The new functional filler TiO2-SiO2/polyhedral oligomeric hybrid silsesquioxane as a potential modifier of polyethylene

• Autorzy: Kloziński Arkadiusz , Ambrożewicz Damian , Jakubowska Paulina , Dudziec Beata , Andrzejewska Ewa , Marciniec Bogdan , Jesionowski Teofil

Identyfikatory

DOI

10.14314/polimery.2021.11.5

Warianty tytułu

PL

Nowy funkcjonalny napełniacz hybrydowy TiO2-SiO2/wielościenny oligomeryczny silseskwioksan, jako potencjalny modyfikator polietylenu

• Języki publikacji: EN

Abstrakty

EN

The paper presents preliminary application studies of the innovative TiO2 -SiO2 / POSS filler as a potential low-density polyethylene modifier. It was found that the addition of the filler increases the stiffness and hardness of the composite and slightly changes the intensity of its color.

PL

Przedstawiono wstępne badania aplikacyjne innowacyjnego napełniacza TiO2 -SiO2 /POSS jako potencjalnego modyfikatora polietylenu małej gęstości. stwierdzono, że dodatek napełniacza powoduje wzrost sztywności i twardości kompozytu oraz nieznacznie zmienia intensywność jego barwy.

Słowa kluczowe

EN

polymer composites; polyethylene; hybrid fillers; POSS; mechanical properties

PL

kompozyty polimerowe; polietylen; napełniacze hybrydowe; POSS; właściwości mechaniczne

• Wydawca: Sieć Badawcza Łukasiewicz – Instytut Chemii Przemysłowej
• Czasopismo: Polimery
• Rocznik: 2021
• Tom: T. 66, nr 11-12
• Strony: 602--610
• Opis fizyczny: Bibliogr. 55 poz., rys.

Twórcy

autor

Kloziński Arkadiusz

• Institute of Chemical Technology and Engineering, Faculty of Chemical Technology, Poznan University of Technology, Berdychowo 4, 60-965 Poznań, Poland

• https://orcid.org/0000-0002-2025-699X

autor

Ambrożewicz Damian

• Institute of Chemical Technology and Engineering, Faculty of Chemical Technology, Poznan University of Technology, Berdychowo 4, 60-965 Poznań, Poland

autor

Jakubowska Paulina

• Institute of Chemical Technology and Engineering, Faculty of Chemical Technology, Poznan University of Technology, Berdychowo 4, 60-965 Poznań, Poland

• https://orcid.org/0000-0002-8638-1216

autor

Dudziec Beata

• Department of Organometallic Chemistry, Faculty of Chemistry, Adam Mickiewicz University in Poznań, Uniwersytetu Poznańskiego 8, 61-614 Poznań, Poland
• Centre for Advanced Technologies, Uniwersytetu Poznańskiego 10, 61-614 Poznań, Poland

• https://orcid.org/0000-0001-6344-0298

autor

Andrzejewska Ewa

• Institute of Chemical Technology and Engineering, Faculty of Chemical Technology, Poznan University of Technology, Berdychowo 4, 60-965 Poznań, Poland

• https://orcid.org/0000-0002-6940-1289

autor

Marciniec Bogdan

• Centre for Advanced Technologies, Uniwersytetu Poznańskiego 10, 61-614 Poznań, Poland

• https://orcid.org/0000-0001-5203-1376

autor

Jesionowski Teofil

• Institute of Chemical Technology and Engineering, Faculty of Chemical Technology, Poznan University of Technology, Berdychowo 4, 60-965 Poznań, Poland

• https://orcid.org/0000-0002-7808-8060

Bibliografia

• [1] Li G., Wang L., Ni H. et al.: Journal of Inorganic and Organometallic Polymers 2001, 11, 123.
• [2] Li G., Pitman Jr. Ch.U.: “Polyhedral Oligomeric Silsesquioxane (POSS) Polymers, Copolymers, and Resin Nanocomposites”. In: Abd-El-Aziz A.S., Carraher Jr. Ch.E., Pitman Jr. Ch.U. (eds) Macromolecules containing metal and metal-like elements, Group IV A Polymers, vol 4, 79, John Wiley & Sons, Hoboken, NY, 2005. https://doi.org/10.1002/0471712566.ch5
• [3] Baney R.H., Itoh M., Sakakibara A. et al.: Chemicals Reviews 1995, 95, 1409. https://doi.org/10.1021/cr00037a012
• [4] Wu J., Mather P.T.: Journal of Macromolecular Science, Part C: Polymer Reviews 2009, 49, 25. https://doi.org/10.1080/15583720802656237
• [5] Shockey E.G., Bolf A.G., Jones P.F. et al.: Applied Organometallic Chemistry 1999, 13, 311. https: //doi.org/10.1002/(SICI)1099-0739(199904)13:4<311::AID-AOC847>3.0.CO;2-1
• [6] Koyima Y., Usuki A., Kawasumi M. et al.: Journal of Materials Research 1993, 8, 1185. https://doi.org/10.1557/JMR.1993.1185
• [7] Kim K.-M., Keum D.-K., Chujo Y.: Macromolecules 2003, 36, 867. https://doi.org/10.1021/ma021303b
• [8] Usuki A., Kojima Y., Kawasumi M. et al.: Journal of Materials Research 1993, 8, 1179. https://doi.org/10.1557/JMR.1993.1179
• [9] Laine R.M., Choi J., Lee I.: Advanced Materials 2001, 13, 800. https://doi.org/10.1002/1521--4095(200106)13:11<800::AID-ADMA800>3.0.CO;2-G
• [10] Zhang H.-Xi., Lee H.-Yo., Shin Y.-Ju. et al.: Macromolecular Research 2009, 17, 352. https://doi.org/10.1007/BF03218874
• [11] Numan A., Fan H., Dubois P. et al.: Journal of Materials Chemistry A 2019, 7, 21577. https://doi.org/10.1039/C9TA04575A
• [12] Zhou H., Ye Q., Xu J.: Materials Chemistry Frontiers, 2017, 1, 212. https://doi.org/10.1039/C6QM00062B
• [13] Hartmann-Thompson C.: “Applications of Polyhedral Oligomeric Silsesquioxanes”, Springer, Dodrecht, 2011. https://doi.org/10.1007/978-90-481-3787-9
• [14] Kalia S., Pielichowski K. (eds.): “Polymer/POSS Nanocomposites and Hybrid Materials”, Springer, Dodrecht, 2018. https://doi.org/10.1007/978-3-030-02327-0
• [15] Wang J., Liu Y., Yu J. et al.: Polymers 2020, 12, 478. https://doi.org/10.3390/polym12020478
• [16] Liu Y., Wu X., Sun Y. et al.: Polymers 2018, 10, 369. https://doi.org/10.3390/polym10040369
• [17] Mammeri F., Bonhomme C., Ribot F. et al.: Chemistry of Materials 2009, 21, 4163. https://doi.org/10.1021/cm900339h
• [18] Andrzejewska E., Marcinkowska A., Prządka D. et al.: Polimery 2013, 58, 794. https://doi.org/10.14314/polimery.2013.794
• [19] Lee A., Lichtenhan J.D.: Macromolecules 1998, 31, 4970. https://doi.org/10.1021/ma9800764
• [20] Sellinger A., Laine R.M.: Macromolecules 1996, 29, 2327. https://doi.org/10.1021/ma951499y
• [21] Butola B.S., Joshi M., Kumar S.: Fibers and Polymers 2010, 11, 1137. https://doi.org/10.1007/s12221-010-1137-y
• [22] Pracella M., Chionna D., Fina A. et al.: Macromolecular Symposia 2006, 234, 59. https://doi.org/10.1002/masy.200650209
• [23] Huang X., Xie L., Jiang P. et al.: European Polymer Journal 2009, 45, 2172. https://doi.org/10.1016/j.eurpolymj.2009.05.019
• [24] Barczewski M., Czarnecka-Komorowska D., Andrzejewski J. et al.: Polimery 2013, 58, 805. https://doi.org/10.14314/polimery.2013.805
• [25] Barczewski M., Dobrzyńska-Mizera M., Dudziec B. et al.: Journal of Applied Polymer Science 2014, 131, 4031. https://doi.org/10.1002/app.40131
• [26] Barczewski M., Dudziec B., Dobrzyńska-Mizera M. et al.: Journal of Macromolecular Science, Part A: Pure and Applied Chemistry 2014, 51, 907. https://doi.org/10.1080/10601325.2014.953375
• [27] Dintcheva N.Tz., Morici E., Arrigo R. et al.: eXPRESS Polymer Letters 2012, 6, 561. https://doi.org/10.3144/expresspolymlett.2012.59
• [28] Blanco I., Abate L., Antonelli M.L. et al.: eXPRESS Polymer Letters 2012, 6, 997. https://doi.org/10.3144/expresspolymlett.2012.105
• [29] Misra R., Fu B.X., Morgan S.E.: Journal of Polymer Science: Part B: Polymer Physics 2007, 45, 2441. https://doi.org/10.1002/polb.21261
• [30] Xu J., Ding X., Xu R. et al.: Journal of Beijing University of Chemical Technology (Natural Science Edition) 2004, 6, 107. https://journal.buct.edu.cn/en/y2004/v31/i6/107
• [31] Lim S.-K., Hong E.-P., Choi H.J. et al.: Journal of Industrial and Engineering Chemistry 2010, 16, 189. https://doi.org/10.1016/j.jiec.2010.01.049
• [32] Scapini P., Figueroa C.A., Amorim C.L.G. et al.: Polymer International 2010, 59, 175. https://doi.org/10.1002/pi.2704
• [33] Lin O.H., Akil H.M., Ishak Z.A.M.: Advanced Composites Letters 2009, 18, 183. https://doi.org/10.1177/096369350901800601
• [34] Lin O.H., Ishak Z.A.M., Akil H.M.: Materials & Design 2009, 30, 748. https://doi.org/10.1016/j.matdes.2008.05.007
• [35] Fina A., Tabuani D., Camino G.: European Polymer Journal 2010, 46, 14. https://doi.org/10.1016/j.eurpolymj.2009.07.019
• [36] Baldi F., Bignotti F., Fina A. et al.: Journal of Applied Polymer Science 2007, 105, 935. https://doi.org/10.1002/app.26142
• [37] Niemczyk A., Dziubek K., Sacher-Majewska B. et al.: Polymers 2018, 10, 1019. https://doi.org/10.3390/polym10091019
• [38] Niemczyk A., Dziubek K., Sacher-Majewska B. et al.: Journal of Thermal Analysis and Calorimetry 2016, 125, 1287. https://doi.org/10.1007/s10973-016-5497-4
• [39] Szwarc-Rzepka K., Walkowiak M., Osińska-Broniarz M. et al.: Polimery 2013, 58, 748. https://doi.org/10.14314/polimery.2013.748
• [40] Ambrożewicz D., Jakubowska P., Kloziński A. et al.: Polish Journal of Chemical Technology 2013, 15, 42. https://doi.org/10.2478/pjct-2013-0066
• [41] Li W., Zhang Ch., Chi H. et al.: Molecules 2017, 22, 1170. https://doi.org/10.3390/molecules22071170
• [42] Dočekal B., Vojtková B.: Spectrochimica Acta Part B: Atomic Spectroscopy 2007, 62, 304. https://doi.org/10.1016/j.sab.2006.12.004
• [43] Kemp T.J., McIntyre R.A.: Progress in Reaction Kinetics and Mechanism 2001, 26, 337. https://doi.org/10.3184/007967401103165316
• [44] Niemczyk A., Dziubek K., Czaja K. et al.: Polymer Composites 2019, 40, 1354. https://doi.org/10.1002/pc.24866
• [45] Tangchantra N., Kruenate J., Aumnate C. et al.: Advanced Materials Research 2010, 93–94, 300. https://doi.org/10.4028/www.scientific.net/AMR.93-94.300
• [46] Nguyen V.G., Thai H., Mai D.H. et al.: Composites Part B: Engineering 2013, 45, 1192. https://doi.org/10.1016/j.compositesb.2012.09.058
• [47] Cordes D.B., Lickiss P.D., Rataboul F.: Chemicals Reviews 2010, 110, 2081. https://doi.org/10.1021/cr900201r
• [48] Rozga-Wijas K., Stanczyk W.A., Kurjata J. et al.: Materials 2015, 8, 4400. https://doi.org/10.3390/ma8074400
• [49] Zhang Z., Zhang P., Wang Y. et al.: Polymer Chemistry 2016, 7, 3950. https://doi.org/10.1039/C6PY00675B
• [50] Nowacka M., Ambrożewicz D., Jesionowski T.: Journal of Nanomaterials 2013, ID 680821, 1. https://doi.org/10.1155/2013/680821
• [51] Wypych G.: Handbook of Fillers, 4rd edn, ChemTec Publishing, Ontario, 2016.
• [52] Suresh S., Kumar V.S.S.: Procedia Engineering 2014, 97, 632. https://doi.org/10.1016/j.proeng.2014.12.292
• [53] Barczewski M., Mysiukiewicz O., Andrzejewski J. et al.: Polymer Engineering and Science 2020, 60, 1588. https://doi.org/10.1002/pen.25404
• [54] Janik J.: Polimery 2020, 65, 208. https://doi.org/10.14314/polimery.2020.3.5
• [55] Barczewski M., Mysiukiewicz O., Matykiewicz D. et al.: Polymer Testing 2020, 89, 106628. https://doi.org/10.1016/j.polymertesting.2020.106628

Uwagi

Opracowanie rekordu ze środków MNiSW, umowa Nr 461252 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2021)