Bond between single artificial teeth and the base plate in removable denture metal framework

• Autorzy: Taczała J. , Sawicki J.

Identyfikatory

DOI

10.5604/01.3001.0012.7971

• Języki publikacji: EN

Abstrakty

EN

Purpose: The purpose of this paper is to analyse attempts at improving the bond between acrylic artificial teeth and the denture base plate - considered in the context of single incisors in framework denture. Design/methodology/approach: It is a review article focusing on the analysis of state of the art in the field of the bond between the polymerised acrylic (teeth) and the polymerising acrylic resin during the production of denture (denture plate). Previous works regard the issue of individual incisor teeth (both upper and lower) breaking off from the metal partial denture. Findings: The bond between artificial acrylic teeth and the acrylic denture plate of the prosthesis was discussed. Ways of improving this bond were also presented. Although researchers and companies offer many methods for improving this bond, none of them refer directly to the issue discussed in this article. In conclusion- the hitherto scientific achievements work well in the case of acrylic prostheses without a metal frame, which constitutes an obstacle for achieving the effect required. In this work, it is suggested that further research would not only develop and provide more detail on the issue of the bond between artificial teeth and the denture plate, but also solve the problem appearing in cases of metal partial denture. Originality/value: This article shows a significant problem that hasn’t been discussed in detail in the past.

Słowa kluczowe

EN

polymeric; PMMA; removable partial denture metal framework; bond

PL

PMMA; szkło akrylowe; przyczepność

• Wydawca: International OCSCO World Press
• Czasopismo: Journal of Achievements in Materials and Manufacturing Engineering
• Rocznik: 2018
• Tom: Vol. 90, nr 1
• Strony: 11--21
• Opis fizyczny: Bibliogr. 45 poz., tab.

Twórcy

autor

Taczała J.

• Institute of Materials Science and Engineering, Lodz University of Technology, ul. Stefanowskiego 1/15, 90-924 Łódź, Poland

autor

Sawicki J.

• Institute of Materials Science and Engineering, Lodz University of Technology, ul. Stefanowskiego 1/15, 90-924 Łódź, Poland

Bibliografia

• [1] The announcement of the Poland Minister of Health of 16 December 2016 on the publication of a uniform text of the Regulation of the Minister of Health on guaranteed services in the field of dental treatment, Poland, 2013 (in Polish).
• [2] O. Grosfeldowa, A. Budkiewicz, Physiology of the masticatory system: book for dentistry students, PZWL, 1981 (in Polish).
• [3] S.B. Patil, B.H. Neveen, N.P. Patil, Bonding acrylic teeth to acrylic resin denture bases: a review, Gerodontology 23 (2006) 131-139.
• [4] U.R. Darbar, R. Huggett, A. Harrison, Denture fracture: A survey, British Dental Journal 176 (1994) 342-345.
• [5] A.C. Colebeck, E.A. Monaco, C.R. Pusateri, E.L. Davis, Microtensile Bond Strength of Different Acrylic Teeth to High-Impact Denture Base Resins, Journal of Prosthodontics 24 (2015) 43-51.
• [6] B. Dejak (Ed.), Compendium of making prosthetic restorations, Med. Tour Press International, 2014.
• [7] Renfert. Removable partial denture metal framework. Analysis, planning and implementation, 2008.
• [8] Dentaurum GmbH & Co. KG. Remanium Compendium, 2008.
• [9] S.S. Phukela, S.K. Chinatalapudi, H. Sachdeva, R.S. Dhall, N. Sharma, A. Prabhu, Comparative evaluation of different mechanical modifications of denture teeth on bond strength between high-impact acrylic resin and denture teeth: An in vitro study, Journal of International Society of Preventive and Community Dentistry 6 (2016) 161-166.
• [10] S.W. Majewski, M. Pryliński, Materials and technologies of contemporary dental prosthetics: a textbook for dentistry students, doctors and dental technicians, Czelej, 2013.
• [11] D.R. Radford, A.S. Juszczyk, R.K.F. Clark, Achieving a good bond in acrylic resin denture teeth, BDJ Team 1 (2014) 14061, DOI: 10.1038/bdjteam.2014.61.
• [12] A. Bhochhibhoya, S. Mathema, B. Maskey, An Evaluation on Effect of Surface Treatment and Mechanical Modifications on Shear Bond Strength between Acrylic Denture Teeth and Heat Cure Acrylic Denture Base Resin, EC Dental Science 6 (2016) 1450-1462.
• [13] Z. Raszewski, A new look at acrylic plastics, Elamed, 2009.
• [14] Y. Takahashi, J. Chai, T. Takahashi, T. Habu, Bond Strength of DentureTeeth to Denture Base Resin, The International Journal of Prosthodontics 13 (2000) 59-65.
• [15] N.S. Yadav, S. Somkuwar, S.K. Mishra, P. Hazari, R. Chitumalla, S.K. Pandey, Evaluation of Bond Strength of Acrylic Teeth to Denture Base using Different Polymerization Techniques: A Comparative Study, Journal of International Oral Health 7 (2015) 54-56.
• [16] J.M.S. Clancy, D.B. Boyer, Comparative bond strengths of ligth-cured, heat-cured, and auto-polymerizing denture resins to denture teeth, The Journal of Prosthetic Dentistry 61 (1989) 457-462.
• [17] R.L. Schneider, E.R. Curtis, J.M.S. Clancy, Tensile bond strength of acrylic resin denture teeth to a microwave- or heat-processed denture base, Journal of Prosthetic Dentistry 88 (2002) 145-150.
• [18] N.W. Rupp, R.L. Bowen, G.C. Paffenbarger, Bonding Cold-Curing Denture Base Acrylic Resin to Acrylic Resin Teeth, The Journal of the American Dental Association 83 (1971) 601-606.
• [19] H. Albargouty, A.S. Juszczyk, D.R. Radford, R.K.F. Clark, Tensile bond strength of heat and outer layers of two-layered acrylic resin denture teeth, The European Journal of Prosthodontics and Restorative Dentisty 15 (2007) 81-83.
• [20] A. Dalal, A.S. Juszczyk, D.R. Radford, R.K.F. Clark, Effect of curing cycle on the tensile strength of the bond between heat cured denture base acrylic resin and acrylic resin denture teeth, The European Journal of Prosthodontics and Restorative Dentisty 17 (2009) 146-149.
• [21] R. Consani, H. Naoe, M. Mesquita, M. Sinhoreti, W. Mendes, Effect of Surface treatments on the bond strength of different resin teeth to complete denture base material, Acta Odontológica Latinoam 26 (1984) 37-42.
• [22] G. Saavedra, M.P. Neisser, M.A.C. Sinhoreti, C. Machado, Evaluation of bond strength of denture teeth bonded to heat polymerized acrylic resin denture bases, Brazilian Journal of Oral Sciences 3 (2004) 458-464.
• [23] R. Patil, A.S. Juszczyk, D.R. Radford, R.K.F. Clark, Is the bond between acrylic resin denture teeth and denture base resin stronger if they are both made by the same manufacturer?, The European Journal of Prosthodontics and Restorative Dentisty 18 (2010) 39-41.
• [24] C.E. Vergani, A.L. Machado, E.T. Giampaolo, A.C. Pavarina, Effect of the Surface treatments on the bond strength between composite resin and acrylic resin denture teeth, The International Journal of Prosthodontics13 (2000) 383-386.
• [25] A. Palitsch, M. Hanning, P. Ferger, M. Balkenhol, Bonding of acrylic denture teeth to MMA/PMMA and light-curing denture base materials: The role of conditioning liquids, Journal of Dentistry 40 (2012) 210-221.
• [26] G.A.V.M. Geerts, C.H. Jooste, A comparison of the bond strengths of microwave- and water bath-cured denture material, The Journal of Prosthetic Dentistry 70 (1993) 406-409.
• [27] S. Suzuki, M. Sakoh, A. Shiba, Adhesive bonding of denture base resins to plastic denture teeth, Journal of Biomedical Materials Research 24 (1990) 1091-1103.
• [28] M. Kurt, Y. Ş. Saraç, C. Ural, D. Saraç, Effect of processing methods on bond strength between acrylic resin teeth and acrylic denture base resin, Gerodontology 29 (2012) 357-362.
• [29] G. Jain, U. Palekar, V. Awinashe, S.K. Mishra, A. Kawadkar, T. Rahangdale, The effect of different chemical surface treatments of denture teeth on shear bond strength: A Comparative Study, Journal of Clinical and Diagnostic Research: JCDR 8 (2014) 15-19.
• [30] Dreve Dentamid GmbH. Castdon Resin, http://dentamid.dreve.de/en/castdon-resin/, Accessed: March 5, 2018.
• [31] Ivoclar Vivaden. ProBase Cold, http://www.ivoclarvivadent.com/en/p/all/products/removable-denture-prosthetics/materials-for-dentures/probase-cold, Accessed: March 5, 2018.
• [32] Schütz Dental GmbH. FuturAcryl 2000 liquid, heat-curing acrylic https://www.schuetz-dental.de/en/dental-lab/denture-acrylics/denture-acrylics/heat-curing-acrylics.1729/futuracryl-2000-liquid, Accessed: March 5, 2018.
• [33] Schütz Dental GmbH. FuturAcryl 2000 powder, heat-curing acrylic https://www.schuetz-dental.de/en/dental-lab/denture-acrylics/denture-acrylics/heat-curing-acrylics.1716/futuracryl-2000-powder-heat-curinh-acrylic, Accessed: March 5, 2018.
• [34] M. Pispili, A. Pissiotis, K. Michalakis, The Effect of Surface preparation of Acrylic Teeth, The European Journal of Prosthodontics and Restorative Dentisty 25 (2017) 209-218.
• [35] M. Muñoz, E. Reales, L. Prates, C. Volpato, Bond Strength Assessment Between Acrylic Teeth and Acrylic Resin Repairs: Effect of Different Surface Treatments, Odovtos – International Journal of Dental Sciences 18(2016) 109-124.
• [36] R.W.C. Chung, R.K.F. Clark, B.W. Darvell, The bonding of cold-cured acrylic resin to acrylic denture teeth, Australian Dental Journal 40 (1995) 241-245.
• [37] R. Consani, H. Naoe, M. Mesquita, M. Sinhoreti, W. Mendes, Effect of Ridge-lap Surface Treatments on the Bond of Resin Teeth to Denture Base, The Journal of Adhesive Dentistry 13 (2011) 287-293.
• [38] A.A.Adeyemi, M.F. Lyons, D.A. Cameron, The acrylic tooth-denture base bond: effect of mechanical preparation and surface treatment, The European Journal of Prosthodontics and Restorative Dentisty 15 (2007) 108-114.
• [39] L.E. Bragaglia, L.H.M. Prates, M.C.M. Calvo, The role of surface treatments on the bond between acrylic denture base and teeth, Brazilian Dental Journal 20 (2009) 156-161.
• [40] K.-H. Chung, C.Y. Chung, C.Y. Chung, D.C.N. Chan, Effect of pre-processing surface treatments of acrylic teeth on bonding to the denture base, Journal of Oral Rehabilitation 35 (2008) 268-275.
• [41] H. Akin, O. Kirmali, F. Tugut, M.E. Coskun, Effects of Different Surface Treatments on the Bond Strength of Acrylic Denture Teeth to Polymethylmethacrylate Denture Base Material, Photomedicine and Laser Surgery 32 (2014) 512-516.
• [42] M. Malkoç, A. Ögreten, A.N. Ozturk, N. Demir, H. Kiliç, Effect of new laser type on shear bond strength of acrylic teeth to denture base, Journal of Restorative Dentistry 3 (2015) 26-30.
• [43] H. Akin, F. Tugut, U. Guney, T. Akar, Shear Bond Strength of Denture Teeth to Two Chemically Different Denture Base Resins after Various Surface Treatments, Journal of Prosthodontics 23 (2014) 152-156.
• [44] R. Mosharraf, M. Abed-Haghighi, A comparison of acrylic and multilithhic teeth bond strengths to acrylic denture base material, The Journal of Contemporary Dental Practice 10/5 (2009) E017-24.
• [45] H.S. Cardash, B. Applebaum, H. Baharav, R. Liberman, Effect of retention grooves on teeth-denture base bond, The Journal of Prosthetic Dentistry 64 (1990) 492-496.

Uwagi

PL

Opracowanie rekordu w ramach umowy 509/P-DUN/2018 ze środków MNiSW przeznaczonych na działalność upowszechniającą naukę (2019).