Roughness of 1.0721 steel after corrosion tests in 20% NaCl

• Autorzy: Lipiński T.
• Języki publikacji: EN

Abstrakty

EN

Non-alloy quality case-hardening steels are used for low-load components made on automatic machining centers (automatic lines). Because of the widespread use of these steel in open constructions, they are exposed to atmospheric corrosion. The study attempted to analyze the effect of 20% aqueous NaCl solution on the roughness of the steel as a result of corrosion. The steel roughness and corrosion wear were determined according to corrosion time.

Słowa kluczowe

EN

steel; corrosion; corrosion rare; roughness; NaCl solution

PL

korozja stali; roztwór NaCl; chropowatość stali; zużycie korozyjne

• Wydawca: Oficyna Wydawnicza Stowarzyszenia Menedżerów Jakości i Produkcji
• Czasopismo: Production Engineering Archives
• Rocznik: 2017
• Tom: Vol. 15
• Strony: 27--30
• Opis fizyczny: Bibliogr. 27 poz., rys., tab.

Twórcy

autor

Lipiński T.

• University of Warmia and Mazury in Olsztyn, The Faculty of Technical Sciences, St: Oczapowskiego 11, 10-957 Olsztyn, Poland

Bibliografia

• 1. AL-DUHEISAT S.A., EL-AMOUSH A.S. 2016. Effect of deformation conditions on the corrosion behavior of the low alloy structural steel girders. Materials and Design vol. 89, 342–347.
• 2. ALIZADEH M., BORDBAR S. 2013. The influence of microstructure on the protectiveproperties of the corrosion product layer generated on the welded API X70 steel in chloride solution. Corrosion Science 70, 170–179.
• 3. BOHNI H. 2005. Corrosion in reinforced concrete structures. CCR Press England 247 p.
• 4. CHANDRAMOULI R., KANDAVEL T.K., SHANMUGHA SUNDARAM D., ASHOK KUMAR T. 2007. Deformation, densification and corrosion studies on sintered P/M plain carbon steel preforms. Material Design 28, 2260-2264.
• 5. DOSCH H., MITTEMEIJER E., RÜHLE M., VAN DE VOORDE M.H. 2001. Europen White Book of Fundamental Research. Material Sciences. Max-Planck-Institut für Metallforschung Stuttgart, Germany.
• 6. DUDEK A., WROŃSKA A., ADAMCZYK L. 2014. Surface remelting of 316 L+434 L sintered steel: microstructure and corrosion resistance. Journal Solid State Electrochemistry 18/11, 2973-2981.
• 7. EL-ETRE A.Y., ABDALLAH M. 2000, Natural honey as corrosion inhibitor for metals and alloys. II. C-steel in high saline water. Corrosion Science 42(4), 731–738.
• 8. EN 10025-2:2004. Hot rolled products of structural steels – Part 2: Technical delivery conditions for non-alloy structural steel.
• 9. KOCAŃDA D., MIERZYŃSKI J., MROZIŃSKI S., TORZEWSKI J. 2014. Fatigue Behaviour of S235JR Steel after Surface Frictional-Mechanical Treatment in Corrosive Environment. Key Engineering Materials 598, 105-112.
• 10. LIPIŃSKI T. 2015. Corrosion Rate of the X2CrNiMoN22-5-3 Duplex Stainless Steel Annealed at 500 degrees C. Acta Physica Polonica A, 130(4), 993-995.
• 11. LIPIŃSKI T. 2016. Corrosion Resistance of 1.4362 Steel in Boiling 65% Nitric Acid. Manufacturing Technology 16(5), 1004-1009.
• 12. MACHUCA L.L., JEFFREY R., MELCHERS R. E. 2016. Microorganisms associated with corrosion of structural steel in diverse atmospheres. International Biodeterioration & Biodegradation 114, 234-243.
• 13. NAVEEN E., RAMNATH B.V., ELANCHEZHIAN C., MOHAMED NAZIRUDEEN S.S. 2017. Influence of organic corrosion inhibitors on pickling corrosion behaviour of sinter-forged C45 steel and 2% Cu alloyed C45 steel. Journal of Alloys and Compounds 695, 3299-3309.
• 14. PN EN ISO 3651-1, Determination of resistance to intergranular corrosion of stainless steels. Part 1: Austenitic and ferritic-austenitic (duplex) stainless steels. Corrosion test in nitric acid medium by measurement of loss in mass (Huey test).
• 15. PN EN ISO 3651-1. Determination of resistance to intergranular corrosion of stainless steels. Part 1: Austenitic and ferriticaustenitic (duplex) stainless steels.
• 16. PN-EN 10027-1:2016-12 Designations systems for steeo – part 1 steel names.
• 17. PRADITYANA A., SULISTIJONO S., SHAHAB A. 2013. Effectiveness of myrmecodia pendans extract as eco-friendly corrosion inhibitor for material API 5L grade B in 3,5% NaCl solution. Advanced Material Research 789, 484–491.
• 18. SANTANA RODRIQUEZ J. J., GONZALEZ GONZALEZ J. E. 2006. Identification and formation of green rust 2 as an atmospheric corrosion product of carbon steel in marine atmospheres. Materials and Corrosion 57(5), 411-417.
• 19. SCENDO M., RADEK N., TRELA J. 2013. Influence of laser treatment on the corrosive resistance of Wc-Cu coating produced by electrospark deposition. Int. J. Electrochem. Sc 8, 9264-9277.
• 20. SELEJDAK J., ULEWICZ R., INGALDI M. 2014. The evaluation of the use of a device for producing metal elements applied in civil Engineering. In 23rd International Conference on Metallurgy and Materials. Ostrava: TANGER 1882-1888.
• 21. SZABRACKI P., LIPIŃSKI T. 2013. Effect of aging on the microstructure and the intergranular corrosion resistance of X2CrNiMoN25-7-4 duplex stainless steel. Solid State Phenomena 203-204, 59-62.
• 22. SZABRACKI P., LIPIŃSKI T. 2014. Influence of sigma phase precipitation on the intergranular corrosion resistance of X2CrNiMoN25-7-4 super duplex stainless steel. In: METAL 2014: 23rd International Conference on Metallurgy and Materials. Ostrava: TANGER 476-481.
• 23. THOMPSON N. G., YUNOVICH M., DUNMIRE D. 2007. Cost of corrosion and corrosion maintenance strategies. Corrossion Reviews 25, 247-262.
• 24. UHLIG H. H., REVIE R.W. 1985. Corrosion and corrosion control. 3rd Edition, John Wiley and Sons.
• 25. ULEWICZ R. 2003. Quality control system in production of the castings from spheroid cast iron. Metalurgija 42(1), 61-63.
• 26. ULEWICZ R., NOVÝ F., SELEJDAK J. 2014. Fatigue Strength of Ductile Iron in Ultra-High Cycle Regime, Advanced Materials Research 874, 43-48.
• 27. ZATKALÍKOVÁ V., MARKOVIČOVÁ L., CHALUPOVÁ M. 2016. Corrosion resistance of Cr-Ni-Mo Stainless Steel in Chloride and Fluoride Containing Environment. Manufacturing Technology 16(5), 1193 – 1198.

Uwagi

Opracowanie ze środków MNiSW w ramach umowy 812/P-DUN/2016 na działalność upowszechniającą naukę (zadania 2017).