Implementation of FMEA method in maintenance of semi-trailer combination

• Autorzy: Galliková J. , Poprocký R. , Volna P.
• Języki publikacji: EN

Abstrakty

EN

The paper deals with the proposal of new maintenance system on a semi-trailer combination. Analysis of wear and damage of air brake system components used on the semi-trailer combination based on Real experience from practice and creation of the FMEA analysis of the system using software support are presented. The need for continuous improvement of product quality, reliability and safety arises from product specifications, government regulatory requirements, agency recommendations, legal implications and above all a company’s desire to improve its market position and customer satisfaction. These issues require product manufacturers to perform risk analyses that identify and minimize part/system failures throughout the product‘s life cycle. The FMEA methodology is one of the risk analysis techniques recommended by international standards. It is a systematic process to identify potential failures to fulfil the intended function, to identify possible failure causes so the causes can be eliminated, and to locate the failure consequences so the consequences can be reduced.

Słowa kluczowe

EN

FMEA; failure mode and effect analysis; risk priority number; air brake system; semitrailer

PL

FMEA; liczba priorytetowa ryzyka; pneumatyczny układ hamulcowy; naczepa

• Wydawca: Polskie Towarzystwo Diagnostyki Technicznej
• Czasopismo: Diagnostyka
• Rocznik: 2016
• Tom: Vol. 17, No. 4
• Strony: 85--92
• Opis fizyczny: Bibliogr. 20 poz., rys., tab.

Twórcy

autor

Galliková J.

• University of Žilina, Faculty of Mechanical Engineering, Department of Transport and Handling Machines, Univerzitná 1, 010 26 Žilina, Slovakia

autor

Poprocký R.

• University of Žilina, Faculty of Mechanical Engineering, Department of Transport and Handling Machines, Univerzitná 1, 010 26 Žilina, Slovakia

autor

Volna P.

• University of Žilina, Faculty of Mechanical Engineering, Department of Transport and Handling Machines, Univerzitná 1, 010 26 Žilina, Slovakia

Bibliografia

• 1. Galliková J, Poprocký R. Maintenance according to the technical state with use of the enterprise asset management systems. Zeszyty Naukowe Instytutu Pojazdów: mechanika, ekologia, bezpieczeństwo, mechatronika 2015; 3(103): 67-75.
• 2. Galliková J, Ruman F. Using of technical diagnostics for an analysis of failure causes and consequences of a selected vehicle. Logistyka 2015; 4:3296-3301.
• 3. Grenčík J. Manažérstvo údržby: synergia teórie a praxe. Košice: Beki Design 2013.
• 4. Grenčík J, Ruman F. Proposal of new maintenance system of air brake system on semi-trailer combination aimed at increase of operational safety. Autobusy: technika, eksploatacja, systemy transportowe 2013; 3(159): 1385-1392.
• 5. Grenčík J, Ruman F. Maintenance and failure consequences costs as a criterion for change of maintenance system - case study. TRANSCOM 2013: 253-256.
• 6. Grenčík J, Ruman F. Proposal of new maintenance scheme of air brake system on semi-trailer combination. Diagnostyka 2015; 16(2): 11-19.
• 7. Grenčík J, Ruman F, Kalinčák D. Freight wagon concept in relation in reliability and maintenance. Technológ. - Roč. 2015; 7(2): 43-47. Slovakia.
• 8. Grenčík J, Poprocký R, Stuchlý V, Zvolenský P. Evolution of maintenance systems of passenger and freight wagons from the ECM certification point of view. Komunikacie, 2013.
• 9. Volna P, Grenčík J, Olejnik K. Metódy posudzovania rizika koľajových vozidiel. Methods of risk assessment of rail vehicles. Národné fórum údržby 2016: 220-225. Slovakia.
• 10. Stuchlý V, Poprocký R. Údržba strojov a zariadení, 1. vyd. - Žilina: Žilinská Univerzita, 2013.
• 11. Dižo J, Blatnický M. Use of multibody system dynamics as a tool for the vehicle behaviour diagnostics. Zeszyty naukowe Instytutu Pojazdów: mechanika, ekologia, bezpieczeństwo, mechatronika 2015; 3(103): 37-46.
• 12. Blatnický M. Checks crane in: Manufacturing technology. Journal for Science. Research and Production 2015; 15(5): 766-771.
• 13. Dižo J, Blatnický M. Use of multibody system dynamics as a tool for rail vehicle behaviour diagnostics. Diagnostyka 2016; 17(2): 9-16.
• 14. Kašiar Ľ, Zvolenský P, Barta D, Drożdziel P. Diagnosis locomotive class 757. XV International Technical Systems Degradation Conference: Liptovský Mikuláš 2016: 47-50.
• 15. Šaderová J, Bindzár P. Definition of logistics activities during building of a concreting plant. Carpathian Logistics Congress, CLC 2012.
• 16. STN EN 13 306. Terminology of maintenenance. Validity from 1.3.2011.
• 17. STN EN 16602-30-02: Space product assurance - Failure modes, effect (and criticality) analysis (FMEA/FMECA).
• 18. STN EN 60812: Analysis technique for system reliability – Procedure for failure mode and effect analysis (FMEA).
• 19. STN EN ISO 9000-1 (010320): Quality management, validity from 1. 3. 1997.
• 20. STN 010380: Risk management, validity from 1. 3. 2003.