Computer- Aided Design of Steel Casting Taking into Account the Feeding Ability

• Autorzy: Polyakov S. , Kuzyi O. , Korotschenko A. , Korovin V. , Bast J.

Identyfikatory

DOI

10.1515/afe-2016-0002

• Języki publikacji: EN

Abstrakty

EN

A new Computer-Aided Design approach is introduced for design of steel castings taking into account the feeding ability in sand moulds. This approach uses the geometrical modeling by a CAD-program, in which the modul “Castdesigner” is implemented, which includes the feeding models of steel castings. Furthermore, the feeding ability is guaranteed immediately during the design by an interactive geometry change of the casting cross section, so that a directional feeding of the solidifying casting from the installed risers is assured.

Słowa kluczowe

EN

computer-aided design; casting; solidification; cast designer; freeCAD; feeding ability; riser

PL

projektowanie wspomagane komputerowo; odlew; krzepnięcie

• Wydawca: Komisja Odlewnictwa Polskiej Akademii Nauk Oddział w Katowicach
• Czasopismo: Archives of Foundry Engineering
• Rocznik: 2016
• Tom: Vol. 16, iss. 1
• Strony: 49--54
• Opis fizyczny: Bibliogr. 14 poz., il., rys.

Twórcy

autor

Polyakov S.

• Freiberg, TU Bergakademie Freiberg, Germany

autor

Kuzyi O.

• Moscow, TU Bauman, Russia

autor

Korotschenko A.

• Moscow, TU Bauman, Russia

autor

Korovin V.

• Moscow, TU Bauman, Russia

autor

Bast J.

• Freiberg, TU Bergakademie Freiberg, Germany

Bibliografia

• [1] Groem-Grzjimajlo, V.J. (1933). Steelmaking, Moscow, p. 408.
• [2] Heuvers, A. (1943). Giesstechnik, Die Giesserei, Vol. 30, 201.
• [3] Chvorinov, N. (1940). Giesserei, 27, 177-186.
• [4] Pellini W.S. (1953). Trans. AFS,. Vol 61, 61-80.
• [5] Namur, R. (1958). Giesserei Technisch-Wissenschaftlich Beihefte, N. 20, 1077-1087.
• [6] Balandin, G.F., Tschebotarev, A.S. & Tschikunov, J.M. (1976). Casting, 21-23 (russ.).
• [7] Polaykov, S. N. (1985). Casting, N. 11, 7-9. (russ.).
• [8] Polyakov,S.N. (1989). Casting, N. 10, 18-19. (russ.).
• [9] Hartmann, R., Poliakov, S., Popkov, V. & Martin A. (1998). Konstruieren+Giessen 23, 4.
• [10] Korovin, V.M., Polyakov, S.N., Korotchenko, A.J., Poly-akov, D.S. & Bast J. (2012). Russ., Foundryman 2. 29-35 (russ.).
• [11] Tschebotarev, A.S., Tschikunov, J.M., Sladkova, L.A., Porozkov V.N. http://www.ruscastings.ru/work/168/2130/2984/6312.
• [12] http://en.wikipedia.org/wiki/Medial_axis
• [13] http://en.wikipedia.org/wiki/Delaunay_triangulation
• [14] http://en.wikipedia.org/wiki/Voronoi_diagram

Uwagi

PL

Opracowanie ze środków MNiSW w ramach umowy 812/P-DUN/2016 na działalność upowszechniającą naukę.