A comparative study on selected physical properties of diesel-ethanol-dodecanol blends

• Autorzy: Krzemiński Artur , Jaworski Artur , Kuszewski Hubert , Woś Paweł

Identyfikatory

DOI

10.19206/CE-170267

• Języki publikacji: EN

Abstrakty

EN

The article presents findings of the comparative analyses of the selected physicochemical parameters of diesel fuel and diesel-ethanol blends with the addition of dodecanol, used to stabilise the blend Diesel fuel and the blends were tested for density, flash point, and cold filter plugging point. The physicochemical properties were assessed in seven samples with different proportional volumes of ethanol contained in diesel fuel. Homogeneous blends were produced by adding 5% dodecanol to blends containing between 5% and 30% ethanol. The study was conducted to assess the selected physicochemical properties of diesel-ethanol blends with the addition of dodecanol and to compare the obtained results with the requirement of EN590:2022-08.

Słowa kluczowe

EN

diesel fuel; ethanol; dodecanol; alternative fuels; physicochemical properties

PL

olej napędowy; etanol; dodekanol; paliwa alternatywne; właściwości fizykochemiczne

• Wydawca: Polskie Towarzystwo Naukowe Silników Spalinowych
• Czasopismo: Combustion Engines
• Rocznik: 2024
• Tom: R. 63, nr 1
• Strony: 99--105
• Opis fizyczny: Bibliogr. 32 poz., fot. kolor., wykr.

Twórcy

autor

Krzemiński Artur

• Department of Automotive Vehicles and Transportation Engineering, Rzeszow University of Technology, Poland

• https://orcid.org/0000-0003-4733-7308

autor

Jaworski Artur

• Department of Automotive Vehicles and Transportation Engineering, Rzeszow University of Technology, Poland

• https://orcid.org/0000-0002-1599-1711

autor

Kuszewski Hubert

• Department of Automotive Vehicles and Transportation Engineering, Rzeszow University of Technology, Poland

• https://orcid.org/0000-0002-2294-6249

autor

Woś Paweł

• Department of Automotive Vehicles and Transportation Engineering, Rzeszow University of Technology, Poland

• https://orcid.org/0000-0003-2730-3258

Bibliografia

• [1] Alptekin E, Canakci M. Determination of the density and the viscosities of biodiesel-diesel fuel blends. Renew Energ. 2008;33(12):2623-2630. https://doi.org/10.1016/j.renene.2008.02.020
• [2] Atmanli A, Yilmaz N. A comparative analysis of n-butanol/ diesel and 1-pentanol/diesel blends in a compression ignition engine. Fuel. 2018;234:161-169. https://doi.org/10.1016/j.fuel.2018.07.015
• [3] Beck NJ, Uyehara OA, Johnson WP. Effects of fuel injection on diesel combustion. SAE Technical Paper 880299. 1988. https://doi.org/10.4271/880299
• [4] Boretti A. Advantages of converting diesel engines to run as dual fuel ethanol-diesel. Appl Therm Eng. 2012;47:1-9. https://doi.org/10.1016/j.applthermaleng.2012.04.037
• [5] Brzeżański M. Carbon dioxide emissions in the aspect of applied engine fuels. Combustion Engines. 2007;131(4):62-67. https://doi.org/10.19206/CE-117319
• [6] Channappagoudra M, Ramesh K, Manavendra G. Comparative study of standard engine and modified engine with different piston bowl geometries operated with B20 fuel blend. Renew Energ. 2019;133:216-232. https://doi.org/10.1016/j.renene.2018.10.027
• [7] Di Y, Cheung C,S, Huang Z. Experimental study on particulate emission of a diesel engine fueled with blended ethanol-dodecanol-diesel. J Aerosol Sci. 2009,40(2):101-112. https://doi.org/10.1016/j.jaerosci.2008.09.004
• [8] Emiroglu AO, Sen M. Combustion, performance and emission characteristics of various alcohol blends in a single cylinder diesel engine. Fuel. 2018;212:34-40. https://doi.org/10.1016/j.fuel.2017.10.016
• [9] Fraioli V, Mancaruso E, Migliaccio M, Vaglieco BM. Ethanol effect as premixed fuel in dual-fuel CI engines: experimental and numerical investigations. Appl Energ. 2014; 119:394-404. https://doi.org/10.1016/j.apenergy.2014.01.008
• [10] Gnanamoorthi V, Devaradjane G. Effect of compression ratio on the performance, combustion and emission of DI diesel engine fueled with ethanol-diesel blend. J Energy Inst. 2015,88(1):19-26. https://doi.org/10.1016/j.joei.2014.06.001
• [11] Device manual C5000. Inkom Instruments, Warszawa 2011.
• [12] Device manual FPP 5Gs. Inkom Instruments, Warszawa 2011.
• [13] Device manual HFP 339. Inkom Instruments, Warszawa 2011.
• [14] Device manual DMA 4500 M. Inkom Instruments, Warszawa 2011
• [15] Device manual OptiDist. Inkom Instruments, Warszawa 2011
• [16] Joshi RM, Pegg MJ. Flow properties of biodiesel fuel blends at low temperatures. Fuel. 2007;86(1-2):143-151. https://doi.org/10.1016/j.fuel.2006.06.005
• [17] Safety data sheet: Ethyl alcohol completely contaminated. Alpinus 2016.
• [18] Safety data sheet: 1-dodecanol ≥ 98% for synthesis. Carl Roth GmbH + Co KG. Karlsruhe 2016.
• [19] Kuszewski H, Krzemiński A, Ustrzycki A. Influence of ethanol addition on kinematic viscosity of diesel fuel. Publishing House Rzeszow University of Technology. Series: Transport. Rzeszow 2016.
• [20] Kuszewski H, Krzemiński A, Ustrzycki A. The effect of alcohol hydration on the cetane test derivative of the oil with ethanol in the propulsion system and add dodecanol. Series: Transport. Publishing House Rzeszow University of Technology. Rzeszow 2017.
• [21] Krzemiński A, Lejda K, Ustrzycki A. Influence of dodecanol addition on cold filter plugging point for the mixtures of diesel oil with ethanol. Conf Ser Mater Sci. 2018; 421:042043. https://doi.org/10.1088/1757-899X/421/4/042043
• [22] Krzemiński A, Lejda K, Ustrzycki A. Influence of dodecanol addition on the energy value of diesel oil mixture with ethanol. Viśniki Narodowy Uniwerystet Transportu. 3(45), Kijów 2019.
• [23] Lotko W. Influence of the type of fuel on the fuel pressure in the injection pipe and the nozzle needle lift in a diesel engine. The Archives of Automotive Engineering. 1997:1-2.
• [24] Mickevicius T, Labeckas G, Slavinskas S. Experimental investigation of biodiesel-n-butanol fuels blends on performance and emissions in a diesel engine. Combustion Engines. 2022;188(1):90-95. https://doi.org/10.19206/CE-142030
• [25] Pielecha I, Czajka J, Borowski P, Wisłocki K. Research-based assessment of the influence of hydrocarbon fuel atomization on the formation of self-ignition spots and the course of pre-flame processes. Combustion Engines. 2014;157(2): 22-35. https://doi.org/10.19206/CE-116942
• [26] Regulation of the Minister of Economy of 9 October 2015 r. on quality requirements for liquid fuels. Journal of Laws 2015, position 1680.
• [27] Sanli BG, Uludamar E, Ozcanli M. Evaluation of energetic-exergetic and sustainability parameters of biodiesel fuels produced from palm oil and opium poppy oil as alternative fuels in diesel engines. Fuel. 2019;258:116116. https://doi.org/10.1016/j.fuel.2019.116116
• [28] Sitnik LJ, Sroka ZJ, Andrych-Zalewska M. The impact on emissions when an engine is run on fuel with a high heavy alcohol content. Energies. 2021;14(1):41. https://doi.org/10.3390/en14010041
• [29] Yasilyurt MK. The effects of the fuel injection pressure on the performance and emission characteristics of a diesel engine fuelled with waste cooking oil biodiesel-diesel blends. Renew Energ. 2019;132:649-666. https://doi.org/10.1016/j.renene.2018.08.024
• [30] Yilmaz N, Ileri E, Atamanli A, Deniz Karaoglan A, Okkan U, Sureyya KM. Predicting the engine performance and exhaust emissions of a diesel engine fueled with hazelnut oil methyl ester: the performance comparison of response surface methodology and LSSVM. J Energ Resour-ASME. 2016;138(5):052206. https://doi.org/10.1115/1.4032941
• [31] www.hmdb.ca/metabolites/HMDB0011626
• [32] www.orlen.pl

Uwagi

Opracowanie rekordu ze środków MNiSW, umowa nr SONP/SP/546092/2022 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2024).