Possibilities of increasing production efficiency by implementing elements of augmented reality

• Autorzy: Trojanowska Justyna , Kaščak Jakub , Husár Jozef , Knapčíková Lucia

Identyfikatory

DOI

10.24425/bpasts.2022.143831

• Języki publikacji: EN

Abstrakty

EN

The publication reflects the current situation concerning the possibilities of using augmented reality (AR) technology in the field of production technologies with the main intention of creating a tool to increase production efficiency. It is a set of individual steps that respond in a targeted manner to the possible need for assisted service intervention on a specific device. The publication chronologically describes the procedure required for the preparation and processing of a CAD model. For this preparatory process, the PTC software package is used which meets the requirements for each of the individual operations. The first step is the routine preparation of CAD models and assemblies. These are prepared based on real models located on the device, and their shape and dimensions correlate with the dimensions of the model on the device. The second phase is the creation and timing of the disassembly sequence. This will provide the model with complete vector data, which is then paired with the CAD models in AR. This phase is one of the most important. It determines the location of the model concerning its relative position on the device, provides information on the relocation of parts of the model after the sequence is started, and essentially serves as a template for the interactive part of the sequence. The last two phases are used to connect CAD models with vector data, determine their position for the position mark, and prepare the user interface displayed on the output device. The result of this procedure is a functional disassembly sequence, used for assisted service intervention of a worker in the spindle drive of the Emco Mill 55 device.

Słowa kluczowe

EN

production efficiency; production equipment; augmented reality; Industry 4.0; maintenance

PL

wydajność produkcji; sprzęt produkcyjny; rozszerzona rzeczywistość; Przemysł 4.0; utrzymanie

• Wydawca: Polska Akademia Nauk, Wydział IV Nauk Technicznych
• Czasopismo: Bulletin of the Polish Academy of Sciences. Technical Sciences
• Rocznik: 2022
• Tom: Vol. 70, nr 6
• Strony: art. no. e143831
• Opis fizyczny: Bibliogr. 21 poz., rys.

Twórcy

autor

Trojanowska Justyna

• Poznan University of Technology, Faculty of Mechanical Engineering, Department of Production Engineering, Piotrowo Street 3, 61-138 Poznan, Poland

autor

Kaščak Jakub

• Technical University of Košice, Faculty of Manufacturing Technologies with a seat in Prešov, Department of Computer Aided Manufacturing Technology, Šturova 31, 080 01 Prešov, Slovak Republic

• https://orcid.org/0000-0002-3283-8209

autor

Husár Jozef

• Technical University of Košice, Faculty of Manufacturing Technologies with a seat in Prešov, Department of Industrial Engineering and Informatics, Bayerova 1, 080 01 Prešov, Slovak Republic

• https://orcid.org/0000-0002-2576-7238

autor

Knapčíková Lucia

• Technical University of Košice, Faculty of Manufacturing Technologies with a seat in Prešov, Department of Industrial Engineering and Informatics, Bayerova 1, 080 01 Prešov, Slovak Republic

• https://orcid.org/0000-0003-1925-4038

Bibliografia

• [1] J. Carmigniani, B. Furht, M. Anisetti, P. Ceravolo, E. Damiani, and M. Ivkovic, “Augmented reality technologies, systems and applications,” Multimed Tools Appl., vol. 51, p. 341–377, 2011, doi: 10.1007/s11042-010-0660-6.
• [2] J. Fegert et al., “Ich sehe was, was du auch siehst. Über die Möglichkeiten von Augmented und Virtual Reality für die digitale Beteiligung von Bürger:innen in der Bau- und Stadtplanung – On the Potential of Augmented and Virtual Reality for the Digital Participation of Citizens in Construction and Urban Planning,” HMD Praxis derWirtschaftsinformatik, vol. 58, no. 5, pp. 1180–1195, 2021, doi: 10.1365/s40702-021-00772-6.
• [3] S. Conway, The total economic impactTM of PTC Vuforia: Cost savings and business benefits enabled by industrial augmented reality, Forrester Research, Inc., 2019.
• [4] “Augmented reality is changing marketing and sales,” Ventana Research, 2018. [Online]. Available: https://www.pdsvision.com/wp-content/uploads/2019/05/Ventana-Research-Augmented-Reality-is-Changing-Marketing-Sales.pdf (accessed Jul 13, 2022).
• [5] V. Ivanov, I. Pavlenko, O. Liaposhchenko, O. Gusak, and V. Pavlenko, “Determination of contact points between workpiece and fixture elements as a tool for augmented reality in fixture design,” Wirel. Netw., vol. 27, no. 3, pp. 1657–1664, 2021, doi: 10.1007/s11276-019-02026-2.
• [6] R. Costa, J. Neves, P. Novais, J. Machado, L. Lima, and C. Alberto, “Intelligent mixed reality for the creation of ambient assisted living,” Portuguese Conference on Artificial Intelligence, pp. 323–331, 2007. doi: 10.1007/978-3-540-77002-2_27.
• [7] R. Aggarwal and A. Singhal, “Augmented Reality and its effect on our life,” 2019 9th International Conference on Cloud Computing, Data Science & Engineering (Confluence), 2019, pp. 510–515, doi: 10.1109/CONFLUENCE.2019.8776989.
• [8] M. Straka, A. Rosová, R. Lenort, P. Besta, and J. Šaderová, “Principles of computer simulation design for the needs of improvement of the raw materials combined transport system,” Acta Montan. Slovaca, vol. 23, no. 2, pp.163–174, 2018.
• [9] M. Malindzakova, M. Straka, A. Rosova, M. Kanuchova, and P. Trebuna, “Modeling the process for incineration of municipal waste,” Przemysl Chemiczny, vol. 94, no. 8, pp. 1260–1264, 2015, doi: 10.15199/62.2015.8.4.
• [10] M. Sereno, X. Wang, L. Besançon, M. J. McGuffin, and T. Isenberg, “Collaborative work in augmented reality: A survey,” IEEE Trans. Vis. Comput. Graph., vol. 28, no. 6, pp. 2530–2549, 2022, doi: 10.1109/TVCG.2020.3032761.
• [11] S. Luscinski and V. Ivanov, “A Simulation Study of Industry 4.0 Factor on the Ontology on Flexibility with Using Flexim (R) Software,” Manag. Prod. Eng. Rev., vol. 11, no. 3, pp. 74–83, 2020, doi: 10.24425/mper.2020.134934.
• [12] D. Perakovic, M. Perisa, and R.E. Sente, “Information and Communication Technologies Within Industry 4.0 Concept,” Advances in Design, Simulation and Manufacturing, DSMIE 2018, 2019, pp. 127–134, doi: .
• [13] J.T.P. Shirley and S. Malathi, “A Preview of Augmented Reality as Pioneering Method in Education,” 2020 9th International Conference System Modeling and Advancement in Research Trends (SMART), 2020, pp. 474–479, doi: 10.1109/SMART50582.2020.9337125.
• [14] M. Lorenz, S. Knopp, and P. Klimant, “Industrial augmented reality: Requirements for an augmented reality maintenance worker support system,” 2018 IEEE International Symposium on Mixed and Augmented Reality Adjunct (ISMAR-Adjunct), pp. 151–153, 2018, doi: 10.1109/ISMAR-Adjunct.2018.00055.
• [15] P. Buń, J. Trojanowska, V. Ivanov, and I. Pavlenko, “The use of virtual reality training application to increase the effectiveness of workshops in the field of lean manufacturing,” 4th International Conference of the Virtual and Augmented Reality in Education, VARE 2018, pp. 65–71, 2018.
• [16] N. Horňáková, D. Cagáňová, J. Štofková, and R. Jurenka, “Industry 4.0 future prospects and its impact on competencies,” Grabchenko’s International Conference on Advanced Manufacturing Processes, InterPartner 2019, 2020, pp. 73–84, doi: 10.1007/978-3-030-40724-7_8.
• [17] J. Trojanowska, A. Kolinski, D. Galusik, M.L.R. Varela, and J. Machado, “A methodology of improvement of manufacturing productivity through increasing operational efficiency of the production process,” Advances in Manufacturing, 2018, pp. 23–32, doi: 10.1007/978-3-319-68619-6_3.
• [18] L. Knapčíková, J. Husár, A. Behúnová, and S. Hrehová, “Augmented reality as a tool of increasing of competitiveness of enterprise,” Future Access Enablers for Ubiquitous and Intelligent Infrastructures. FABULOUS 2021, 2021, vol. 382, pp. 337–349, doi: 10.1007/978-3-030-78459-1_25.
• [19] J. Maščenik, “Experimental determination of cutting speed influence on cutting surface character in material laser cutting,” MM Sci. J., vol. 2016, pp. 960–963, 2016, doi: 10.17973/MMSJ.2016_09_201639.
• [20] T. Coranic, S. Gaspar, and J. Pasko, “Utilization of optimization of internal topology in manufacturing of injection moulds by the DMLS technology,” Appl. Sci., vol. 11, no. 1, p. 262, 2021, doi: 10.3390/app11010262.
• [21] A. Kujawińska and M. Diering, “The impact of the organization of the visual inspection process on its effectiveness,” Int. J. Adv. Manuf. Technol., vol. 112, pp. 1295–1306, 2021, doi: 10.1007/s00170-020-06543-9.

Uwagi

Opracowanie rekordu ze środków MEiN, umowa nr SONP/SP/546092/2022 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2022-2023).