PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Application of computed tomography for an analysis of composite with fine dispersive reinforcement made of the Fe65Co10Ni3W2B20 alloy

Wybrane pełne teksty z tego czasopisma
Identyfikatory
Warianty tytułu
Języki publikacji
EN
Abstrakty
EN
Purpose: The paper presents the results of microstructure and mechanical properties of composites resulting from a combination of powders of metallic glasses with an epoxy resin (Epidian 100). The study was performed using computed tomography. Design/methodology/approach: The filler used was made of a Fe65Co10Ni3W2B20 amorphous alloy based on, showing in the state after the formation the soft magnetic properties. The aim of the study was to determine the effect of the fraction of the composite powders on the microstructure parameters (mean pore diameter and pore volume fraction) and the properties of the obtained composites. Findings: Based on the survey it was found out that size fraction used does not affect the value of the modulus of elasticity linear composites studied. It was also shown that the composites analysed in an attempt to compress the cross cracked grain boundaries. The influence fraction powders and change the share of the pore size depending on the fraction of the filler. Research limitations/implications: No studies of the magnetic properties determine the usefulness of these materials in the electronics industry. Practical implications: Practical implications are to size the test specimens in the limited range of tests. In the future, it is planned to produce samples with a larger diameter. Originality/value: The paper presents a new group of composites-based metallic glasses conditions characterised by good properties produced a simple and inexpensive method.
Rocznik
Strony
17--22
Opis fizyczny
Bibliogr. 10 poz.
Twórcy
autor
  • Faculty of Materials Science and Engineering, Warsaw University of Technology, ul. Wołoska 141, 02-507 Warszawa, Poland
autor
  • Institute of Materials Science and Engineering, Faculty of Production Engineering and Materials Technology, Czestochowa University of Technology, Al. Armii Krajowej 19, 42-200 Częstochowa, Poland
autor
  • Institute of Materials Science and Engineering, Faculty of Production Engineering and Materials Technology, Czestochowa University of Technology, Al. Armii Krajowej 19, 42-200 Częstochowa, Poland
autor
  • Institute of Physics, Faculty of Production Engineering and Materials Technology, Czestochowa University of Technology, Al. Armii Krajowej 19, 42-200 Częstochowa, Poland
  • Institute of Materials Science and Engineering, Faculty of Production Engineering and Materials Technology, Czestochowa University of Technology, Al. Armii Krajowej 19, 42-200 Częstochowa, Poland
autor
  • Institute of Materials Science and Engineering, Faculty of Production Engineering and Materials Technology, Czestochowa University of Technology, Al. Armii Krajowej 19, 42-200 Częstochowa, Poland
  • Institute of Physics, Faculty of Production Engineering and Materials Technology, Czestochowa University of Technology, Al. Armii Krajowej 19, 42-200 Częstochowa, Poland
autor
  • Institute of Physics, Faculty of Production Engineering and Materials Technology, Czestochowa University of Technology, Al. Armii Krajowej 19, 42-200 Częstochowa, Poland
Bibliografia
  • [1] B. Zibowicz, D. Szewieczek, L.A. Dobrzaski, Influence of the manufacturing technology of on the structure and properties of composite materials consisting of powders, nanocrystalline materials and polymers, Material Engineering 3/151 (2006) 676-679 (in Polish).
  • [2] L.A. Dobrzaski, Fundamentals of materials science and metallurgy, WNT, Gliwice-Warsaw, 2002 (in Polish).
  • [3] W Kubiski, Materials Science, Tom I, Basic materials used in the technique, Publisher AGH, Krakow, 1 (2010) 210-211 (in Polish).
  • [4] J. Sobczyk, S. Wojciechowski, Modern trends in the practical application of metal composites, Composites 2/3 (2002) (in Polish).
  • [5] B. Zibowicz, D. Szewieczek., L.A. Dobrzaski, J. Wysłocki, A. Przybył, Structure and properties of the composite material consisting of the nanocrystalline Fe73.5Cu1Nb3Si13.5B9 alloy powders and polyethylene, Journal of Materials Processing Technology 162/163 (2005) 145-155.
  • [6] L.A. Dobrzaski, M. Drak, J. Trzaska, Corrosion resistance of the polymer matrix hard magnetic composite materials Nd-Fe-B, Journal of Materials Processing Technology 164/165 (2005) 795-804
  • [7] M. Soiski, The magnetic materials in the technique, NOSiW SEP, Warsaw, 2001 (in Polish).
  • [8] T. Kulik, Nanocrystalline soft magnetic materials obtained by the crystallisation of metallic glasses, Publishing of Warsaw University of Technology, Warsaw, 1998 (in Polish).
  • [9] M. Leonowicz, Nanocrystalline magnetic materials WNT, Warsaw, 1998 (in Polish).
  • [10] F. Mazaleyrat, L.K. Varga, Ferromagnetic nanocomposites, Journal of Magnetism and Magnetic Materials 215/216 (2000) 253-259.
Uwagi
Opracowanie ze środków MNiSW w ramach umowy 812/P-DUN/2016 na działalność upowszechniającą naukę (zadania 2017)
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-73a75882-2e38-4c49-9334-451069a9f738
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.