PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Research on Organic Coatings Designed for Underwater Applications

Treść / Zawartość
Identyfikatory
Warianty tytułu
Języki publikacji
EN
Abstrakty
EN
Underwater steel structures require periodic maintenance. In the case of vessels, anti-corrosion works are carried out in the shipyard, where very good conditions for applying organic protective coatings can be provided. Very good surface preparation can be obtained by the use of abrasive blasting. The well-prepared metal surface is free from impurities (particularly inorganic salts). Suitable conditions for the application and renovation of coatings are also ensured (creating appropriate climatic conditions, drying the air, setting the appropriate air temperature). However, there are underwater constructions that cannot be transferred above the water level and, therefore, their conservation against corrosion can take place only under the surface of the water, which significantly hinders the execution of renovation works. In this work, protective coatings for underwater application were tested. The application of coatings on selected steel surfaces over and under the water was carried out. Physico-mechanical and electrochemical tests were carried out in order to assess the quality of the obtained corrosion protection. The possible difficulties faced when applying coatings in marine conditions were discussed.
Słowa kluczowe
Twórcy
  • Gdansk University of Technology, Faculty of Chemistry, Department of Electrochemistry, Corrosion and Materials Engineering, 11/12 Narutowicza Str., 80-233 Gdańsk, Poland
  • Gdansk University of Technology, Faculty of Chemistry, Department of Electrochemistry, Corrosion and Materials Engineering, 11/12 Narutowicza Str., 80-233 Gdańsk, Poland
autor
  • Gdansk University of Technology, Faculty of Chemistry, Department of Electrochemistry, Corrosion and Materials Engineering, 11/12 Narutowicza Str., 80-233 Gdańsk, Poland
Bibliografia
  • [1] A. A. M. Husain, O. Al-Shamali, A. Abduljaleel, Desalination 166 (1), 295-304 (2004).
  • [2] Q. Zhou, Y. Wang, G. Bierwagen, Electrochim. Acta 142, 25-33 (2014).
  • [3] N. Fredj, S. Cohendoz, F. Xavier, S. Touzain, Progress in Org. Coat. 74 (2), 391-399 (2012).
  • [4] N. Fredj, S. Cohendoz, F. Xavier, S. Touzain, Progress in Org. Coat. 69 (1), 82-91 (2010).
  • [5] R. M. Jorda, Mater. Perform 10, 56-61 (1963).
  • [6] R. M. Jorda, Mater. Perform 10, 81 (1963).
  • [7] M. Dhanalakshmi, K. Maruthan, P. Jayakrishnan, N. S. Rengaswamy, Anti-Corr. Meth. & Mat. 44 (6), 393-399 (1997).
  • [8] T. S. Mally, A. L. Johnston, M. ChannShow, M. W. Keller, Compos. Struct. 100, 542-547 (2016).
  • [9] E. B. Stark, A. M. Ibrahim, T. E. Munns, J. C. Seferis, J. of Appl. Polymer Sci. 30, (4), 1717-1731 (1985).
  • [10] R. W. Drisko, Ninth Offshore Technology Conference, Dallas, Tex., 419-421 (1977).
  • [11] C. A. Giudice, B. Delamo, Corr. Prev. & Control 43 (2), 43-47 (1996).
  • [12] I. Renato, M. Grubisa, D. Miskovic. J. of Maritime & Transp. Sci. 55, 59-70 (2019).
  • [13] R. W. Drisko, J of Coat. Techn. 60 (10), 40-42 (1975).
  • [14] R. W. Drisko, Paint &Varnish Prod. 58, 31-34 (1968).
  • [15] R. W. Drisko, Corrosion Control by Coatings, H. Leidheiser, Jr., editor, Science Press, Princeton, N. J., 421-432 (1979)
Uwagi
PL
Opracowanie rekordu ze środków MNiSW, umowa Nr 461252 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2020).
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-77f95586-ac4b-4f73-8d16-07230d1d878e
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.