Development of polyurethane paint metallic effect without cloud defect

• Autorzy: Pasieczyński Ł. , Radek N.

Warianty tytułu

EN

The article presents tests results of the metallic paint system. The system consists of high solid corrosion protection primer and dual-component topcoat with a metallic gloss effect (RAL 9006). The paint system properties were examined after the conditioning period. The measurements included an adhesion test, a flexibility test, hardness test, gloss test, a corrosion resistance test and a humidity resistance test. The article focuses on “cloud” defect in metallic paints because of grain distribution in topcoat and also presents results of the product developed in our company.

• Języki publikacji: EN

Słowa kluczowe

EN

metallic effect; metallic pigments; cloud defect; topcoat defects

PL

efekt metaliczny; pigment metaliczny; defekt chmury; defekty warstwy wierzchniej

• Wydawca: Oficyna Wydawnicza Stowarzyszenia Menedżerów Jakości i Produkcji
• Czasopismo: Production Engineering Archives
• Rocznik: 2015
• Tom: Vol. 7, No. 2
• Strony: 2--5
• Opis fizyczny: Bibliogr. 12 poz., rys., tab.

Twórcy

autor

Pasieczyński Ł.

• F. H. BARWA, ul. Warkocz 3-5, 25-253 Kielce, Poland

autor

Radek N.

• Centre for Laser Technologies of Metals, University of Technology in Kielce, Al. 1000-lecia Państwa Polskiego 7, 25-314 Kielce, Poland

Bibliografia

• 1. Hryniewicz T. 2004. Surface Technology and Coatings, Wydawnictwo Uczelniane Politechniki Koszalińskiej, Koszalin (Technologia powierzchni i powłok).
• 2. Collective Work 1983. Painting and Paint Coatings, ed. III, WNT, Warszawa (Praca zbiorowa: Powłoki malarsko-lakiernicze).
• 3. Service Manual 2/08. Painter Vademecum (Poradnik Serwisowy Vademecum lakiernik ).
• 4. http://www.schlenk.com.
• 5. Bokůvka O., Liptáková T., Palček P., Chalupová M., Trško L. 2013. The Influence of Wielded Joint Quality on Safety and Reliability in Operation Vol.1 No.1 Production Engineering Archives.
• 6. Borkowski S., Knop K. 2013. Visual Control as a Key Factor in a Production Process of a Company from Automotive Branch Vol.1 No.1 Production Engineering Archives.
• 7. Šurinová Y., Lestyánszka Škůrková K. 2013. Brief Review of German Standards for Quality Audits in Automotive Production Vol.1 No.1 Production Engineering Archives.
• 8. Szklarzyk P. 2014. Visual Inspection as One of the Important Elements of the Quality Control Vol.2 No.1 Production Engineering Archives.
• 9. Jagusiak-Kocik M. 2014. Ensuring Continuous Improvement Processes Through Standardization in the Automotive Company Vol.2 No.1 Production Engineering Archives.
• 10. Klimecka-Tatar D., 2014. Importance of Development Factors in Company Dealing with Cataphoresis Coating Method Vol.2 No.1 Production Engineering Archives.
• 11. Romankiewicz R., Romankiewicz F. 2014.The influence of Modification for Structure and Impact resistance of Silumin AlSi11 Vol.3 No.2 Production Engineering Archives.
• 12. Hanus P., Konečný M., 2014. Influence of the Welding Process on Martensitic High Strength Steel Vol.3 No.2 Production Engineering Archives.