Analysis of the possibility of integrating a mining right-angle planetary gearbox with technical diagnostics systems

• Autorzy: Wieczorek A. N.

Identyfikatory

DOI

10.20858/sjsutst.2016.93.16

• Języki publikacji: EN

Abstrakty

EN

A key factor enabling the achievement of the required capacity by longwall mining systems is to obtain a satisfactory service life for individual components of such systems. Such components include right-angle planetary gearboxes for armoured face conveyors. An increase in the service life of such equipment can be achieved by ensuring adequacy in terms of design, materials and organization. As a part of organizational changes, the use of individual diagnostics systems may have the greatest impact on the service life of mining gearboxes; however, their widespread implementation is limited by economic and operational barriers. This paper presents an analysis of the possibility of integrating mining gearboxes with electronic systems of technical diagnostics, as well as expanding the scope of the technical condition monitoring by the machines operating together with these gearboxes. As a result of the calculation and design work performed, it has been demonstrated that it is possible to integrate technical diagnostics systems with advanced data transmission capabilities inside gearboxes.

Słowa kluczowe

EN

mining; gear; vibration

PL

górnictwo; koło zębate; wibracja

• Wydawca: Wydawnictwo Politechniki Śląskiej
• Czasopismo: Zeszyty Naukowe. Transport / Politechnika Śląska
• Rocznik: 2016
• Tom: z. 93
• Strony: 149--163
• Opis fizyczny: Bibliogr. 8 poz.

Twórcy

autor

Wieczorek A. N.

• Faculty of Mining and Geology, Silesian University of Technology, Akademicka 2 Street, 44-100 Gliwice

Bibliografia

• 1. Antoni Dziama, Marek Michniewicz, Alfred Niedźwiedzki. 1989. Gearboxes. Warsaw: PWN. ISBN: 830-11-1643-9.
• 2. Gustav Niemann, Hans Winter. 1989. Machine Elements. Volume 2: Transmission Generally, Gears - Fundamentals, Spurgears. Berlin: Springer. ISBN: 978-3-662- 11873-3.
• 3. oanna Ćwirko, Robert Ćwirko. 2008. “Temperature tests of electronic modules”. Biuletyn WAT 47 (2): 133-142. ISSN: 1234-5865.
• 4. Ludwig Müller. 1996. Gears: Design. Warsaw: WNT. ISBN 83-204-1983-2.
• 5. Marek Dietrich (ed.). 1995. Fundamentals of Machine Design: Part III. Warsaw: WNT. ISBN: 978-83-7926-257-1.
• 6. P- 399189. Method and System of Cooling of the Teeth Gear. 16.05.2012.
• 7. P- 399187. Method for Cooling Electronic Systems in Mechanical Appliances, Especially in Teeth Gear. 2012.05.16.
• 8. P- 399185. Mechanical Equipment Housing, Especially Gears, with a Cooled Appliance Inner Chamber. 2012.05.16. 9. P- 399186. Gear Box with a Cooled Appliance Inner Chamber. 2012.05.16.

Uwagi

Opracowanie ze środków MNiSW w ramach umowy 812/P-DUN/2016 na działalność upowszechniającą naukę (zadania 2017)