Quality management in heat treatment process

• Autorzy: Roszak M. , Krzemiński Ł.
• Języki publikacji: EN

Abstrakty

EN

Purpose: The purpose of this paper is to present the specifications of the CQI Heat Treat System Assessment, together with a discussion of the importance, development, implementation and use of this specification. An analysis of the quality management system of the selected organization was performed, which takes care of the thermo-chemical treatment-nitriding, as regards to the specification AIAG CQI-9. The study was carried out to compare the standards based on the scope of the organization covered by individual standards and their hierarchy, where the levels are adequate for the scope of the quality management system. Design/methodology/approach: An assessment of the compliance with the requirements of the CQI-9 based on the criteria closed in the documentation of the specification was performed, by evaluated according to the requirements imposed by the CQI-9, and determining the compliance of the quality system with the requirements determined in the documentation of the specification, with the subscription in the documentation. Findings: As a result of the audit of the nitriding process of selected part of the technology in relation to the requirements of the CQI-9 specification, the deficiencies were identified in relation to the requirements of the CQI-9 specification, and suggestions for their solutions were provided. Research limitations/implications: The paper presents the steps and how to verify the quality management system in the process of heat treatment. Practical implications: The result of the audit specifications CQI-9 detected non-compliance to requirements of the specification. The improvement of the quality management system, with some recommendations, allows to target the activities of the process to the needs and expectations of customers. Originality/value: The paper presents some requirements concerning the quality of the selected part of the thermo-chemical treatment process.

Słowa kluczowe

EN

quality; quality system management; ISO 9001; ISO 16949; TS 16949; Heat Treat System Assessment

PL

jakość; system zarządzania jakością; ISO 9001; ISO 16949; TS 16949; system oceny obróbki cieplnej

• Wydawca: International OCSCO World Press
• Czasopismo: Archives of Materials Science and Engineering
• Rocznik: 2013
• Tom: Vol. 61, nr 1
• Strony: 30--37
• Opis fizyczny: Bibliogr. 22 poz.

Twórcy

autor

Roszak M.

• Institute of Engineering Materials and Biomaterials, Silesian University of Technology, ul. Konarskiego 18a, 44-100 Gliwice, Poland

autor

Krzemiński Ł.

• Institute of Engineering Materials and Biomaterials, Silesian University of Technology, ul. Konarskiego 18a, 44-100 Gliwice, Poland

Bibliografia

• [1] AIAG CQI-9 Special Process, Heat Treat System Assessment, AIAG, Southfield, 2011.
• [2] Automotive - AIAG Guide aids TS 16949 registration, Quality Progress 36/9 (2003) 17-17.
• [3] AIAG document compares QS-9000 and TS 16949, Quality Progress 35/3 (2002) 21-22.
• [4] Technical Specifications ISO/TS 16949:2003 Quality management systems-Particular requirements for the application of ISO 9001:2000 for automotive and parts manufacturing organization, The Polish Committee for Standardization, Warsaw, 2007 (in Polish).
• [5] ISO 9001:2009 Quality management systems - Requirements, PKN, 2009.
• [6] A.T. Crepea, A systems engineering approach to technology assessment, Journal of clinical engineering 20/4 (1995) 297-303.
• [7] F. Franceschini, M. Galetto, D.A. Maisano, L. Mastrogiacomo, ISO/TS 16949: analysis of the diffusion and current trends, Proceedings of the Institution of Mechanical Engineers Part B, Journal Of Engineering Manufacture 225/B5 (2011) 735-745.
• [8] C. Lupo, ISO/TS 16949 the clear choice for automotive suppliers - Select the right system registration for your market, Quality Progress 35/10 (2002) 44-49.
• [9] R.D. Reid, Purchaser and supplier quality - Going beyond ISO 9001, QS-9000 and TS 16949, Quality Progress 35/8 (2002) 81.
• [10] D. Scrimshire, QS-9000 goes international with ISO/TS 16949, Proceedings of the 54th Annual Quality Congress ASQ'S’2000, 665-672.
• [11] M. Warnack, Continual improvement programs and ISO 9001: 2000, Quality Progress 36/3 (2003) 42-49.
• [12] S. Liebesman, Continual improvement using ISO 9001, Quality Progress 36/1 (2003) 62-63.
• [13] A. Blecken, A. Zobel, E. Maurantzas, Development of a lean quality management system, an integrated management system, advanced manufacturing and sustainable logistics, Advanced Manufacturing and Sustainable Logistics 46 (2010) 141-151.
• [14] A. Wierzbic, The evaluation of management quality systems, Control of documents and records, Management of Technological Changes 1 (2005) 435-440.
• [15] L. Maglic, Z. Kondic, M. Kljajin, Quality audits of management systems, Strojniski Vestnik, Journal of Mechanical Engineering 55/11 (2009) 659-700.
• [16] M.T. Roszak, Methodology of evaluation of value created in the productive processes, Journal of Achievements in Materials and Manufacturing Engineering 31/2 (2008) 810-815.
• [17] M.T. Roszak, Quality assurance in the process of hardening, Proceedings of the 17th International Scientific Conference on “Contemporary Achievements in Mechanics, Manufacturing and Materials Science” CAM3S'2011, Gliwice-Wrocław, 2011, 78 (in Polish).
• [18] M.T. Roszak, S. Tkaczyk, Chosen aspects of evaluation of productive processes on the example of productive chains of sections type V29, Proceedings of the Worldwide Congress on “Materials and Manufacturing Engineering and Technology” COMMENT'2005, Gliwice-Wisła, 2005, 1-4.
• [19] V. K. Chong, M.J. Rundus, Total quality management, market competition and organizational performance, The British Accounting Review 36/2 (2004) 155-172.
• [20] A. Das, R.B. Handfield, R.J. Calantone, S.A. Ghosh, A contingent view of quality management - the impact of international competition on quality, Decision Sciences 31/3 (2000) 649-690.
• [21] M. Dudek-Burlikowska, Using control charts X-R monitoring a chosen production Process, Journal of achievement in Materials and manufacturing Engineering, 49/2 (2011) 487-498.
• [22] M. Dudek-Burlikowska, Application of FMEA method in enterprise focused on quality, Journal of Achievement in Materials and Manufacturing Engineering 45/1 (2001) 89-102.