Systemic analysis of models of dynamic systems of shaft machining in elastic-deformable condition

• Autorzy: Taranenko G. , Taranenko V. , Szabelski J. , Świć A.
• Języki publikacji: EN

Abstrakty

EN

The paper presents methodology of developing models of dynamic systems of machining shafts in the elastic-deformable condition. The specifics of dynamic system (DS) identification concerning straight turning and straight and plunge grinding of low-rigidity shafts is presented. The specifics of the process of lowrigidity elements machining is taken into account through the introduction of suitable equations of constraint reflecting additional elastic strain in one of the equations describing the control force effect. Systemic analysis of the developed models is performed, and their hierarchical structure is given.

Słowa kluczowe

EN

identification; shaft; turning; grinding; systems analysis; hierarchy

• Wydawca: Polskie Towarzystwo Promocji Wiedzy ; Lublin University of Technology
• Czasopismo: Applied Computer Science
• Rocznik: 2007
• Tom: Vol. 3, no 2
• Strony: 115--138
• Opis fizyczny: Bibliogr. 18 poz., fig., tab.

Twórcy

autor

Taranenko G.

• National Technical University in Sevastopol, Ukraine

autor

Taranenko V.

• Lublin University of Technology, Lublin

autor

Szabelski J.

• Lublin University of Technology, Lublin

autor

Świć A.

• Lublin University of Technology, Lublin

Bibliografia

• [1] Adaptive control machine tools (in Russian) / Ed. B. S. BALAKSHINA. – М.: Mashinostroenie, 1973. – 688 s.
• [2] SOLOMENCEV J. M., MITROFANOV V. G., TARANENKO V. A.: Adaptive control of machine tools (in Slovak). Bratislava: ALFA, 1983. – 231 s.
• [3] BESEKERSKIJ V. А., POPOV Е. P.: Theory of automatic control systems (in Russian). – М.: Nauka, 1975. – 768 s.
• [4] ABAKUMOW A., TARANENKO W., ZUBRZYCKI J.: Program modules for the study of characteristics of the dynamic system of machining process (in Polish). Zeszyty Naukowe Politechniki Rzeszowskiej NR 230 MECHANIKA, z. 67 - Modułowe Technologie i Konstrukcje w Budowie Maszyn, Rzeszów 2006. – S. 99 - 109
• [5] ТАRANENKO V. А., ABAKUMOV A. M.: Dynamic models for estimation of precision of technological systems (in Russian). – М.: VNIITEMR, Vyp..1, 1989. – 54 s.
• [6] ABAKUMOV A., TARANENKO V., ZUBRZYCKI J:. Modeling of characteristics of dynamic system of turning process for axial-symmetric shafts. V-th INTERNATIONAL CONGRESS “MECHANICAL ENGINEERING TECHNOLOGIES, 06” (MT-06), September 20 -23. 2006, Varna, Bulgaria. PROCEDINGS. Section III. S.76 - 78
• [7] KUDINOV V. A.: Dynamika stankov. – М,: Mashinostroenie, 1967. – 267 s.
• [8] ABAKUMOV A., TARANENKO V., ZUBRZYCKI J. WOLOS D.: Controlling the dynamic system of machine tools by elastic-deformable shafts machining. PROGRESSIVNEJE TECHNOLOGII I SISTEMI MASHINOSTROYENNIA: Mezdynarodnyj zbornik nautschnyh trudov. – Doneck: DonNTY, 2006. Vypusk. 32. – s. 272 -278
• [9] TARANENKO W., ŚWIĆ A.: Technology of profiling machine parts with low rigidity (in Polish) . Wydawnictwo Politechniki Lubelskiej, Lublin 2005.- 282 s.
• [10] TARANENKO W., ŚWIĆ A:. Devices of control of machining precision of machine parts of low rigidity (in Polish). Wydawnictwo Politechniki Lubelskiej, Lublin 2006, 186 s.
• [11] ABAKUMOV A. M., TARANENKO V. А.: Dynamic properties of elastic systems in control of elastic-deformable state of parts of low rigidity (in Russian) // Dynamika stanotchnych sistem i gibkih avtomatizirovanych proizvodstv: Tezisy dokl. З-ey Vsesojuznoj nautsch.-techn.konf. – Togliatti, 1988. - s. 334-335
• [12] ABAKUMOV A. M., TARANENKO V. А.: Mathematical model of the process of turning of parts with low rigidity (in Russian) // Identyfikacja i avtomatizacya technologitscheskich procesov w maschinostroyenii: Sb.nautsch.tr.. – Kujbytschev, 1988. – s. 67-69
• [13] TARANENKO W., SZABELSKI J., TARANENKO G.: Fundamentals of identification of the dynamic system of turning of low-rigidity shafts (in Polish). Pomiary. Automatyka. Robotyka. Miesięcznik naukowo – techniczny, nr 2/2008, Warszawa 2008.
• [14] ABAKUMOV A. M., VORONIN P. А., DENKEVIC V. А. i dr.: Mathematical model of the processof turning with control of straight feed and spindle rotation speed (in Russian) // NIImash. – Dep. V VINITI, 1978, № 2.
• [15] ABAKUMOV A. M., VORONIN P. А., DENKEVIC V. А. i dr.: Identification of the process of straight turning / Algorithmization and automation of technological processes and industrial installations (in Russian): Mezvuz. sb. nautsch.tr. – Kujbytschev, 1974. –Vyp. 5. – s. 28 - 34
• [16] ZOREV N.N.: Calculation of cutting force projection (in Russian). - Moskwa: Mashinostroenie, 1958. - 58 s.
• [17] TARANENKO V. A., CHUB O. P.: Systemic approach to GAL synthesis of machining: Automation and control of processes (in Russian), Vestnik SevGTU, Sevastopol: вып.7, 1997
• [18] CVETKOV V. D.: Systemic-structural modelling and automation of technological processes (in Russian). – Minsk: Nauka i technika, 1979. – 261 s.