, p.411.
• 3. Wilczyński K.: Reologia w przetwórstwie tworzyw sztucznych, Warszawa, WNT 2001.
• 4. Vlachopoulos J.: Fundamentals of Fluid Mechanics, Hamilton, Mc Master University 2014.
• 5. Osswald T., Rudolph N.: Polymer Rheology. Fundamentals andApplications, Munich, Hanser Publishers 2015.
• 6. Osswald T.A., Turng L-S, Gramann P.: Injection Molding Handbook,Hanser, Munich 2008.