PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Modelling of work of the rotor-type blade pump with revolving stator

Treść / Zawartość
Identyfikatory
Warianty tytułu
Języki publikacji
EN
Abstrakty
EN
In the article, the analytical dependences of modelling the cell cross-sectional area between two adjacent blades of a rotary blade pump and capacity for a pump with fixed and rotating stators are given, and analytical dependences are derived to model the power necessary to overcome the friction forces of the blades. The forces acting on the radially placed blade of a rotary pump with a fixed stator (non-rotating or stationary) and a rotating stator are analyzed. Design and technological parameters that influence the pump capacity and power are taken into account. The power required for the movement of the pump blade without taking into account the compression of the air has the opposite character of the change as to the pump capacity The capacity of a rotary pump with a rotating stator is three times higher than that of a stationary stator. The rotary pump with a rotating stator, with six radially spaced blades, consumes 0.854 [kW] less power to overcome the blade friction of 1313 kW The results of modelling of the pump work are given.
Rocznik
Strony
17--28
Opis fizyczny
Bibliogr. 22 poz., wykr.
Twórcy
  • Lviv Polytechnic National University, Institute of Mechanical Engineering and Transport 1 Profesorska St., Lviv, 79013, UKRAINE
autor
  • Lviv Polytechnic National University, Institute of Mechanical Engineering and Transport 1 Profesorska St., Lviv, 79013, UKRAINE
  • Lviv Polytechnic National University, Institute of Mechanical Engineering and Transport 1 Profesorska St., Lviv, 79013, UKRAINE
  • Lviv National Agrarian University, Faculty of Mechanic and Power Engineering Lviv-Dubliany, 80381, UKRAINE
Bibliografia
  • [1] World Compressor Market (2017): Japanese Air Conditioning Heating and Refrigeration News.– March 25, pp.61-112.
  • [2] Monasry J.F., Aoki T., Shida S., Hatayama M., Hirayama T. and Okada M. (2018): Development of large capacity and high efficiency rotary compressor.– 24th International Compressor Engineering Conference at Purdue, July 9- 12, paper 2576. [online]. Available at. https://docs.lib.purdue.edu/icec/2576.
  • [3] Lim Yeu De, Poh Wai Chang and Ooi Kim Tiow. (2018): Leakage simulation of a lubricant-free rotary type swing compressor rotor endface clearance.– International Compressor Engineering Conference, paper 2612. [online]. Available at. https://docs.lib.purdue.edu/icec/2612.
  • [4] Soedel W. (2006): Sound and Vibrations of Positive Displacement Compressors.– CRC press, p.343.
  • [5] Tramschek A. B. and Ooi, K. (1992): Effects of port geometry, dimensions and position on the performance of a rotary compressor.– Paper presented at the International Compressor Engineering Conference, paper 912. [online]. Available at. http://docs.lib.purdue.edu/icec/912.
  • [6] Ma G.Y. and Li H.Q. (2001): Vane Compressor. Rotary Compressor (in Chinese).– BeiJing: China Machine Press, pp.92-183.
  • [7] Dmytriv V.T., Dmytriv I.V., Borovets V.M., Horodetskyy I.M., Kachmar R.Y. and Dmyterko P.R. (2019): Analytical experimental studies of delivery rate and volumetric efficiency of rotor-type vacuum pumps for milking machine.– INMATEH - Agricultural Engineering, vol.58, No.2, pp.57-62. DOI: 10.35633/INMATEH-58-06.
  • [8] Dmytriv V., Dmytriv I., Horodetskyy I. and Dmytriv T. (2019): Analytical dynamic model of coefficient of friction of air pipeline under pressure. – Diagnostyka, vol.20, No.4, pp.89-94. DOI: 10.29354/diag/114334.
  • [9] Mindaugas R. (2017): Vane friction and wear influence on rotary vane compressor efficiency and operation: research and analysis review.– Agricultural Engineering, Research Papers, Vol.49, pp.1-12.
  • [10] Wu J., Zhang L., Huang L. and Tang Y. (2004): Numerical simulation and performance analysis of rotary vane compressors for automotive air conditioner.– International Compressor Engineering Conference at Purdue, paper 124. [online]. Available at. https://docs.lib.purdue.edu/icec.
  • [11] Kong X.Z., Yang H.L. and Sun T.S. (2005): Study on the calculating model of power of vane compressor.– Fluid Machinery, vol.33, No.1, pp.25-27.
  • [12] Sarip A.R. and Musa M.N. (2012): Theoretical study of a novel multi vane rotary compressor.– International Compressor Engineering Conference at Purdue, paper 1307. [online]. Available at. https://docs.lib.purdue.edu/icec/2094.
  • [13] Kawamura R., Sekiya S., Sasaki T., Maeyama H., Takahashi S. and Sugiura K. (2016): A study on high efficiency wing-vane compressor, part 1: a simulation analysis of dynamic model.– 23 International Compressor Engineering Conference at Purdue, July 11-14, paper 1104. [online]. Available at. https://docs.lib.purdue.edu/icec/2408.
  • [14] Hu Y., Xu J., Wan P., Luo F., Wu F. and Ren L. (2018): A Study on novel high efficiency vane compressor.– 24 International Compressor Engineering Conference, July 9-12, paper 2601. [online]. Available at. https://docs.lib.purdue.edu/icec/2601.
  • [15] Costanzo I., Valenti G., Murgia S. and Baia F. (2018): Experimental investigation on a novel two-stage sliding-vane air compressor based on the intracooling concept.– 24 International Compressor Engineering Conference, July 9- 12, paper 2597. [online]. Available at. https://docs.lib.purdue.edu/icec/2597.
  • [16] Walicka A.and Jurczak P. (2017): Influence of total inertia effects in a thrust curvilinear bearing lubricated with newtonian lubricants.– Int. J. of Applied Mechanics and Engineering, vol.22, No.4, pp.1045-1058. DOI: 10.1515/ijame-2017-0067.
  • [17] Walicka A., Walicki E. and Jurczak P. (2019): Inertia effects in a multilobe conical bearing lubricated with a couple stress fluid.– Int. J. of Applied Mechanics and Engineering, vol.24, No.2, pp.439-451. DOI: 10.2478/ijame-2019-0027.
  • [18] Walicka A., Jurczak P. and Falicki J. (2017): Curvilinear squeeze film bearing lubricated with a DeHaven fluid or with similar fluids.– Int. J. of Applied Mechanics and Engineering, vol.22, No.3, pp.697-715. DOI: 10.1515/ijame2017-0044.
  • [19] Mohammed A., Nabil M., Ahmed El-Baz and Ashraf H. (2018): Flow modelling and performance assessment of rotary sliding vane pump using computational fluid dynamics.– Journal of Al Azhar University Engineering Sector, vol.13, No.49, pp.1268-1288. DOI: 10.21608/AUEJ.2018.18942.
  • [20] Cheng Y., Wang X., Chai H., Sun T., Shahzad H. and Rehman W. (2021): The theoretical performance analysis and numerical simulation of the cylindrical vane pump.– Arabian Journal for Science and Engineering, vol.46, pp.2947- 2961. DOI.org/10.1007/s13369-020-05294-9.
  • [21] Kolasinski P., Błasiak P. and Rak J. (2016): Experimental and numerical analyses on the rotary vane expander operating conditions in a micro organic rankine cycle system.– Energies, vol.9, No.8, p.606, DOI.org/10.3390/en9080606.
  • [22] Petrović R. (2009): Mathematical modeling and experimental verification of operating parameters of vane pump with double effect.– Strojniški vestnik - Journal of Mechanical Engineering, vol.55, No.1, pp.26-32.
Uwagi
PL
Opracowanie rekordu ze środków MEiN, umowa nr SONP/SP/546092/2022 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2022-2023)
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-75125800-23f7-4c1c-b8b1-5ff076027ec8
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.