PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Enhanced Oil Recovery methods on offshore fields in the light of world literature

Autorzy
Treść / Zawartość
Identyfikatory
Warianty tytułu
Języki publikacji
EN
Abstrakty
EN
Enhanced Oil Recovery methods (EOR) are known since long time, but in recent years they have been used primarily in the U.S. mostly for research purposes. The increased interest in their use was in the 70's of the twentieth century, and associated with the increase in oil prices. Currently for several years there has been a return to the these methods, including offshore fields. Experience in the application of EOR methods in Poland is small, currently no exploitation is carried out using them. The purpose of this article is to present the current trends and latest technologies in enhanced oil recovery methods in terms of the applicability by the Polish oil companies. Statistical data of current and planned EOR methods in the world with special emphasis on offshore reservoirs is presented. Current trends in technological development of EOR methods are given, both which are still in the phase of laboratory tests and the first tests on fields such as: carbon dioxide flooding, water alternating gas injection, Iow salinity water injection, carbonated water injection, conventional technologies of polymer gels and thermally activated polymers.
Słowa kluczowe
Rocznik
Strony
215--229
Opis fizyczny
Bibliogr. 26 poz., rys., tab.
Twórcy
autor
  • AGH University of Science and Technology, Faculty of Drilling, Oil and Gas, Kraków, Poland
autor
  • AGH University of Science and Technology, Faculty of Drilling, Oil and Gas, Kraków, Poland
Bibliografia
  • [1] Al Adasani Ahmad, Baojun Bai, Analysis of EOR projects and updated screening criteria, Journal of Petroleum Science and Engineering 79 (2011) 10-24, 2011
  • [2] Aleidan A., Mamora D.D., SWACO2 and WACO2 Efficiency Improvement inCarbonate Cores by Lowering Water Salinity, CSUG/SPE, 2010
  • [3] Al-Ghanim W.R., GharbiRidha, AlgharaibMeshal, Designing a Simultaneous Water Alternating Gas Process for Optimizing Oil Recovery, SPE 120375, 2009
  • [4] Alvarado Vladimir, Manriąue Eduardo, Engineering Design Challenges and Opportunities beyond Waterflooding in Offshore Reservoirs, OTC 24105, Houston USA, 6-9 May, 2013
  • [5] ARI, Optimization of CO2 Storage in CO2 enhanced Oil Recovery Projects, Advanced Resources International (ARI) USA and Melzer Consulting USA, November 2010
  • [6] Austad T., RezaeirDoustAilreza, Puntervold Tina, Chemical Mechanism of Low Salinity Water Flooding in Sandstone Reservoirs, SPE 129767, 2010
  • [7] Awan A.R., Teogland R., Kleppe J., A Survey of North Sea Enhanced Oil Recovery Projects Initiated During the Years 1975 to 2005, SPE 99546, 2008
  • [8] DiPietro Phil, Carbon Dioxide Enhanced Oil Recovery in the United States: Snapshot and Forecast, Co2 Enhanced Oil Recovery - Operations In The Permian Basin Conference, March 25-26, 2013.
  • [9] Enick R.M., Olsen D., Ammer J., Schuller W., mobility and Conformance control for CO2 EOr via Thickeners, foams, and Gels - A literature review of 40 Years of Research and Pilot Tests, SPE 154122, 2012
  • [10] FactPages, Field Producing, http://factpages.npd.no, 2013 [
  • 11] Forrest J.K., Hussain A., Orozco M, Bourge J.P, Bui T., Henson R., Jalaludin I, Samarang Field - Seismic To Simulation redevelopment Evaluation Brings new Life to an Old OMeld, Offshore Sabah, Malaysia, SPE 13162, 2009
  • [12] Greenwald Judi, A Diverse Coalition Recommends Incentives to Accelerate Commercial Deployment of EOR Using Captured CO2, CCUS Forum, April 5, 2012.
  • [13] Hirasaki G.J., Miler, CA., Pope Gary A., Surfactant Based Enhanced Oil Recovery and Foam Mobility Control, 3nd Annual Technical Report, February 2006
  • [14] Hughes David, Law Stuart, Pitt Gemma, Low Salinity EOR "State of Play", Final raport conducted for DECC, Senergy, September2012
  • [15] Jackson Geoffre, Carbonated Water Flooding, Carbon Dioxide Management for EOR Workshop, Kuwait, Mai 14-15, 2007.
  • [16] Kechut Nor Idah, SohrabiMehran, JamiolahmadyMahmoud,Experimental and Numerical Evaluation of Carboanted Water Injection (CWI) for Improved Oil Recovery and CO2 Storage, SPE 143005, 2011Kottungal Lena, "2012 worldwideEOR survey", http://www.ogj.com, 2013
  • [17] Lager A., Webb K.J., Collins I.R., Richmond D.M., LoSal Enhanced Oil Recovery: Evidence of Enhanced Oil Recovery at the Reservoir Scale, SPE 113976, 2008
  • [18] Nader Mosavat and FarshidTorabi, Performance of Secondary Carbonated Water Injection in Light Oil Systems, Ind. Eng. Chem. Res., 2013
  • [19] Risbakk Jan Kare, Sy nopsis on Enhanced Oil Recovery, PGNiG Upstream International AS, unpublished, 2013
  • [20] Rogers JohnD., Grigg Reid B., Aliterature Analy sis of the WAG Injectivity Abnormalities in the CO2 Process, SPE Reservoir Evaluation & Engineering, October 2001 [21] Roussennac Brano, ToschiCelso, Brightwater® Trial in Salema Field (Campos Basin, Brazil), SPE 131299,2010
  • [21] Roussennac Brano, ToschiCelso, Brightwater® Trial in Salema Field (Campos Basin, Brazil), SPE 131299,2010
  • [22] Rychlicki Stanisław, Możliwości zwiększenia efektywności wydobycia ropy naftowej ze złóż karpackich, Wydawnictwo AGH, Kraków 2010
  • [23] SohrabiMehran, RiaziMasoud, Jamiolahmady Mahmoud, Brown Christopher, Enhanced Oil Recovery and CO2 Storage by Carbonated Water Injection, IPTC, Doha 7-9 December 2009.
  • [24] TalebianSeydeh H., Masoudi Rahim, Tan Isa M, ZithaPacelli, Foam assisted CO2-EOR; Concepts, Challenges and Applications, SPE 165280, 2013
  • [25] Tang, Guo-Qing, Morrow NormanR., Influence ofbrine composition and fines migra-tion on crade oil/brine/rock interactions and oil recovery, Elsevier, 1999
  • [26] Zhang, Y, Morrow, N.R., Comparison of Secondary and Tertiary Recovery with Change in Injection Brine Composition for Crade Oil/Sandstone Combinations, SPE 99757, 2006
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-75ba0ae4-2eeb-4361-9d5b-8471d7fe0393
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.