Solar cell parameters extraction optimization using Lambert function

• Autorzy: Aichouba Mohammed El Amine , Rahli Mustapha

Identyfikatory

DOI

10.15199/48.2019.04.43

Warianty tytułu

PL

Opis parametrów ogniwa fotowoltaicznego z wykorzystaniem funkcji Lamberta

• Języki publikacji: EN

Abstrakty

EN

Solar cells are characterized by internal electrical parameters not displayed by the manufacturer. Their identification is necessary because it allows the photovoltaic system simulation and optimization. Currently, the new and simple extraction methods development is a challenge for researchers. In this work, a new approach is presented for exact determination the single-diode model multi-crystalline silicon cell five parameters. Our method consists in calculating the parameters from the ideality factor estimation using the Lambert function and the parasitic resistances curve (series and shunt). Absolute and relative errors are also calculated to show the proposed method importance over another method.

PL

W artykule zaprezentowano mtodę opisu matematycznego obwodu fotowoltaicznego. Metoda polega na opisie parametrów z wykorzystaniem funkcji Lamberta. . Określono błąd przybliżenia tego modelu matematycznego.

Słowa kluczowe

EN

parameter extraction; solar cell modelling; Lambert function; ideality factor

PL

ogniwo fotowoltaiczne; funkcja Lamberta

• Wydawca: Wydawnictwo SIGMA-NOT
• Czasopismo: Przegląd Elektrotechniczny
• Rocznik: 2019
• Tom: R. 95, nr 4
• Strony: 227--231
• Opis fizyczny: Bibliogr. 27 poz., rys., tab., wykr.

Twórcy

autor

Aichouba Mohammed El Amine

• Université des Sciences et de la Technologie d’Oran Mohamed BOUDIAF USTO-MB, FGE, BP 1505 El M'Naouer, 31000 Oran, Algerie

autor

Rahli Mustapha

• Université des Sciences et de la Technologie d’Oran Mohamed BOUDIAF USTO-MB, FGE, BP 1505 El M'Naouer, 31000 Oran, Algerie

Bibliografia

• [1] C. Sharma, and A. Jain; "Distributed MPP Tracking of PV through buck converter using fuzzy";Telkomnika Indonesian Journal of Electrical Engineering, DOI: 10.11591/telkomnika.v15i2.8258, Vol. 15, No. 2,pp 197-208. (2015)
• [2] K. Yamaguchi and H. Kodera, "Optimum Design of Triode-Like JFET’s by Two-Dimensional Computer Simulation", IEEE Transaction on Electron Devices, DOI:10.1109/TED.1977.18877, Vol. 24, Issue: 8, August 1977, pp. 1061-1069.
• [3] E. Chahid, M. I. Oumhand, M. Feddaoui, M. Erritali, and A. Malaoui, "Effect of Measurement Factors on Photovoltaic Cell Parameters Extracting", International Journal of Electrical and Computer Engineering (IJECE), DOI: 10.11591/ijece.v7i1, Vol. 7, No. 1, February 2017, pp. 50-57.
• [4] W. Shockley, "The theory of p-n junctions in semiconductors and p-n junction transistors", Bell System Technical Journal, Vol. 28, No. 3, July 1949, pp 435-489.
• [5] M. Rhouma, A. Gastli, L. Ben Brahim, F. Touati, and M. Benammar, "A simple method for extracting the parameters of the PV cell single-diode model", Renewable Energy, DOI:10.1016/j.renene.2017.06.064, Vol. 113, December 2017, pp 885-894.
• [6] A. Malaoui, "New method for improving the quality of electrical measurements: application to the extraction of the intrinsic parameters of the photo voltaic cells", International Journal of Innovation and Applied Studies, Vol. 15, No. 2, pp 375-386, April 2016.
• [7] N. S. Singh, A. Jain, and A. Kapoor, "An Exact Analytical Method for Calculating the Parameters of a Real Solar Cell Using Special Trans Function Theory (STFT) ", International Journal of Renewable Energy Research, Vol.3, No.1, pp 201206, January 2013.
• [8] A. Jain, and A. Kapoor, "A new approach to study organic solar cell using Lambert W-function", Solar Energy Materials & Solar Cells, DOI:10.1016/j.solmat.2004.07.004, Vol. 86, March 2005, pp 197-205. (Article)
• [9] A. Ortiz-Conde, and F. J. Garcia Sanchez, "Extraction of nonideal junction model parameters from the explicit analytic solutions of its I–V characteristics", Journal Solid-State Electronics, DOI:10.1016/j.sse.2004.12.001, Vol. 49, March 2005, pp 465-472.
• [10] J. Ding, and R. Radhakrishnan, "A new method to determine the optimum load of a real solar cell using the Lambert Wfunction", Solar Energy Materials and Solar Cells, DOI: 10.1016/j.solmat.2008.07.004, Vol. 92, December 2008, pp 1566-1569.
• [11] A. Ortiz-Conde, F. J. Garcia Sanchez, and J. Muci, "New method to extract the model parameters of solar cells from the explicit analytic solutions of their illuminated I–V characteristics", Solar Energy Materials and Solar Cells, DOI: 10.1016/j.solmat.2005.04.023, Vol. 90, February 2006, pp 352361.
• [12] C. Zhang, J. Zhang, Y. Hao, Z. Lin, and C. Zhu, "A simple and efficient solar cell parameter extraction method from a single current-voltage curve", Journal of Applied Physics, DOI: 10.1063/1.3632971, Vol. 110, September 2011, pp. 064504.
• [13] S. Aazou, and E.M. Assaid, "Model physical parameters effects on real solar cell characteristics and power curve", Global Journal of Physical Chemistry,Vol. 2,pp. 61-67, 2011.
• [14] F. Ghani, and M. Duke, "Numerical determination of parasitic resistances of a solar cell using the Lambert W-function", Solar Energy, DOI: 10.1016/j.solener.2011.07.001, Vol. 85, September 2011, pp. 2386-2394.
• [15] F. Ghani, M. Duke, and J. Carson, "Numerical calculation of series and shunt resistances and diode quality factor of a photovoltaic cell using the Lambert W-function", Solar Energy, DOI: 10.1016/j.solener.2012.09.005, Vol. 91, May 2013,pp. 422-431.
• [16] A. A. El tayyan, "An approach to extract the parameters of solar cells from their illuminated I-V curves using the Lambert Wfunction", Turkish Journal of Physics, DOI: 10.3906/fiz-1309-7, Vol. 91, January 2015, pp. 1-15.
• [17] W. G. Pfann, and W. Roosbroeck, "Radioactive and Photoelectric pn Junction Power Sources", Journal of AppliedPhysics, DOI: 10.3906/fiz-1309-7, Vol. 25, 1954, pp. 1422.
• [18] M. B. Prince, "Silicon solar energy converters", Journal of Applied Physics, DOI: 10.1063/1.1722034, Vol. 26, 1955, pp. 534.
• [19] M. Wolf, and H. Rauschenbach, "Series resistance effects on solar cell measurements", Advanced Energy Conversion, DOI: 10.1016/0365-1789(63)90063-8, Vol. 3, 1963, pp. 455-479.
• [20] E. E. Van Dyk, and E. L. Meyer, "Analysis of the effect of parasitic resistances on the performance of photovoltaic modules", Renewable Energy, DOI: 10.1016/S09601481(03)00250-7, Vol. 29, 2004, pp. 333-334. [4] Yi-hung Lin, Raymond A. Adomaitis, “A global basis function approach to DC glow discharge simulation”, Physics letters, A 243 (1998), 142-150
• [21] K. L. Kennerud, "Analysis of performance degradation in CdS solar cells", IEEE Transactions onAerospace and Electronic Systems, DOI: 10.1109/TAES.1969.309966, Vol. AES-5, 1969,pp. 912-917.
• [22] W. Xiao, W.G. Dunford, and A. Capel, "A Novel Modeling Method for Photovoltaic Cells", IEEE 35th Annual Power Electronics Specialists Conference, Aachen, Vol. 3, pp. 19501956, 20-25 June 2004.
• [23] D. Sera, R. Teodorescu, and P. Rodriguez, "PV panel model based on datasheet values", IEEE International Symposium on Industrial Electronics, DOI: 10.1109/ISIE.2007.4374981,Vigo (Spain), pp. 2392-2396, 4-7 June 2007.
• [24] J. Cubas, S. Pindado, and C. Manuel, "Explicit Expressions for Solar Panel Equivalent Circuit Parameters Based on Analytical Formulation and the Lambert W-Function", Energies, DOI: 10.3390/en7074098, Vol. 7, June 2014,pp. 4098-4115.
• [25] C. Carrero, D. Ramirez, J. Rodriguez, and C.A. Platero, "Accurate and fast convergence method for parameter estimation of PV generators based on three main points of the I-V curve", Renewable Energy, DOI: 10.1016/j.renene.2011.04.001, Vol. 36, N° 11,November 2011,pp. 2972-2977.
• [26] M. G. Villalva, J. R. Gazoli, and E. R. Filho, "Comprehensive Approach to Modeling and Simulation of PV Arrays", IEEE Power Electronics, DOI:10.1109/TPEL.2009.2013862, Vol. 24, No. 5, May 2009, pp. 1198-1208.
• [27] P. Huang, W. Xiao, J. Peng, and J. Kirtley, "Comprehensive Parameterization of Solar Cell: Improved Accuracy with Simulation Efficiency", IEEE Transactions on IndustrialElectronics, DOI: 10.1109/TIE.2015.2498139, Vol. 63, No. 3,2016,pp. 1549-1560.

Uwagi

Opracowanie rekordu w ramach umowy 509/P-DUN/2018 ze środków MNiSW przeznaczonych na działalność upowszechniającą naukę (2019).