The bending properties of laminated wood combined with plastic

• Autorzy: Gáborík Jozef
• Języki publikacji: EN

Abstrakty

EN

The bending properties of laminated wood combined with plastic. In the article we present the bending properties of laminated wood produced by the combination of beech veneer and plastic. The combination of wood and plastic enables us to create materials with different properties compared to solid wood. A small decrease in bending strength was demonstrated greater bendability laminated timber.

Słowa kluczowe

EN

laminated wood; veneer; foil; plastic; bend; bendability

• Wydawca: Wydawnictwo Szkoły Głównej Gospodarstwa Wiejskiego w Warszawie
• Czasopismo: Annals of Warsaw University of Life Sciences - SGGW. Forestry and Wood Technology
• Rocznik: 2014
• Tom: No. 88
• Strony: 70--73
• Opis fizyczny: Bibliogr. 12 poz.

Twórcy

autor

Gáborík Jozef

• Department of Furniture and Wood Products, Faculty of Wood Sciences and Technology, Technical University in Zvolen, Slovakia

Bibliografia

• 1. DUDAS J., VILHANOVÁ A., 2013: Sozdanije oblegčennoj fanery dľa konkretnych celej. Annals of Warsaw University of Life Sciences. 2013. No. 82, p. 235-241 ISSN 1898-59122.
• 2. GAFF M., GAŠPARÍK M., 2013: The development of stresses during the shaping of the surface of aspen wood and their impact on the quality of the surface . In: http://www.ncsu.edu/bioresources/BioRes_08/BioRes_08_3_3741_Gaff_Gasparik_Stresses_Shaping_Aspen_Wood_Quality_3977.pdf. In BioResources [online]. - ISSN 1930-2126. - Vol. 8, no. 3 (2013), p. 3741-3752.73.
• 3. GAŠPARÍK M., GAFF M., 2013: Changes in temperature and moisture content in beech wood plasticized by microwave heating. In: http://www.ncsu.edu/bioresources/BioRes_08/BioRes_08_3_3372_Gasparik_Gaff_Temp_Moisture_Content_Beechwood_Microwave_Heat_3974.pdf. In BioResources [online]. - ISSN 1930-2126. - Vol. 8, no. 3 (2013), p. 3372-3384.
• 4. LANGOVÁ N., JOŠČÁK P., GRIČ M., 2013: Strength properties of self-locking furniture joints with shape adapted for the production by CNC technology. In: Annals of Warsaw University of Life Sciences. Forestry and wood technology. - No. 83, p. 179-184 ISSN 1898-5912.
• 5. LANGOVÁ N., JOŠČÁK P., MOŽUCHOVÁ M., TRENČANOVÁ L., 2013: Analysis the effects bending load of veneers for purposes of planar moulding. In: Annals of Warsaw University of Life Sciences. Forestry and wood technology. - No. 83, p. 173-178 ISSN 1898-5912.
• 6. NEMEC L., 1993: Modelovanie technologických postupov lepenia. In: Zborník referátov. XI. sympózium. Pokroky vo výrobe a použití lepidiel v drevopriemysle. Zvolen TU: p. 413-424.
• 7. POŽGAJ A., CHOVANEC D., KURJATKO S., BABIAK M., 1993: Štruktúra a vlastnosti dreva. PRÍRODA a. s. Bratislava, 486 p. ISBN 80-07-00600-1.
• 8. SLABEJOVÁ G., ŠMIDRIAKOVÁ M., 2013: Bending strength of layered material based on wood and foamed PVC. In: Annals of Warsaw University of Life Sciences. Forestry and Wood Technology. - Warszawa : Warszaw University of Life Sciences Press, - No. 84, p. 180-185. ISSN 1898-5912.
• 9. SLABEJOVÁ G., ŠMIDRIAKOVÁ M., 2013: Influence of resin coating on strength and tensile deformation of beech veneer. In: Annals of Warsaw University of Life Sciences. Forestry and Wood Technology. - Warszawa : Warszaw University of Life Sciences Press, - No. 84, p. 186-189. ISSN 1898-5912.
• 10. VILHANOVÁ A., DUDAS J., 2013: Návrh konštrukcie vyľahčenej preglejky. In Pokroky vo výrobe a použití lepidiel v drevopriemysle : XXI. sympózium, Zvolen, June 26-28, 2013. Zvolen: Technická univerzita vo Zvolene, p. 193-198. ISBN 978-80-228-2529-0.
• 11. ZEMIAR J., GÁBORÍK J., 1993: Tendencie rozvoja technológie tvarovania dreva ohýbaním. In: Zborník referátov „Zvolen – mesto drevárskej vedy a praxe“. Zvolen TU: p. 395-403.
• 12. ZEMIAR J., et al., 1993: Bezodpadové technológie tvarovania dreva. VPA č.8, Zvolen TU: 122 p.