Tytuł artykułu
Treść / Zawartość
Pełne teksty:
Identyfikatory
Warianty tytułu
Języki publikacji
Abstrakty
Recently, the use of electrolyzers for hydrogen production through water electrolysis is of great interest in the industrial field to replace current hydrogen production pathways based on fossil fuels (e.g. oil, coal). The electrolyzers must be supplied with a very low DC voltage in order to produce hydrogen from the deionized water. For this reason, DC-DC step-down converters are generally used. However, these topologies present several drawbacks from output current ripple and voltage gain point of view. In order to meet these expectations, interleaved DC-DC step-down converters are considered as promising and interesting candidates to supply proton exchange membrane (PEM) electrolyzers. Indeed, these converters offer some advantages including output current ripple reduction and reliability in case of power switch failures. In addition, over the last decade, many improvements have been brought to these topologies with the aim to enhance their conversion gain. Hence, the main goal of this paper is to carry out a thorough state-of-the-art of different interleaved step-down DC-DC topologies featuring a high voltage gain, needed for PEM electrolyzer applications.
Wydawca
Rocznik
Tom
Strony
33--43
Opis fizyczny
Bibliogr. 18 poz., rys., tab.
Twórcy
autor
- Group of Research in Electrical Engineering of Nancy (GREEN), Université de Lorraine, 54500, Vandoeuvre-lès-Nancy, FRANCE
autor
- Group of Research in Electrical Engineering of Nancy (GREEN), Université de Lorraine, 54500, Vandoeuvre-lès-Nancy, FRANCE
autor
- Group of Research in Electrical Engineering of Nancy (GREEN), Université de Lorraine, 54500, Vandoeuvre-lès-Nancy, FRANCE
Bibliografia
- [1] T.S. Uyar, D. Beşikci, Integration of hydrogen energy systems into renewable energy systems for better design of 100% renewable energy communities, International Journal of Hydrogen Energy, Vol. 42, Iss. 4, 2017, pp. 2453-2456.
- [2] M. Carmo, D.L. Fritz, J. Mergel, D. Stolten, A comprehensive review on PEM water electrolysis, International Journal of Hydrogen Energy, Volume 38, Issue 12, 2013, Pages 4901-4934.
- [3] Alexander Buttler, Hartmut Spliethoff, Current status of water electrolysis for energy storage, grid balancing and sector coupling via power-to-gas and power-to-liquids: A review, Renewable and Sustainable Energy Reviews, Volume 82, Part 3, 2018, Pages 2440-2454.
- [4] D. Guilbert, S.M. Collura, A. Scipioni, DC/DC converter topologies for electrolyzers: State-of-the-art and remaining key issues, International Journal of Hydrogen Energy, Volume 42, Issue 38, 2017, Pages 23966-23985.
- [5] M.E. Sahin, H.I. Okumus‚ M.T. Aydemir, “Implementation of an electrolysis system with DC/DC synchronous buck converter“, International Journal of Hydrogen Energy, vol. 39, iss. 13, p. 6802-6812, 2014.
- [6] T. Zhou, B. François, M. El Hadi Lebbal, S. Lecoeuche, “Real-time emulation of a hydrogen-production process for assessment of an active wind-energy conversion system“, IEEE Transactions on Industrial Electronics, vol. 56, iss. 3, p. 737-746, 2009.
- [7] P. Thounthong, B. Davat, “Study of a multiphase interleaved step-up converter for fuel cell high power applications“, Energy Conversion and Management, vol. 51, iss. 4, p. 826-832, 2010.
- [8] A. Kolli, A. Gaillard, A. De Bernardinis, O. Bethoux, D. Hissel, Z. Khatir, “A review on DC/DC converter architectures for power fuel cell applications“, Energy Conversion and Management, vol. 105, p. 716-730, 2015.
- [9] Yaow-Ming Chen, Sheng-Yu Tseng, Cheng-Tao Tsai and Tsai-Fu Wu, “Interleaved buck converters with a single-capacitor turn-off snubber”, IEEE Transactions on Aerospace and Electronic Systems, vol. 40, no. 3, pp. 954-967, July 2004.
- [10] K. Yao, Y. Qiu, M. Xu and F.C. Lee, “A novel winding-coupled buck converter for high-frequency, high-step-down DC-DC conversion“, IEEE Transactions on Power Electronics, vol. 20, iss. 5, p. 1017-1024, 2005.
- [11] M. Ilic, B. Hesterman and D. Maksimovic, “Interleaved zero current transition three-level buck converter”, in: proceedings of Twenty-First Annual IEEE Applied Power Electronics Conference and Exposition, p. 72-78, 2006.
- [12] M. Ilic and D. Maksimovic, “Interleaved Zero-Current-Transition Buck Converter”, IEEE Transactions on Industry Applications, vol. 43, no. 6, pp. 1619-1627, 2007.
- [13] J. Wibben and R. Harjani, “A High-Efficiency DC–DC Converter Using 2 nH Integrated Inductors”, IEEE Journal of Solid-State Circuits, vol. 43, no. 4, pp. 844-854, 2008.
- [14] W. Li and X. He, “A Family of Interleaved DC–DC Converters Deduced From a Basic Cell With Winding-Cross-Coupled Inductors (WCCIs) for High Step-Up or Step-Down Conversions”, IEEE Transactions on Power Electronics, vol. 23, no. 4, pp. 1791-1801, 2008.
- [15] C.T. Tsai and C.L. Shen, “Interleaved soft-switching coupled-buck converter with active-clamp circuits“, in: Proceedings of 2009 International Conference on Power Electronics and Drive Systems (PEDS), p. 1113-1118, 2009.
- [16] I. Lee, S. Cho and G. Moon, “Interleaved Buck Converter Having Low Switching Losses and Improved Step-Down Conversion Ratio,” in IEEE Transactions on Power Electronics, vol. 27, no. 8, pp. 3664-3675, Aug. 2012.
- [17] D. Guilbert, B. Yodwong, W. Kaewmanee, P. Phattanasak, Power converters for hybrid renewable energy systems with hydrogen buffer storage: A short review, in: Proceedings of 6th International Conference on Smart Grid (IEEE ICSMARTGRID), 2018, forthcoming.
- [18] T. Arunkumari, V. Indragandhi, An overview of high voltage conversion ratio DC-DC converter configurations used in DC micro-grid architectures, Renewable and Sustainable Energy Reviews, Volume 77, 2017, Pages 670-687.
Uwagi
Opracowanie rekordu w ramach umowy 509/P-DUN/2018 ze środków MNiSW przeznaczonych na działalność upowszechniającą naukę (2019).
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-76efa133-a9fe-4849-a3ca-cb86c907fe28