PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Obróbka cieplna wysokowytrzymałych stali konstrukcyjnych z wykorzystaniem przemiany izotermicznej poniżej temperatury Ms

Treść / Zawartość
Identyfikatory
Warianty tytułu
EN
Heat treatment of high-strength structural steels employing isothermal transformation below Ms temperature
Języki publikacji
PL
Abstrakty
PL
W artykule przedstawiono wyniki wstępnych badań wpływu izotermicznej obróbki cieplnej poniżej temperatury Ms na właściwości mechaniczne wysokowytrzymałych stali konstrukcyjnych. Badania wykonano na dwóch gatunkach stali nanobainitycznych oraz na wytwarzanym przemysłowo standardowym gatunku stali niskostopowej do ulepszania cieplnego. Stwierdzono, że włączenie do obróbki cieplnej stali nanobainitycznych przemiany izotermicznej poniżej Ms, podwyższa wytrzymałość i jednocześnie zwiększa ciągliwość, a także może zostać wykorzystane do regulowania proporcji Rp0,2 : Rm. W przypadku stali niskostopowej do ulepszania cieplnego, obróbka polegająca na ochłodzeniu do temperatury poniżej Ms i na przeprowadzeniu przemiany izotermicznej w tej temperaturze, spowodowała wytworzenie mikrostruktury wielofazowej o bardzo korzystnym połączeniu właściwości wytrzymałościowych i plastycznych. W celu opisu typu i morfologii składników fazowych powstałych w wyniku przemian izotermicznych zachodzących w badanych stalach poniżej temperatury Ms wymagane jest kontynuowanie pracy z zastosowaniem zaawansowanych metod badań dylatometrycznych i mikrostrukturalnych.
EN
Results of preliminary research work on the effect of isothermal heat treatment below Ms temperature on mechanical properties of high-strength structural steels are reported in the paper. Two grades of nanobainitic steels and a commercial quenching and tempering low-alloy steel were used in the investigation. It was found that incorporation of an isothermal transformation below Ms into heat treatment of nanobainitic steels increased strength and also increased ductility, and furthermore it could be used for adjusting the Rp0,2 : Rm proportion. Heat treatment of the commercial low-alloy steel comprising cooling to temperature below Ms and isothermal treatment at that temperature produced multi-phase microstructure characterised with a very attractive combination of strength and ductility. To characterise the type and morphology of phase constituents formed as a result of isothermal transformations below Ms temperature a continuation of the research work using advanced dilatometric and microstructural research methodologies are needed.
Rocznik
Strony
2--10
Opis fizyczny
Bibliogr. 19 poz., rys., tab., wykr.
Twórcy
autor
  • Instytut Metalurgii Żelaza im. St. Staszica
autor
  • Instytut Metalurgii Żelaza im. St. Staszica
autor
  • Instytut Metalurgii Żelaza im. St. Staszica
Bibliografia
  • [1] D.V. Edmonds, K. He, F.C. Rizzo, B.C. De Cooman, D.K. Matlock, J.G. Speer, Quenching and partitioning martensite – A novel steel heat treatment, Mater. Sci. Eng. 438-440 (2006) 25-34.
  • [2] D.V. Edmonds, J.G. Speer, Martensitic steels with carbide free microstructures containing retained austenite, Mater. Sc. Technol. 26 (2010) 386-391.
  • [3] H.Y. Li, X. W. Lu, W.J. Li, X.J. Jin, Microstructure and Mechanical Properties of an Ultrahigh-Strength 40SiMnNiCr steel during the One-Step Quenching and Partitioning Process, Metall. Mater. Trans. 41 (5) (2010) 1284-1300.
  • [4] M.J. Santofimia, S.M.C. van Bohemen, J. Sietsma, Combining bainite and martensite in steel microstructures for light weight applications, The Journal of The southern African Institute of Mining and Metallurgy 113 (2) (2013) 143-148.
  • [5] E.P. Da Silva, D. De Knijf, W. Xu, C. Föjer, Y. Houbaert, J. Sietsma, R. Petrov, Isothermal transformations in advanced high strength steels below martensite start temperature,Mater. Sci. Technol. 31 (7) (2015) 808-816.
  • [6] B. Garbarz, B. Niżnik-Harańczyk, Modification of microstructureto increase impact toughness of nanostructured bainiteaustenite steel, Mater. Sci. Technol. 31 (5) (2014) 773-780.10 Prace Instytutu Metalurgii Żelaza 69 (2) (2017) 2–10.
  • [7] B. Garbarz, W. Zalecki, Kinetyka izotermicznych przemian fazowych w stalach wysokowęglowych poniżej temperatury Ms, Prace Instytutu Metalurgii Żelaza 69 (1) (2017) 2-9.
  • [8] A. Navarro-Lopez, J. Sietsma, M.J. Santofimia, Effect of Prior Athermal Martensite on the Isothermal Transformation Kinetics Below Ms in a Low-C High-Si Steel, Metall. Mater. Trans. A 47 (3) (2016) 1028-1039.
  • [9] S.M.C. Van Boheman, M. J. Santofimia, J. Sietsma, Experimental evidence for bainite formation below Ms in Fe-0.66C, Scripta Mater. 58 (6) (2008) 488-491.
  • [10] P. Kolmskog, A. Borgenstam, M. Hillert, P. Hedström, S.S. Babu, H. Terasaki, Y.I. Komizo, Direct Observation that Bainite can Grow Below Ms. Metall. Mater. Trans. A 43 (3) (2012) 4984-4988.
  • [11] D. Kim, S.J. Lee, B.C. De Cooman, Microstructure of Low C Steel Isothermally Transformed in the Ms to Mf Temperature Range, Metall. Mater. Trans. A 43 (13) (2012) 4967-4983.
  • [12] B. Garbarz, W. Burian, Microstructure and Properties of Nanoduplex Bainite-Austenite Steel for Ultra-High-Strength Plates, Steel Research Int. 85 (12) (2014) 1620-1628.
  • [13] B. Garbarz, Perspektywy rozwoju technologii wytwarzania i zastosowań wyrobów z ultrawytrzymałych stali nanobainitycznych, Prace Instytutu Metalurgii Żelaza 67 (2) (2015) 65-79.
  • [14] Instytut Metalurgii Żelaza im. St. Staszica, Walcarka do walcowania na gorąco wraz z urządzeniami do obróbki cieplno plastycznej (moduł B-LPS), www.imz.pl, (dostęp 20.03.17).
  • [15] Stahl-Eisen-Prüfblatt. 1681, “Guidelines for preparation, execution and evaluation of dilatometric transformation test on iron alloys”. STAHL-EISEN-Prüfblätter (SEP) des Vereins Deutscher Eisenhüttenleute, 2nd edition, 1998.
  • [16] Standard Practice for Quantitative Measurement and Reporting of Hypoeutectoid Carbon and Low-Alloy Steel Phase Transformations”. ASTM Committee A01 on Steel, Stainless Steel and Related Alloys, 2000.
  • [17] Procedura 2-BT, Badania dylatometryczne przemian fazowych materiałów metalicznych, Instytut Metalurgii Żelaza im. Stanisława Staszica, wyd. III, 2005.
  • [18] B. Garbarz, B. Niżnik, W. Zalecki, Opracowanie podstaw technologii obróbki cieplnej ultrawytrzymałej stali konstrukcyjnej w celu wytworzenia trójfazowej struktury nanokompozytowej o zwiększonej odporności na pękanie w stosunku do poziomu osiąganego obecnie”. Sprawozdanie IMŻ nr S0 0835, 201.
  • [19] PN-EN ISO 6892-1, Metale. Próba rozciągania – Część 1: Metoda badania w temperaturze pokojowej, 2016
Uwagi
Opracowanie rekordu w ramach umowy 509/P-DUN/2018 ze środków MNiSW przeznaczonych na działalność upowszechniającą naukę (2018)
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-7b58a6b8-fe9b-40cb-9bc2-3d4c27a6ccd3
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.