Analysis the Influence of Steel Sheet Production Technology on the Quality Products in Steel Service Polska

• Autorzy: Sitko Jacek

Identyfikatory

DOI

10.2478/mape-2021-0027

• Języki publikacji: EN

Abstrakty

EN

The process of production and processing and preparation for distribution of steel products is associated with the requirements of maintaining appropriate procedures. They allow, in accordance with industry standards to avoid unforeseen problems associated with the preparation, implementation and finalization of activities aimed at achieving the intended purpose, which is a finished product of adequate quality and customer satisfaction. It is not always possible in the production process to meet all the requirements and technological, organizational and human factor recommendations. The analysis of selected problems, which includes the content of the article allows to significantly determine the factors and parameters associated with the preparation and technical implementation affecting the implementation of the intended objectives of the company, i.e. achieving an appropriate level of quality and minimizing the defects in the process of steel sheet preparation. Analysis of selected parameters was made on the basis of data obtained in the company operating on the international market Company Steel Service Poland. At the request of company representatives, the name has been changed due to the production data used in the article, which may be considered as sensitive. The article contains data based on research carried out in Steel Service Poland. Selected problems are the subject of analysis of steel sheets cutting processes with the analysis of causes of customer complaints with reference to the produced steel products. Selected steel grades and factors affecting the efficiency of the technological process are presented. The analysed set of factors translates into the level of product quality and reduction of arising defects.

Słowa kluczowe

EN

production; material; steel; quality; defects

• Wydawca: STE GROUP ; De Gruyter
• Czasopismo: Multidisciplinary Aspects of Production Engineering
• Rocznik: 2021
• Tom: Vol. 4, Iss. 1
• Strony: 301--308
• Opis fizyczny: Bibliogr. 19 poz., fig., tab.

Twórcy

autor

Sitko Jacek

• Silesian University of Technology, Poland

• https://orcid.org/0000-0002-7214-2046

Bibliografia

• 1. Brodny, J. and Tutak, M. (2016). Analysis of gases emitted into the atmosphere during an endogenous fire. Proceedings of 16th International Multidisciplinary Scientific GeoConference SGEM 2016, pp. 75-82. DOI: 10.5593/SGEM2016/HB43/S06.011.
• 2. Brodny, J. and Tutak, M. (2018). Determination of the Zone with a Particularly High Risk of Endogenous Fires in the Goaves of a Longwall with Caving. Journal of Applied Fluid Mechanics, 1(3), pp. 545-553. DOI:10.18869/acadpub.jafm.73.246.27240.
• 3. Biały, W., Wedzicha. J. and Nordin V. (2018). Masurement of Weldings Incompatibility in Constructions. Multidisciplinary Aspects of Production Engineering, 1, pp. 117-128.
• 4. Biały, W. (2017). Application of quality management tools for evaluating the failure frequency of cutter-loader and plough mining systems. Archives of Minning Sciences, Volume 62, issue 2, 2017. pp. 243-252. ISSN 0860-7001. DOI 10.1515/amsc-2017-0018.
• 5. Bołoz, Ł., Midor, K. (2018). Process innovations in mining industry and effects of their implementation presented on example of longwall milling heads, Acta Montanistica Slovaca, 23(3), pp. 282-292.
• 6. Fretsch, M. (2003). Logistyka produkcji, wyd. ILiM, Poznań.
• 7. Górniak, A., Midor, K., Kaźmierczak, J. and Kaniak, W. (2018). Advantages and disatvantages of using methane from CNG in motor vehicles in polish engine. Masurement of Weldings Incompatibility in Constructions. Multidisciplinary Aspects of Production Engineering, 1, pp. 241-247.
• 8. Gajdzik, B., and Sitko, J. (2014). An analysis of the causes of complaints about steel sheets in metallurgical product quality management systems. Metalurgija 53(1) pp. 135-138.
• 9. Gajdzik, B. (2013). World class manufacturing in metallurgical enterprise. Metalurgija 52(1) pp. 131-134.
• 10. Hąbek, P. (2014). Evaluation of sustainability reporting practices in Poland.
• 11. Mazurkiewicz, J. and Szymszal, J. and Ścierski, J. (2003). Podstawy technologii przetwórstwa metali, Wyd. Pol. Śl. Gliwice.
• 12. Praca zbiorowa. Poradnik inżyniera. Mechanika, t. 3, WNT, Warszawa 1970.
• 13. Skowronek, Cz. (1989). Gospodarka materiałowa w samodzielnym przedsiębiorstwie, PWE, Warszawa.
• 14. Sitko, J., Mikuś, R. and Bożek, P. (2018). Analysis of device failure in the mechanical production plant. Masurement of Weldings Incompatibility in Constructions. Multidisciplinary Aspects of Production Engineering,1. pp. 93-99.
• 15. Sitko, J. (2007). The analysis influence of elements the processing on quality of products. Archives of Foundry Engineering. July 2007. Vol. 7.
• 16. Pfohl, H. (1998). Systemy logistyczne. Podstawy organizacji i zarządzania, ILiM, Poznań.
• 17. Lis T.: Współczesne metody otrzymywania stali. Wyd. Pol. Śl., Gliwice 2000.
• 18. Lysons, K. (2004). Zakupy zaopatrzeniowe, PWE, Warszawa.
• 19. Urbaniak, M. (2004). Zarządzanie Jakością. Teoria i Praktyka. Wydawnictwo Difin. Warszawa.

Uwagi

The article was written in support of BK-273/ROZ3/2021 (13/030/BK_21/0065) research under the title "Department of Production Engineering’ resources development for carrying out activities in the areas related to the Silesian University of Technology Priority Research Areas”.

Opracowanie rekordu ze środków MEiN, umowa nr SONP/SP/546092/2022 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2022-2023).