PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Nowoczesne konstrukcje kolektorów słonecznych

Autorzy
Wybrane pełne teksty z tego czasopisma
Identyfikatory
Warianty tytułu
EN
Modern constructions of solar energy collectors
Języki publikacji
PL
Abstrakty
PL
W artykule przedstawiono nowe, prototypowe konstrukcje kolektorów słonecznych żaluzjowych i kolektorów z rurkami cieplnymi, testowanych obecnie i wprowadzanych do stosowania w Portugalii. Omówiono wyniki przeprowadzonych na Uniwersytecie w Porto badań eksperymentalnych i symulacyjnych. Wykorzystano materiały wyszczególnione w literaturze i własne, udostępnione autorce w czasie pobytu na Uniwersytecie w Porto (Faculdade de Engenharia, Departamento de Engenharia Mecánica e Gestao Industrial) w ramach działalności Centrum ENER-INDOOR. ENER-INDOOR - Centrum Energetycznie Efektywnych Technik i Systemów w Inżynierii Środowiska Wewnętrznego zostało utworzone 1.03.2003 r w ramach finansowanego przez Komisję Europejską 5. Programu Ramowego przy Katedrze Ogrzewnictwa, Wentylacji i Techniki Odpylania (KOWiTO) Politechniki Śląskiej w Gliwicach (http://www. ener-indoor. pl). Celem działania Centrum jest upowszechnianie w kraju wiedzy o nowoczesnych i efektywnych energetycznie rozwiązaniach w dziedzinie ogrzewnictwa, wentylacji i klimatyzacji oraz skutecznego projektowania i użytkowania instalacji. Głównym zainteresowaniem objęte są odnawialne źródła energii i programy zintegrowanej symulacji.
EN
The paper presents new prototype constructions of a solar louvre collector and a plate heat pipe solar collector. Such kinds of collectors are presently being tested and brought into use in Portugal. The results of tests and numerical simulations are presented too. The paper was written on the basis of the papers listed in the references, as well as on the information gathered by the author during visit at the University of Porto (Faculdade de Engenharia, Departamento de Engenharia Mecánica e Gestao Industrial) as the member of the ENER-INDOOR Centre. The ENER-INDOOR - Centre for Energy Efficient Technologies and Systems in Indoor Environment Engineering is a “Centre of Excellence” type project financed by the European Commission under its Fifth Framework Programme. The Centre established on 1 st January 2003 conducts its activity basing on the research staff of the Chair of Heating, Ventilation and Dust Removal Technology (KOWiTO) of the Faculty of Energy and Environmental Engineering of the Silesian University of Technology in Gliwice (http://www.ener-indoor.pl). The mission of the Centre is to stimulate the presence of and to disseminate in Poland the knowledge related to applying techniques for the efficient acquisition and use of energy and efficient designing and exploitation of relevant installations for the purposes of heating, ventilation and air conditioning. Particular empnasis is put on renewable energy sources and on the integrated simulation programs.
Czasopismo
Rocznik
Tom
Strony
36--39
Opis fizyczny
Bibliogr. 7 poz., rys., tab.
Twórcy
autor
  • Centrum Energetyczne Efektywnych Technik i Systemów w Inżynierii Środowiska Wewnętrznego ENER-INDOOR
  • Katedra Ogrzewnictwa, Wentylacji i Techniki Odpylania Politechnika Śląska, Gliwice
Bibliografia
  • 1. Facao J., Oliveira A. C.: Analysis of a plate heat pipe solar collector. International Conference on Sustainable Energy Technologies, SET 2004, Nottingham, 2004.
  • 2. Palmero A. M., Oliveira A. C.: Numerical simulation of an integrated solar louvre collector system, Sustainable Energy Technologies, Book of Proceedings of da Conferencia SET 2002, pp. -, 2002.
  • 3. Palmero-Marrero A. M., Oliveira A. C.: Testing of an integrated solar louvre collector, International Journal Ambient Energy, vol 25. nr 4, Oct. 2004, Ambient Press Limited, UK.
  • 4. Palmero A., Oliveira A. C.: Numerical simulation of an integrated solar louvre collector system. International Journal Ambient Energy, vol 24. nr 1, 2003, Ambient Press Limited, UK.
  • 5. Solar Louvre Project ENK6-CT2000-0330.
  • 6. ASHRAE Standard 93-77, 1977.
  • 7. Bienert W. B., Wolf D. A.: Heat pipes in flat plate solar collectors, ASME paper, No 76-WA/Sol-12, 1976.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-7769cdff-db19-42fb-8b93-36dba183e126
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.