Micro-bending sensor made from polydimethylsiloxane

• Autorzy: Novak Martin , Jargus Jan , Nedoma Jan , Vasinek Vladimir , Martinek Radek , Stolarik Martin

Identyfikatory

DOI

10.15199/48.2019.06.02

Warianty tytułu

PL

Mikroczujnik ugięcia wykonany z polydimethylsiloxanu

• Języki publikacji: EN

Abstrakty

EN

The article describes the process of manufacturing micro-bending sensors from polydimethylsiloxane and the checking of their function on the basis of damping behaviour. We tested three manufactured alternatives and from the results we determined coefficients for the calculation of the mass of weight on the assumption that the level of damping is known. We also tested the micro-bending sensors in practice as a walking detector, we can imagine similar uses for the sensor because it is compact, reliable, simple to produce, resistant to unfavorable conditions and cheap.

PL

W artykule opisano konstrukcję czujnika ugięcia wykonanego z polydimethylsiloxanu. Zbadano trzy alternatywne konstrukcje i określono masę obliczeniowoą przy założeniu że poziom tłumienia jest znany. Zbadano też praktyczne zastosowanie czujnika jako detektora kroków.

Słowa kluczowe

EN

polydimethylsiloxane (PDMS); sensor; micro-bending; weight; pressure

PL

Polydimethylsiloxane; PDMS; czujnik kroków; miokroczujnik ugięcia

• Wydawca: Wydawnictwo SIGMA-NOT
• Czasopismo: Przegląd Elektrotechniczny
• Rocznik: 2019
• Tom: R. 95, nr 6
• Strony: 4--8
• Opis fizyczny: Bibliogr. 20 poz., rys., tab.

Twórcy

autor

Novak Martin

• VSB - Technical university of Ostrava, Faculty of Civil Engineering, Department of Department of Geotechnics and Underground Engineering, Ludvíka Podéště 1875/17, 708 33 Ostrava, Czech Republic

autor

Jargus Jan

• VSB - Technical university of Ostrava, Faculty of Civil Engineering, Department of Department of Geotechnics and Underground Engineering, Ludvíka Podéště 1875/17, 708 33 Ostrava, Czech Republic

autor

Nedoma Jan

• VSB - Technical university of Ostrava, Faculty of Civil Engineering, Department of Department of Geotechnics and Underground Engineering, Ludvíka Podéště 1875/17, 708 33 Ostrava, Czech Republic

autor

Vasinek Vladimir

• VSB - Technical university of Ostrava, Faculty of Civil Engineering, Department of Department of Geotechnics and Underground Engineering, Ludvíka Podéště 1875/17, 708 33 Ostrava, Czech Republic

autor

Martinek Radek

• VSB - Technical university of Ostrava, Faculty of Civil Engineering, Department of Department of Geotechnics and Underground Engineering, Ludvíka Podéště 1875/17, 708 33 Ostrava, Czech Republic

autor

Stolarik Martin

• VSB - Technical university of Ostrava, Faculty of Civil Engineering, Department of Department of Geotechnics and Underground Engineering, Ludvíka Podéště 1875/17, 708 33 Ostrava, Czech Republic

Bibliografia

• [1] I. D. Johnston, D. K. McCluskey, C. K. L. Tan, M. C. Tracey, “Mechanical characterization of bulk Sylgard 184 for microfluidics and microengineering,“ Journal of Micromechanics and Microengineering, vol. 24, art. no. 035017, 2014.
• [2] J. Jargus, et. al., “Detection of magnetic field with use of optical sensors,“ Proceedings of SPIE - The International Society for Optical Engineering, vol. 10654, art. no. 1065419, 2018.
• [3] J. Jargus, et. al., “Proceedings of SPIE - The International Society for Optical Engineering,“ vol. 10654, art. no. 1065418, 2018.
• [4] J. Jargus, et. al., “Analysis of using PDMS polymer as the sensors of the pressure or weight,“ Proceedings of SPIE - The International Society for Optical Engineering, vol. 10440, art. no. 104400J, 2017.
• [5] H. Gao, et. al., “Highly-sensitive optical fiber temperature sensors based on PDMS/silica hybrid fiber structures,“ Sensors and Actuators, A: Physical, vol. 284, pp. 22-27 , 2018.
• [6] Y. Li, et. al., “Optical hydrogen sensor based on PDMS-formed double-C type cavities with embedded Pt-loaded WO3/SiO2,“ Sensors and Actuators, B: Chemical, vol. 276, pp. 23-30, 2018.
• [7] J. Nedoma, et. al., Non-invasive fiber optic probe encapsulated into PolyDiMethylSiloxane for measuring respiratory and heart rate of the human body,” Advances in Electrical and Electronic Engineering, vol. 15, pp. 93-100, 2017.
• [8] M. Fajkus, et. al., “A non-invasive multichannel hybrid fiberoptic sensor system for vital sign monitoring,” Sensors (Switzerland), vol. 17, art. no. 111, 2017.
• [9] J. Nedoma, et. al., “Encapsulation of FBG sensor into the PDMS and its effect on spectral and temperature characteristics,” Advances in Electrical and Electronic Engineering, vol. 14, pp. 460-466, 2016.
• [10] J. Nedoma, M. Fajkus, V. Vasinek, “Influence of PDMS encapsulation on the sensitivity and frequency range of fiberoptic interferometer,” Proceedings of SPIE - The International Society for Optical Engineering, vol. 9994, art. no. 99940P, 2016.
• [11] M. Fajkus, J. Nedoma, P. Siska, V. Vasinek, “FBG sensor of breathing encapsulated into polydimethylsiloxane,” Proceedings of SPIE - The International Society for Optical Engineering, vol. 9994, art. no. 99940N, 2016.
• [12] C. Y. Chang, et. al., ” Flexible Localized Surface Plasmon Resonance Sensor with Metal–Insulator–Metal Nanodisks on PDMS Substrate,” Scientific Reports, vol. 8, art. no. 11812, 2018.
• [13] J. Vitasek, et. al., “Illumination and communication characteristics of white light created by laser excitation of YAG:Ce phosphor powders,” Optical Materials, vol. 83, pp. 131-137, 2018.
• [14] C. W. Sher, et. al., “Large-area, uniform white light LED source on a flexible substrate,” Optics Express, vol. 23, art. no. A1167A1178, 2015.
• [15] J. Jia, et. al., “Highly Elastic and Flexible Phosphor Film for Flexible LED Lighting and Display Applications,” Faguang Xuebao/Chinese Journal of Luminescence, vol. 39, pp. 14931502, 2017.
• [16] T. Güner, D. Köseoğlu, M. M. Demir, “Multilayer design of hybrid phosphor film for application in LEDs,” Optical Materials, vol. 60, pp. 422-430, 2016.
• [17] H. Y. Lin, et. al., “Large area lighting applications with organic dye embedded flexible film,” Proceedings of SPIE - The International Society for Optical Engineering, vol. 9383, art. no. 93830N, 2015.
• [18] Y. Li, P. Tao, R. W. Siegel, L. S. Schadler, “Multifunctional silicone nanocomposites for advanced LED encapsulation,“ Materials Research Society Symposium Proceedings, vol. 1547, pp. 161-166, 2013.
• [19] L. C. Chen, W. W. Lin, J. W. Chen, “Fabrication of GaN-Based White Light-Emitting Diodes on Yttrium Aluminum GarnetPolydimethylsiloxane Flexible Substrates,“ Advances in Materials Science and Engineering, vol. 2015, art. no. 537163, 2015.
• [20] S. W. Allison, F. Sabri, P. Parajuli, “Exploration of thin polymer films for phosphor thermometry,“ Advances in Technology to Support End User Mission - Proceedings of the 2016 Joint Conference/Symposium of the Society for Machinery Failure Prevention Technology and the International Society of Automation 2016, code 122447, 2016.

Uwagi

Opracowanie rekordu w ramach umowy 509/P-DUN/2018 ze środków MNiSW przeznaczonych na działalność upowszechniającą naukę (2019).