Tribological Characterization of Aluminum/Babbitt Composites and Their Application to Sliding Bearing

• Autorzy: Kolev M. , Drenchev L. , Stanev L.

Identyfikatory

DOI

10.24425/afe.2020.133326

• Języki publikacji: EN

Abstrakty

EN

The present work studies the tribological properties of new hybrid material composed from high porosity open cell aluminum alloy (AlSi10Mg) skeleton and B83 babbitt infiltrated into it. The porous skeleton is obtained by replication method applying salt (NaCl) as space holder. The reinforcing phase of the skeleton consists of Al₂O₃ particles. The skeleton contains Al₂O₃ particles as reinforcement. The microstructure of the obtained materials is observed and the tribological properties are determined. A comparison between tribological properties of nominally nonporous aluminum alloy, high porosity open cell skeleton, babbitt alloy and the hybrid material is presented. It is concluded that new hybrid material has high wear resistivity and is a promising material for sliding bearings and other machine elements with high wear resistivity.

Słowa kluczowe

EN

babbitt alloy; composite materials; tribological properties; sliding bearing

PL

babbit; kompozyty; właściwości trybologiczne; łożysko ślizgowe

• Wydawca: Komisja Odlewnictwa Polskiej Akademii Nauk Oddział w Katowicach
• Czasopismo: Archives of Foundry Engineering
• Rocznik: 2020
• Tom: Vol. 20, iss. 3
• Strony: 31--36
• Opis fizyczny: Bibliogr. 21 poz., rys., tab., wykr.

Twórcy

autor

Kolev M.

• Institute of Metal Science, Equipment, and Technologies “Acad. A. Balevski” at the Bulgarian Academy of Sciences

autor

Drenchev L.

• Institute of Metal Science, Equipment, and Technologies “Acad. A. Balevski” at the Bulgarian Academy of Sciences

autor

Stanev L.

• Institute of Metal Science, Equipment, and Technologies “Acad. A. Balevski” at the Bulgarian Academy of Sciences

Bibliografia

• [1] Conde, Y., Despois, J.F., Goodall, R., Marmottant, A., Salvo, L., San Marchi, C. & Mortensen, A. (2006). Replication processing of highly porous materials. Advanced Engineering Materials. 8(9), 795-803. DOI: 10.1002/adem.200600077.
• [2] Srivastava, A. (2017). Recent advances in metal matrix composites (MMCs): a review. Biomedical Journal of Scientific and Technical Research. 1, 520-522. DOI: 10.26717/BJSTR.2017.01.000236.
• [3] Hao, G.L., Han, F.S., Wu, J. & Wang, X.F. (2007). Damping properties of porous AZ91 magnesium alloy reinforced with copper particles. Materials Science and Technology. 23(4), 492-496. DOI: 10.1179/174328407X185758.
• [4] Boonyongmaneerat, Y. & Dunnand D.C. (2008). Ni‐Mo‐Cr foams processed by casting replication of sodium aluminate preforms. Advanced Engineering Materials. 10(4), 379-383. DOI: 10.1002/adem.200700300.
• [5] Stanev, L., Kolev, M., Drenchev, B., & Drenchev, L. (2016). Open-cell metallic porous materials obtained through space holders. Part I: production methods. A Review. ASME. Journal of Manufacturing Science and Engineering. 139(5), 050801-01-050801-21. DOI: 10.1115/1.4034439.
• [6] Stanev, L., Kolev, M., Drenchev, B. & Drenchev, L. (2016). Open-cell metallic porous materials obtained through space holders. Part II: Structure and Properties. A Review. ASME. Journal of Manufacturing Science and Engineering. 139(5), 050802-01-050802-31. DOI:10.1115/1.4034440.
• [7] Saravanan, C., Subramanian, K., Ananda, K.V. & Sankara, N.R. (2015). Effect of particulate reinforced aluminum metal matrix composite: A review. Mechanics and Mechanical Engineering. 19(1), 23-30.
• [8] Dasgupta, R. (2010). The stretch, limit and path forward for particle reinforced metal matrix composites of 7075 Al-alloys. Scientific Research Engineering. 2(4), 237-256. DOI: 10.4236/eng.2010.24034.
• [9] Bhushan, R.K., Kumar, S. & Das S. (2013). Fabrication and characterization of 7075 Al alloy reinforced with SiC particulates. The International Journal of Advanced Manufacturing Technology. 65, 611-624. DOI: 10.1007/s00170-012-4200-6.
• [10] Kandpal, B.C., Kumar, J. & Singh, H. (2017). Fabrication and characterisation of Al2O3/aluminum alloy 6061 composites fabricated by Stir casting. Materials Today: Proceedings A. 4(2), 2783-2792. DOI: 10.1016/ j.matpr.2017.02.157.
• [11] Parvin, N. & Rahimian, M. (2012). The characteristics of alumina particle reinforced pure al matrix composite. Acta Physica Polonica A. 121(1), 108-110. DOI: 10.12693/ APhysPolA.121.108.
• [12] Singh, J. (2016). Fabrication characteristics and tribological behavior of Al/SiC/Gr hybrid aluminum matrix composites: A review. Friction. 4(3), 191-207. DOI: 10.1007/ s40544-016-0116-8.
• [13] Ghosh, S., Sahoo, P. & Sutradhar G. (2013). Friction performance of Al-10%SiCp reinforced metal matrix composites using taguchi method. ISRN Tribology. 2013(Article ID 386861), 1-9. DOI: 10.5402/ 2013/386861.
• [14] Ahmad F., Jason Lo, S.H., Aslam, M. & Haziq, A. (2013). Tribology behaviour of alumina particles reinforced aluminum matrix composites and brake disc materials. Procedia Engineering. 68, 674-680. DOI: 10.1016/ j.proeng.2013.12.238.
• [15] El-Aziz, K.A., Saber, D. & Sallam, H.E.M. (2015). Wear and corrosion behavior of Al–Si matrix composite reinforced with alumina. Journal of Bio- and Tribo-Corrosion. 1(5), 1-10. DOI: 10.1007/s40735-014-0005-5.
• [16] Leszczyńska-Madej, B. & Madej, M. (2011). The Properties of Babbitt Bushes in Steam Turbine Sliding Bearings, Archives of Metallurgy and Materials. 56(3), 805-812. DOI: 10.2478/v10172-011-0089-6.
• [17] Barykin, N.P., Sadykov, F.A. & Aslanyan, I.R. (2000). Wear and failure of babbit bushes in steam turbine sliding bearings. Journal of Materials Engineering and Performance. 9(1), 110-115. DOI: 10.1361/ 105994900770346367.
• [18] Barykin, FN.P., Sadykov, F.A. & Aslanyan, I.R., (2000). Surface treatment of sliding bearing bushes. Trenie Iznos 21(6), 634-639.
• [19] Potekhin, B.A., Il'yushin, V.V., Khristolybov, A.S. (2009). Effect of casting methods on the structure and properties of tin babbit. Metal Science and HeatTreatment. 51(7), 378-382. DOI: 10.1007/s11041-009-9181-1.
• [20] ASTM G99, (1990). Standard test method for wear testing with a pin-on-disk apparatus.
• [21] Sadykov, F.A., Barykin, N.P., Valeev, I.Sh. & Danilenko, V.N. (2003). Influence of the structural state on mechanical behavior of Tin babbit. Journal of Materials Engineering and Performance. 12(1), 29-36. DOI: 10.1361/ 105994903770343448.

Uwagi

PL

Opracowanie rekordu ze środków MNiSW, umowa Nr 461252 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2020)