PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Experimental analysis of noise and vibration of a diesel engine

Treść / Zawartość
Identyfikatory
Warianty tytułu
Języki publikacji
EN
Abstrakty
EN
Noise and vibration of ignition compression engine is one of the most complicated fields to cope with since every mechanism that compose of the engine affect them separately. In this study, effect of diesel on engine noise and vibration has been studied on an unmodified compression ignition engine. Noise and vibration characteristic of a direct ignition engine, which was fuelled with diesel, were investigated. With the usage of equations obtained from regression analysis, estimation of engine characteristic fuelled with various biodiesels researches were carried out. Tests were conducted at fixed injection timing of diesel fuel. The first system is for diesel fuel injection; the second one is PFI (port-fuelled injection) and is used for injecting alcohol into the engine intake manifold. The engine applied to this study was a naturally aspirated, 3in-line, IVECO AIFO 8031 i06.05 diesel engine with direct injection. Experiments were conducted in a sound insulated room. For each experiment, vibration data gathered from the engine block with 3.2 kHz (for vibration) for 2 s and with 20 kHz sampling frequency for 0.320 s. All measurements were performed under conditions: angle 10; 4 different loads (4, 8, 12 and 20 kW).
Twórcy
  • Vilnius Gediminas Technical University Department of Mechanical and Material Engineering J. Basanavičiaus Street 28, LT-03224 Vilnius, Lithuania
autor
  • Vilnius Gediminas Technical University Department of Mechanical and Material Engineering J. Basanavičiaus Street 28, LT-03224 Vilnius, Lithuania
  • Vilnius Gediminas Technical University Department of Mechanical and Material Engineering J. Basanavičiaus Street 28, LT-03224 Vilnius, Lithuania
autor
  • Vilnius Gediminas Technical University Department of Mechanical and Material Engineering J. Basanavičiaus Street 28, LT-03224 Vilnius, Lithuania
  • Vilnius Gediminas Technical University Department of Automobile Engineering J. Basanavičiaus Street 28, 03224 Vilnius, Lithuania
autor
  • Vilnius Gediminas Technical University Department of Automobile Engineering J. Basanavičiaus Street 28, 03224 Vilnius, Lithuania
autor
  • Budapest University of Technology and Economics Department of Energy Engineering Milegyetem rkp. 3-9, H-1111 Budapest, Hungary
Bibliografia
  • [1] Atalay, M., Anafarta, N., Sarvan, F., The relationship between innovation and firm perfor-mance: an empirical evidence from Turkish automotive supplier industry, Proc-Soc Behav Sci, Vol. 75, pp. 226-235, 2013.
  • [2] Holm, M., Garcia, A. C., Adamson, G., Wang, L., Adaptive decision support for shop-floor operators in automotive industry, Proc CIRP, Vol. 17, pp. 440-445, 2014.
  • [3] Ganapathy, T., Gakkhar, R. P., Murugesan, K., Influence of injection timing on performance, combustion and emission characteristics of Jatropha biodiesel engine, Appl Energy, Vol. 88, pp. 4376-4386, 2011.
  • [4] Ong, H. C., Mahlia, T. M. I., Masjuki, H. H., Honnery, D., Life cycle cost and sensitivity analysis of palm biodiesel production, Fuel, Vol. 98, pp. 131-139, 2012.
  • [5] Alptekin, E., Canakci, M., Ozsezen, A. N., Turkcan, A., Sanli, H., Using waste animal fat based biodiesels-bioethanol-diesel fuel blends in a DI diesel engine, Fuel, Vol. 157, pp. 245-254, 2015.
  • [6] Arbab, M. I., Masjuki, H. H., Varman, M., Kalam, M. A., Imtenan, S., Sajjad, H., Fuel properties, engine performance and emission characteristic of common biodiesels as a renew-able and sustainable source of fuel, Renew Sustain Energy Rev, Vol. 22, pp. 133-147, 2013.
  • [7] Zhang, H., Zhou, Q., Chang, F., Pan, H., Liu, X.-F., Li, H., et al., Production and fuel properties of biodiesel from Firmiana platanifolia L.f. as a potential non-food oil source, Ind Crops Prod, Vol. 76, pp. 768-771, 2015.
  • [8] Nantha Gopal, K., Thundil Karupparaj, R., Effect of pongamia biodiesel on emission and combustion characteristics of di compression ignition engine, Ain Shams Eng J, Vol. 6, pp. 297-305, 2015.
  • [9] Mohsin, R., Majid, Z.A., Shihnan, A. H., Nasri, N. S., Sharer, Z., Effect of biodiesel blends on engine performance and exhaust emission for diesel dual fuel engine, Energy Convers Manage, Vol. 88, pp. 821-828, 2014.
  • [10] Cheung, C. S., Man, X. J., Fong, K. W., Tsang, O. K., Effect of waste cooking oil biodiesel on the emissions of a diesel engine, Energy Proc, Vol. 66, pp. 93-96, 2015.
  • [11] Antoine, J. P., Wavelet analysis of signals and images, A Grand Tour, Revista Ciencias Matematicas (La Habana), Vol. 18, pp. 113-143, 2000.
  • [12] Dutkay, D. E., Jorgensen, P. E. T., Wavelets on fractals, Rev. Mat. Iberoamericana, Vol. 22, pp. 131-180, 2004.
  • [13] Ekstrom, M., McEwen, A., Adaptive box filters for removal of random noise from digital įmages, Photogrammetric Engineering and Remote Sensing, Vol. 56 (4), p. 453, 1990.
  • [14] Horgan, G., Wavelets for SAR image smoothing, Photogrammetric Engineering and Remote Sensing. Vol. 64 (12), p. 1171, 1998.
  • [15] Hunt, B., Ryan, T. W., Gifford, F. A., Hough transform extraction of cartographic calibration marks from aerial photography, Photogrammetric Engineering and Remote Sensing, Vol. 59 (7), p. 1161, 1993.
  • [16] Kardoulas, N., Bird, A. C., Lawan, A. I., Geometric correction of SPOT and landsat imagery: a comparison of map and GPS derived control points, Photogrammetric Engineering and Remote Sensing, Vol. 62 (10), p. 1173, 1996.
  • [17] Koch, K. R., Einführung in die Bayes – Statistik, Springer Verlag, Berlin 2000.
  • [18] Koch, K. R., Parameterschätzung und Hypothesentests, Dümmlers Verlag, Bonn 1997.
  • [19] Skeivalas, J., Theory and practice of GPS networks, Technika, p. 288, Vilnius 2008.
  • [20] Jurevičius, M., Skeivalas, J., Kilikevičius, A., Turla, V., Vibrational analysis of length comparator, Measurement, Vol. 103, pp. 10-17, 2017.
  • [21] Kilikevičius, A., Kasparaitis, A., Dynamic research of multi-body mechanical systems of angle measurement, International Journal of Precision Engineering and Manufacturing, Vol. 18 (8), pp. 1065-1073, 2017.
Uwagi
PL
Opracowanie rekordu w ramach umowy 509/P-DUN/2018 ze środków MNiSW przeznaczonych na działalność upowszechniającą naukę (2018).
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-7a2d3252-c849-44e1-80dc-b9310fd7d944
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.