Mechanical Behaviour of Nanostructured Bainitic Steel Under High Strain Rate Shear and Compression Loading

• Autorzy: Marcisz J. , Janiszewski J.

Identyfikatory

DOI

10.24425/amm.2019.129508

• Języki publikacji: EN

Abstrakty

EN

The article presents the results of investigation of ultra-strength nanostructured bainitic steel Fe-0.6%C-1.9%Mn-1.8%Si-1.3%Cr-0.7%Mo (in wt.%) subjected to shear and uniaxial compression under high strain rate loading. Steel of microstructure consisted of carbide-free bainite and carbon enriched retained austenite presents a perfect balance of mechanical properties especially strength to toughness ratio. Two retained austenite morphologies exist which controlled ductility of the steel: film between bainite laths and separated blocks. It is well established that the strain induced transformation of carbon enriched retained austenite to martensite takes place during deformation. Shear localisation has been found to be an important and often dominant deformation and fracture mode in high-strength steels at high strain rate. Deformation tests were carried out using Gleeble simulator and Split Hopkinson Pressure Bar. Shear and compression strength were determined and toughness and crack resistance were assessed. Susceptibility of nanostructured bainitic steel to the formation of adiabatic shear bands (ASBs) and conditions of the bands formation were analysed. The results suggest that the main mechanism of hardening and failure at the dynamic shearing is local retained austenite transformation to high-carbon martensite which preceded ASBs formation. In the area of strain localization retained austenite transformed to fresh martensite and then steel capability to deformation and strengthening decreases.

Słowa kluczowe

EN

nanostructured bainitic steel; high-strain-rate material properties; adiabatic shear bands; shear energy

• Wydawca: Institute of Metallurgy and Materials Science of Polish Academy of Sciences ; Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences
• Czasopismo: Archives of Metallurgy and Materials
• Rocznik: 2019
• Tom: Vol. 64, iss. 3
• Strony: 1151--1162
• Opis fizyczny: Bibliogr. 26 poz., fot., rys., tab., wzory

Twórcy

autor

Marcisz J.

• Łukasiewicz Research Network-Institute for Ferrous Metallurgy, 12-14 Karola Miarki Str., 44-100, Gliwice, Poland

autor

Janiszewski J.

• Military Academy of Technology, 2 Gen. Sylwestra Kaliskiego Str., 00-908 Warszawa, Poland

Bibliografia

• [1] F. G. Caballero, H.K.D.H. Bhadeshia, K.J.A. Mawella, D. G. Jones, P. Brown, Mater. Sci. Technol. 18, 279-284 (2002).
• [2] C. Garcia-Mateo, F. G. Caballero, H.K.D.H. Bhadeshia, ISIJ Int. 43, 1238-1243 (2003).
• [3] C. Garcia-Mateo, F. G. Caballero, H.K.D.H. Bhadeshia, ISIJ Int. 43, 1821-1825 (2003).
• [4] F. G. Caballero, H.K.D.H. Bhadeshia, Curr. Opin. Solid State Mater. Sci. 8, 251-257 (2004).
• [5] B. Garbarz, W. Burian, Steel Res. Int. 85 (12), 1620-1628 (2014).
• [6] B. Garbarz, B. Niżnik-Harańczyk, Mater. Sci. Technol. 31 (7), 773-780 (2015).
• [7] W. Liu, J. Qu, H. Shao, J. Mater. Proc. Technol. 69, 186-189 (1997).
• [8] C. Garcia-Mateo, F. G. Caballero, Mat. Trans. 46 (8), 1839-1846 (2005).
• [9] L. Morales-Rivas, C. Garcia-Mateo, M. Kuntz, T. Sourmail, F. G. Caballero, Mat. Sci. and Eng. A662, 169-177 (2016).
• [10] E. Kozeschnik, H.K.D.H. Bhadeshia, Mat. Sci. and Technol. 24, 343-347 (2008).
• [11] T. Sourmail, C. Garcia-Mateo, F. G. Caballero, L. Morales-Rivas, R. Rementeria, M. Kuntz, Metals 7 (1), 31-38 (2017).
• [12] L. Morales-Rivas, C. Garcia-Mateo, T. Sourmail, M. Kuntz, R. Rementeria, F. G. Caballero, Metals 6 (12), 302-322 (2016).
• [13] W. Burian, J. Marcisz, B. Garbarz, L. Starczewski, Arch. of Metall. and Mater. 59, (3), 1211-1216 (2014).
• [14] J. Marcisz, W. Burian, J. Stępień , L. Starczewski, M. Wnuk, J. Janiszewski, 28th International Symposium on Ballistics, Atlanta, USA, 1348-1361 (2014).
• [15] B. Garbarz, J. Marcisz, W. Burian, A. Wiśniewski, Problemy Techniki Uzbrojenia. Biuletyn Naukowy Wojskowego Instytutu Technicznego Uzbrojenia 118 (2), 41-49 (2011) (in polish).
• [16] J. Marcisz, B. Garbarz, W. Burian, A. Wiśniewski, 26th International Symposium on Ballistics, Miami, USA, 1595-1606 (2011).
• [17] L.C.D. Fielding, H.K.D.H. Bhadeshia, Mat. Sci. and Technol. 30, 812-817 (2014).
• [18] T. W. Wright, The physics and mathematics of adiabatic shear bands, Cambridge University Press, 2002
• [19] S. M. Walley, Metall. and Mater. Trans. A 38A, 2629-2654 (2007).
• [20] M. A. Meyers, V. F. Nesterenko, J. C. LaSalvia, Qing Xue, Mater. Sci. and Eng. A317, 204-225 (2001).
• [21] B. Avishan, A. Sefidgar, S. Yazdani, J. of Mater. Sci. 54 (4), 3455-3468 (2019).
• [22] Y. T. Tsai, C. R. Lin, W. S. Lee, C. Y. Huang, J. R. Yang, Scripta Materialia 115, 46-51 (2016).
• [23] Y.-T. Tsai, Y.-W. Chen, J.-R. Yang, Procedia Engineering 207, 1862-1867 (2017).
• [24] D.-T. Chung, S.-K. Moon, Y.-H. Yoo, Journal de Physique IV, Colloque C8, supplement au Journal de Physique III 4, 547-552, (1994).
• [25] L.C.D. Fielding, H.K.D.H. Bhadeshia, Mat. Sci. and Technol. 30, 812-817 (2014).
• [26] H. Nahme, E. Lach, Journal de Physique IV 7, 373-378 (1997).

Uwagi

EN

1. This work was financially supported by The National Centre for Research and Development (POIR-04.01.04-00-0047/16, Project "Development of production technology of light observation-protective container (LOOK) made of nanostructured ultrastrength steels”).

PL

2. Opracowanie rekordu w ramach umowy 509/P-DUN/2018 ze środków MNiSW przeznaczonych na działalność upowszechniającą naukę (2019).