Study of the two-rotor electric motor of a drive of vehicle drive wheels

• Autorzy: Sergienko Nikolay , Kuznetsov Valeriy , Liubarskyi Borys , Pastushchina Mariia , Gołębiowski Piotr , Tkaczyk Sławomir

Identyfikatory

DOI

10.5604/01.3001.0015.6933

• Języki publikacji: EN

Abstrakty

EN

In recent years, electric and hybrid vehicles have taken more and more attention due to their apparent advantages in saving fuel resources and reducing harmful emissions into the environment. Even though electric vehicles can solve the ecological problem, their operation is faced with a number of inconveniences associated with a limited driving distance from a single charge due to limited storage of energy from an independent power source and a lack of the required service and repair infrastructure. In hybrid and electric vehicles one of the main parameters is the curb weight, which affects energy consumption, vehicle speed, stability, controllability and maneuverability. In this regard, leading car manufacturers use parts with a low specific weight (non-metallic, aluminum alloys, etc.) in the design and also exclude some units from the design. Due to these technical solutions, the vehicle's operating is improved. One of the groups of parameters to be defined when designing a new electric vehicle is the parameters relating to the electric motor. The purpose of the article is determination of the mechanical characteristics of a two-rotor electric motor during magnetic flux control and assessment of the possibility of organizing the drive of the drive wheels of the vehicle. The electric motor has two mechanically independent outputs. For the study, an electrical equivalent diagram has been developed for the given two-rotor electric motor. A simulation model of the equivalent diagram has been built. Simulating the interaction processes of the rotors with the stator made it possible to obtain data for building the mechanical characteristics for each output of the electric motor. Analysis and processing of the mechanical characteristics data of the electric motors showed the conformity and the range of changes in the torque on each of the rotors when changing their slip and revolution, which are required when building algorithms for the operation of electric motor control systems as part of drives for various purposes. Analysis of the simulation results made it possible to assess the possibility of using the considered two-rotor electric motor for the drive of drive wheels in an electric and hybrid wheeled vehicle.

Słowa kluczowe

EN

two-rotor electric motor; torque; revolution; slip; drive; drive wheel; electric vehicle; hybrid vehicles

PL

silnik elektryczny dwuwirnikowy; moment obrotowy; obrót; poślizg; napęd; pojazd elektryczny; pojazd hybrydowy

• Wydawca: Warsaw University of Technology, Faculty of Transport
• Czasopismo: Archives of Transport
• Rocznik: 2021
• Tom: Vol. 60, iss. 4
• Strony: 245--257
• Opis fizyczny: Bibliogr. 32 poz., rys., wykr.

Twórcy

autor

Sergienko Nikolay

• National Technical University “Kharkiv Polytechnic Institute”, Kharkiv, Ukraine

• https://orcid.org/0000-0001-5168-1924

autor

Kuznetsov Valeriy

• Railway Research Institute, Warsaw, Poland

autor

Liubarskyi Borys

• National Technical University “Kharkiv Polytechnic Institute”, Kharkiv, Ukraine

autor

Pastushchina Mariia

• National Technical University “Kharkiv Polytechnic Institute”, Kharkiv, Ukraine

autor

Gołębiowski Piotr

• Warsaw University of Technology, Faculty of Transport, Warsaw, Poland

• https://orcid.org/0000-0001-6885-7738

autor

Tkaczyk Sławomir

• Warsaw University of Technology, Faculty of Transport, Warsaw, Poland

• https://orcid.org/0000-0001-7677-9573

Bibliografia

• [1] Advanced Vehicle Testing Activity (2013). Electronic text data. Idaho: Idaho National Laboratory.
• [2] Andreev, A.F., Vantsevich, V.V., & Lefanov, A.K. (1987). Differentials of wheeled machines. Moscow: Mashinostroenie, 176 p.
• [3] Belousov, B.N., & Shukhman, S.B. (2013). Applied mechanics of ground traction vehicles with mechatronic systems. Moscow: Agroconsult, 612 p.
• [4] Bokarev, A.I. (2014). Prospects for the use of an individual adjustable power drive in active safety systems. Journal of Automotive Engineers, 7, 20-25.
• [5] Czerepicki, A. (2019). Study on effectiveness of using column-oriented databases in the processing of measurement characteristics of an electric vehicle. Archives of Transport, 51(3), 77-84. DOI: 10.5604/01.3001.0013.6164
• [6] Francfort, J. (2006). Hybrid Electric Vehicle Fleet and Baseline Performance Testing. Idaho: Idaho National Laboratory.
• [7] Gołębiowski, P., Żak, J., & Jacyna-Gołda, I. (2020). Approach to the Proecological Distribution of the Traffic Flow on the Transport Network from the Point of View of Carbon Dioxide. Sustainability, 12, 6936. doi: 10.3390/su12176936
• [8] Gruosso, G. (2014). Optimization and management of energy power flow in hybrid electrical vehicles. In: 5th IET Hybrid and Electric Vehicles Conference (HEVC 2014), 1‒5. DOI: 10.1049/cp. 2014.0962.
• [9] Izdebski, M., & Jacyna, M. (2018). The organization of municipal waste collection: The decision model. Rocznik Ochrona Środowiska, 20, 919–933.
• [10] Jacyna, M., Gołębiowski, P., & Urbaniak, M. (2016). MultiOption Model of Railway Traffic Organization Including the Energy Recuperation, In: Challenge of Transport Telematics, Springer Int. Pub. DOI: 10.1007/978-3-319-49646-7_17
• [11] Jacyna, M., Wasiak, M., Lewczuk, K., & Kłodawski, M. (2014). Simulation model of transport system of Poland as a tool for developing sustainable transport. Archives of Transport, 32(4), 17-28. DOI: 10.5604/08669546.1146982
• [12] Jacyna, M., & Semenov, I. (2020). Models of vehicle service system supply under information uncertainty. Eksploatacja i Niezawodność, 22(4), 694–704, DOI: 10.17531/ein.2020.4.13
• [13] Jacyna, M., Wasiak, M., Lewczuk, K., Chamier-Gliszczyński, N., & Dąbrowski, T. (2018). Decision problems in developing pro-ecological transport system. Rocznik Ochrona Środowiska, 20, pp. 1007-1025.
• [14] Jacyna-Gołda, I., Żak, J., & Gołębiowski, P. (2014). Models of traffic flow distribution for various scenarios of the development of proecological transport system. Archives of Transport, 31(3), 23-35. DOI: https://doi.org/10.5604/01.3001.0014.8797
• [15] Jichao, L., & Yangzhou, C. (2016). An online energy management strategy of parallel plug-in hybrid electric buses based on a hybrid vehicle-road model. In: IEEE 19 th International Conference on Intelligent Transportation Systems, 927-932. DOI: 10.1109/ITSC.2016.7795666.
• [16] Kozakevich, I. (2017). Investigation of the direct torque control system of an electromechanical system with a matrix converter. In: Proceedings of the International Conference on Modern Electrical and Energy Systems, 228-231. DOI: 10.1109/MEES.2017.8248896.
• [17] Morkun, V., & Tron, V. (2014). Ore preparation energy-efficient automated control multicriteria formation with considering of ecological and economic factors. Metallurgical and Mining Industry, 5, 8‒10.
• [18] Paś, J., Rosiński, A., & Białek, K. (2021). A Reliability-Exploitation Analysis of a Static Converter Taking Into Account Electromagnetic Interference. Transport and Telecommunication Journal, 22(2), 217-229. doi: 10.2478/ttj-2021-0017
• [19] Pielecha, I. (2021). Energy management system of the hybrid ultracapacitor-battery electric drive vehicles. Archives of Transport, 58(2), 47-62. DOI: doi: 10.5604/01.3001.0014.8797
• [20] Sergienko, M.Y., Lyubarskiy, B.G., & Pastushchina, M.I. (2019). Mathematical modeling of the electric drive of the wheels of a car with a two-rotor electric motor. Information technologies: science, technology, technology, education, health: theses of additional reasons XXVI MicroCAD-2019, April 16-18, 2019. Kharkiv: NTU "KhPI", 208.
• [21] Sergienko, N.Y., Lyubarsky, B.G., & Pastushchina, M.I. (2018). Features of the use of electric drive and control systems on modern cars. Vesnik NTU "KhPI". Series: Automobile and tractor construction. Kharkiv: NTU "KhPI", 49(1325), 40–49.
• [22] Sinchuk, O., & Kozakevich, I. (2017). Research of regenerative braking of traction permanent magnet synchronous motors. Proceedings of the International Conference on Modern Electrical and Energy Systems, 92-95. DOI: 10.1109/MEES.2017.824896.
• [23] Sinchuk, O.N., Kozakevich, I.A., & Yurchenko, N.N. (2017). Sensorless control of switched reluctance motors of traction electromechanical systems. Technical electrodynamics, 5, 62-66. DOI: 10.15407/techned2017.05.062.
• [24] Son, Y., & Ha, J.-I. (2015). The electric variable transmission without slip ring for the hybrid electric vehicle driving structure. In 9th International Conference on Power Electronics and ECCE Asia, 857-862.
• [25] Szaciłło, L, Jacyna, M, Szczepański, E, & Izdebski, M. (2021). Risk assessment for rail freight transport operations. Eksploatacja i Niezawodność – Maintenance and Reliability, 23(3), 476–488, doi: 10.17531/ein.2021.3.8
• [26] Tong, C., Zheng, P., Wu, Q., Bai, J., & Zhao, Q. (2014). A brushless claw-pole double-rotor machine for power-split hybrid electric vehicles. IEEE Transactions on Industrial Electronics, 61, 4295-4305. DOI: 10.1109/TIE.2013.2281169.
• [27] Toruń, A., Sokołowska, L., & Jacyna, M. (2019). Communications-based train control system - Concept based on WiFi LAN network. Transport Means - Proceedings of the International Conference, 911–915.
• [28] Urbaniak, M., Kardas-Cinal, E., & Jacyna, M. (2019). Optimization of Energetic Train Cooperation. Symmetry, 11, 1175. doi: 10.3390/sym11091175
• [29] Voliansky, R.S., & Sadovoi, A.V. (2017). Second order sliding mode control of the inverted pendulum. In: Proceedings of the International Conference on Modern Electrical and Energy Systems, 224-227. DOI: 10.1109/MEES.2017.8248895.
• [30] Xiang, Z., Quan, L., Zhu, X., & Wang, L. (2015). A brushless double mechanical port permanent magnet motor plug-in HEVs. IEEE Transactions on Magnetics, 51, 1‒4. DOI: 10.1109/TMAG.2015.2443048.
• [31] Yang, Y., Schofield, N., & Emadi, A. (2015). Double-rotor switched reluctance machine (DRSRM). IEEE Transactions on Energy Conversion, 30, 671-680. DOI: 10.1109/TEC.2014.2378211.
• [32] Zhao, X., & Niu, S. (2016). A novel double-rotor parallel hybrid-excitation machine for electric vehicle propulsion. In: IEEE Conference on Electromagnetic Field Computation, 1‒5. DOI: 10.1109/CEFC.2016.7816052.

Uwagi

The article has been presented on XI International Logistic Systems: Theory and Practice Conference (11-12 October 2021).