Joining Of Green Body And Dense Substrate For Indium Tin Oxide Under Uniaxial Pressure In An Open Condition

• Autorzy: Moon G.-S. , Chung T.-J. , Yang S. H. , Hong G.-S. , Oh K.-S.

Identyfikatory

DOI

10.1515/amm-2015-0099

Warianty tytułu

PL

Łączenie zielonej masy i gęstego podłoża z tlenku cyny indu w warunkach jednoosiowego ściskania w stanie otwartym

• Języki publikacji: EN

Abstrakty

EN

The green body and dense substrate of indium tin oxide was joined by uniaxially pressing at 0.3 MPa at 1300°C to test the restoring of the eroded part of transparent conducting oxide target. The green body was sintered to 98% of theoretical density under the suppression of shrinkage along the boundary below 5%. The boundary between two parts was free of pore but could be recognized from the difference in grain sizes. The joined part had the virtually same density with the substrate, but the grain size was less than one fifth compared with that of substrate.

Słowa kluczowe

EN

transparent conducting oxide; indium tin oxide; green body; joining

PL

tlenek indu; zielona masa; łączenie

• Wydawca: Institute of Metallurgy and Materials Science of Polish Academy of Sciences ; Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences
• Czasopismo: Archives of Metallurgy and Materials
• Rocznik: 2015
• Tom: Vol. 60, iss. 2B
• Strony: 1209--1212
• Opis fizyczny: Bibliogr. 12 poz., rys., tab.

Twórcy

autor

Moon G.-S.

• School of Materials Science and Engineering, Andong National University, Andong, Republic of Korea

autor

Chung T.-J.

• School of Materials Science and Engineering, Andong National University, Andong, Republic of Korea

autor

Yang S. H.

• Heesung Metal Ltd., Incheon, Republic of Korea

autor

Hong G.-S.

• Heesung Metal Ltd., Incheon, Republic of Korea

autor

Oh K.-S.

• School of Materials Science and Engineering, Andong National University, Andong, Republic of Korea

Bibliografia

• [1] D. W. Kim, Y. H. Kim, J. H. Kim, D. G. Kim, J. H. Lee, K. B. Choi, H. T. Son, J. Kor. Powd. Met. Inst. 19, 264 (2012).
• [2] J. G. Kim, J. Kor. Powd. Met. Inst. 19, 72 (2012).
• [3] T. Kato, S. Igarashi, Y. Ishiwatari, M. Furukawa, H. Yamaguchi, Hydrometallurgy 137, 148 (2013).
• [4] Y. He, E. Ma, Z. Xu, J. Hazard. Mater. 263[2], 610 (2013).
• [5] G. Dodbiba, H. Nagai, L. P. Wang, K. Okaya, T. Fujita, Waste Manage. 32, 1937 (2012).
• [6] J. Yang, T. Retegan, C. Ekberg, Hydrometallurgy 137, 68 (2013).
• [7] T. Fukami, F. Shintani, M. Naoe, Thin Solid Films 151, 373 (1987).
• [8] R. K. Bordia, A. Jagota, J. Am. Ceram. Soc. 76, 2475 (1993).
• [9] A. Roosen, J. Eur. Ceram. Soc. 21, 1993 (2001).
• [10] J. Gurauskis, A. J. Sánchez-Herencia, C. Baudín, J. Eur. Ceram. Soc. 25, 3403 (2005).
• [11] J. H. Han, Ceram. Int. 39, 239 (2013).
• [12] B. L. Gehman, S. Jonsson, T. Rudolph, M. Scherer, M. Weigert, R. Werner, Thin Solid Films 220, 336 (1992).

Uwagi

PL

Opracowanie ze środków MNiSW w ramach umowy 812/P-DUN/2016 na działalność upowszechniającą naukę.