Thermal stability of protective coatings produced on nickel based superalloy

• Autorzy: Pytel M. , Góral M. , Motyka M. , Miziniak T
• Języki publikacji: EN

Abstrakty

EN

Purpose: In this paper the results of high temperature cyclic oxidation tests of the protective diffusion coatings were presented. One of the main purposes of this work was to produce three different types of protective coatings by three different methods, i.e. slurry method, vapour phase aluminizing (VPA) and chemical vapour deposition (CVD), applied on nickel based Rene 80 superalloy substrate. Design/methodology/approach: The high temperature cyclic oxidation tests were carried out in 23h cycles at constant temperature 1100°C using Carbolite CWF 1300 chamber furnace. The samples were removed outside and were weighted after each cycle. The microstructure investigations of all kinds of the coatings were conducted by the use of light microscope (Nikon Epiphot 300) and a scanning electron microscope (Hitachi S-3400N). In the analysis influence of each method have been taken into consideration, i.e. especially influence of the kind of process on microstructure, coating thickness, chemical composition, first of all aluminium content (in outer β-NiAl layer so-called additive layer, diffusion layer and substrate). For the chemical composition examination x-ray energy dispersive (EDS) method was applied using Thermo equipment. Findings: It was found that the best high cyclic oxidation resistance of coating was obtained using CVD method (the maximal increase of samples weight after 28th cycle was observed, whereas in case of the slurry sample after 3rd and VPA after 5th). Research limitations/implications: The research results will be used in the future in order to increase coating thickness, aluminium content and to produce Pt, Pd, Zr, Hf and Si modified aluminide coatings. Practical implications: The CVD method will be used to coat internal passages of turbine blades, for example to produce modified aluminide bond coats on single crystal nickel based superalloys. Originality/value: Chemical vapour deposition is an unique method which is a “pure method” and allows to coat hardly accessible locations/areas.

Słowa kluczowe

EN

metallic alloys; corrosion; erosion; thin and thick coatings; surface treatment; slurry; vapour phase aluminizing; chemical vapour deposition; protective coatings; aluminide coatings; high temperature oxidation

• Wydawca: International OCSCO World Press
• Czasopismo: Journal of Achievements in Materials and Manufacturing Engineering
• Rocznik: 2012
• Tom: Vol. 51, nr 2
• Strony: 67--77
• Opis fizyczny: Bibliogr. 10 poz., rys., tab.

Twórcy

autor

Pytel M.

• Department of Materials Science, The Faculty of Mechanical Engineering and Aeronautics, Rzeszow University of Technology, ul. Powstańców Warszawy 12, 35-959 Rzeszów, Poland

autor

Góral M.

• Department of Materials Science, The Faculty of Mechanical Engineering and Aeronautics, Rzeszow University of Technology, ul. Powstańców Warszawy 12, 35-959 Rzeszów, Poland

autor

Motyka M.

• Department of Materials Science, The Faculty of Mechanical Engineering and Aeronautics, Rzeszow University of Technology, ul. Powstańców Warszawy 12, 35-959 Rzeszów, Poland

autor

Miziniak T

• Department of Materials Science, The Faculty of Mechanical Engineering and Aeronautics, Rzeszow University of Technology, ul. Powstańców Warszawy 12, 35-959 Rzeszów, Poland

Bibliografia

• [1] M. Hetmańczyk, L. Swadźba, B. Mendala, Advanced materials and protective coatings in aero-engines application, Journal of Achievements in Materials and Manufacturing Engineering 24/1 (2007) 372-381.
• [2] G.W. Goward, D.H. Boone, Mechanisms of formation of diffusion aluminide coatings on nickel-base superalloys, Oxidation of Metals 3/5 (1971).
• [3] A. Squillace, R. Bonetti, N.J. Archer, J.A. Yeatman, The control of composition and structure of aluminide layers formed by vapour aluminizing, Surface and Coatings Technology 120-121 (1999) 118-123.
• [4] A. Feuerstein, J. Knapp, T. Taylor, A. Ashary, A. Bolcavage, N. Hitchman, Technical and economical aspects of current thermal barrier coating systems for gas turbine engines by thermal spray and EBPVD, Journal of Thermal Spray Technology 17/2 (2008) 199-213.
• [5] J. Rasmussen, A. Agüro, M. Gutierrez, M.J. Landeira Østergård, Microstructures of thin and thick slurry aluminide coatings on Inconel 690, Surface and Coatings Technology 202 (2008) 1479-1485.
• [6] A.B. Smith, A. Kepster, J. Smith, Vapour aluminide coating of internal cooling channels in turbine blades and vanes, Surface and Coatings Technology 120-121 (1999) 112-117.
• [7] Wen-Pin Sun, H.J. Lin, Min-Hsiung Hon, CVD aluminide nickiel, Metallurgical and Materials Transactions A 17/2 (1986) 215-220.
• [8] G. Moskal, B. Witala, A. Rozmysłowska, Metallographic preparation of the conventional and new TBC layers, Archives of Materials Science and Engineering 39/1 (2009) 53-60.
• [9] G. Moskal, The porosity assessment of thermal barrier coatings obtained by APS method, Journal of Achievements in Materials and Manufacturing Engineering 20 (2007) 483-486.
• [10] M. Yavorska, J. Sieniawski, Oxidation behaviour of platinum modified aluminide coatings deposited by CVD method on nickel-based superalloys under air atmosphere, Journal of Achievements in Materials and Manufacturing Engineering 46/2 (2011) 204-210.