The die reconstruction of the sterile inflatable nasal tubes for haemorrhage prevention

• Autorzy: Grabowik C. , Janik W. , Kalinowski K.
• Języki publikacji: EN

Abstrakty

EN

This paper presents the reconstruction process of medical devices designed for prevention of the haemorrhage in the nasal cavity. The DEMED company (the medical parts plant) turned to authors in order to start a scientific project concerning the problem of elements reconstruction in case of lack of technical documentation. The additional problem with original parts resulted from the original parts manufacturing technology – parts were handmade. The economic purpose from DEMED company angle was to increase the production volume thanks to accessibility of greater number of moulds designed and produced on the basis of reconstructed parts geometry. The proposed in the paper solution is based on hybrid model and selected cross-sections transfer into 2D CAD software in order to prepare technical documentation. In the reconstruction process the 3D scanning was used.

Słowa kluczowe

EN

haemorrhage; nose; medical device; 3D scanning

PL

krwotok; nos; urządzenie medyczne; skanowanie 3D

• Wydawca: Instytut Automatyzacji Procesów Technologicznych i Zintegrowanych Systemów Wytwarzania Politechniki Śląskiej
• Czasopismo: Selected Engineering Problems
• Rocznik: 2013
• Tom: nr 4
• Strony: 91--96
• Opis fizyczny: Bibliogr. 7 poz.

Twórcy

autor

Grabowik C.

• Institute of Engineering Processes Automation and Integrated Manufacturing Systems, Silesian University of Technology, Faculty of Mechanical Engineering, Gliwice, Poland

autor

Janik W.

• Institute of Engineering Processes Automation and Integrated Manufacturing Systems, Silesian University of Technology, Faculty of Mechanical Engineering, Gliwice, Poland

autor

Kalinowski K.

• Institute of Engineering Processes Automation and Integrated Manufacturing Systems, Silesian University of Technology, Faculty of Mechanical Engineering, Gliwice, Poland

Bibliografia

• 1. http://www.demed.pl/
• 2. Grabowik C., Janik W., The concrete casting matrixes inserts design preparation based on the master models, Advanced Materials Research, Advanced Material Science and Mechanics, 2013 vol. 702, p. 259-262.
• 3. Grabowik C., Kalinowski K., Object-oriented models in an integration of CAD/CAPP/CAP systems. Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), 6679 LNAI (PART 2), (2011) p. 405-412.
• 4. Grabowik C., Kalinowski K.: A review of rapid tooling technologies in technical production preparation. Selected Engineering Problems, vol. 3 (2012), p. 87-92.
• 5. Grabowik C., Kalinowski K.: A review of rapid tooling technologies in technical production preparation – a vacuum casting practical example. Selected engineering problems, vol. 3 (2012), p. 81-86.
• 6. Janik W.: Computer aided overhaul in expert system application – the disassembly module, Selected Engineering Problems, Volume 2, Silesian University of Technology Publishing, 2/2011, p.151-158.
• 7. Janik W.: Computer aided overhaul in expert system application – the aggregation module, Selected Engineering Problems, Volume 2, Silesian University of Technology Publishing, 2/2011, p.159-164.