Effect of eco-friendly digital printing on the fastness properties of single jersey knitted fabrics

• Autorzy: Kadem Füsun Doba , Özdemir Şehpal

Identyfikatory

DOI

10.2478/ftee-2023-0048

• Języki publikacji: EN

Abstrakty

EN

In this study, single jersey knitted fabrics were produced from 100 % Ne 12/1 cotton, 100 % Ne 30/1 cotton, Ne 12/1 70% cotton + 30% hemp, Ne 30/1 50% modal + 50 % cotton, Ne 30/1 100 % viscose, and Ne 30/1 50 % viscose + 50 % cotton. The raw materials were bleached and singed, after which reactive pretreatment paste recipes were padded onto the fabrics, and then colored with digital printing. Fastness analyses and spectrophotometric color measurements were applied to the samples. When the results were determined, it was obviously seen that the washing, ironing, and rubbing fastness are of very high degrees because reactive dyestuffs make covalent bonds with the fibers. Thus, the increase in the amount of thickener also increased the bonding and provided better adhesion of the color.

Słowa kluczowe

EN

digital printing; ironing; hemp fibre; rubbing fastness; thickener; CMYK

• Wydawca: Sieć Badawcza Łukasiewicz - Łódzki Instytut Technologiczny
• Czasopismo: Fibres & Textiles in Eastern Europe
• Rocznik: 2023
• Tom: Vol. 31, no. 5
• Strony: 86--98
• Opis fizyczny: Bibliogr. 21 poz., rys., tab.

Twórcy

autor

Kadem Füsun Doba

• Çukurova University Faculty of Engineering, Sarıçam, Adana Turkey

autor

Özdemir Şehpal

• Çukurova University Faculty of Engineering, Sarıçam, Adana Turkey

Bibliografia

• 1. Basit, A., Latif, W., Baig, S., Rehman, A., Hashim, M., Zia-ur Rehman, M., The mechanical and comfort properties of viscose with cotton and regenerated fibers blended woven fabrics, Materials Science, 2018; 24(2): 230-235.
• 2. Ujiie, H., Digital Printing of Textiles Woodhead Publishing Limited; 2006.
• 3. Özgüney, A.T, Erdem İsmal, O., Textile Digital (Ink Jet) Printing Technology: Basic Principles and Development Process, Izmir: Turkish Textile Foundation Press, ISBN: 975-922190X ;2003.
• 4. Selçuk, E., Ink jet baskıda kumaşa uygulanan ön işlemlerin baskı kalitesi üzerine etkilerinin araştırılması (in Turkish), Master’s thesis, Department of Textile Engineering, Uludağ University, 2009.
• 5. Malik, S.K., Kadian, S., Kumar, S., Advances in ink-jet printing technology of textiles, Indian J Fibre Text, 2005; 30(1): 99–113.
• 6. Soleimani-Gorgani, A., Shakib, N., Single-phase ink-jet printing onto cotton fabric, Coloration technology, 2013; 129: 109-113.
• 7. Kibria, Md G., Rahman, F., Chowdhury, D., Uddin, Nasir, Md., Effects of printing with different thickeners on cotton fabric with reactive dyes, IOSR Journal of Polymer and Textile Engineering 2018; 5 (1): 5-10.
• 8. Özdemir, Ş., Doba Kadem, F., An investigation of the effect of post-processing on selected properties of digital printed fabrics. Paper presented at: APSB 2019. Proceedings of the EURO ASIA 5th. International Congress On Applied Sciences Nov 15-17; Adana, Turkey; 2019; 685-693.
• 9. Özdemir, Ş., Doba Kadem, F., An experimental study on drying behavior in digital printed fabrics, Dokuz Eylül Üniversitesi Mühendislik Fakültesi Fen ve Mühendislik Dergisi DEU FMD, 2019; 21 (63), 927-932.
• 10. Mohsin, M., Sardar, S., Shehzad, K., Anam, W., Iqbal, M., Performance enhancement of the digital printed cotton fabric through ecofriendly finishes, Journal of Natural Fibers. DOI:10.1080/15440478.2021.1958430, 2021; 19 (14), 7996-8005.
• 11. Özdemir, Ş., Doba Kadem, F., Investıgation of bursting strength of digital printed single jersey knitted fabrics, 9 International Congress on Engineering, Architecture and Design Proceedings Book, 2022; ISBN:978-625-7367-47-9, p: 882-894
• 12. Özdemir, Ş., Doba Kadem, F., Farklı hammaddeden üretilmiş dijital baskılı örme kumaşların ütü haslığı ve spektrofotometrik renk değerlendirmesi (in Turkish), National Çukurova Textile Congress Proceedings Book - UÇTEK 2022, 2022; e-ISBN 978-975-487-229-3, p.324-333.
• 13. Özdemir, Ş., Doba Kadem, F., An eco-friendly approach: effect of fixation time on colour and comfort properties of digital printed fabric, Industria Textila, 2023; 74 (5), 527-533.
• 14. Yeo, Y., Shin, Y., Inkjet Printing of Textiles Using Biodegradable Natural Dyes, Fibers and Polymers, 2023; 24: 1695–1705, https://doi.org/10.1007/s12221-023-00162-3.
• 15. TS EN 14971:2006 Textiles - Knitted fabrics - Determination of number of stitches per unit length and unit area
• 16. TS 7128 EN ISO 5084 Textiles-Determination of thickness of textiles and textile products
• 17. TS 251 Determination of Mass Per Unit Length and Mass Per Unit Area of Woven Fabrics
• 18. ISO 105-X11 Textiles- Tests for colour fastness Part X11:Colour fastness to hot pressing
• 19. ISO 105 X12:2006 Textiles - Tests for colour fastness - Part X12: Colour fastness to rubbing
• 20. ISO 105-C06 A2S: 2010 Textiles—Tests for colour fastness—Part C06: Colour fastness to domestic and commercial laundering
• 21. Kasikovic, D.N., Vladić, G., Klančnik, M., Journal Of Graphic Engineering and Design, 2011; 2(1), 24.