The Effect of Glow Discharge Nitriding on the Corrosion Resistance of Stainless Steel Orthodontic Arches in Artificial Saliva Solution

• Autorzy: Kamiński J. , Małkiewicz K. , Rębiś J. , Wierzchoń T.

Identyfikatory

DOI

10.24425/amm.2020.131740

• Języki publikacji: EN

Abstrakty

EN

The oral cavity due to its temperature fluctuations, changing pH, high humidity, action of mechanical forces and the presence of microorganisms is a favorable environment for degradation of dental materials. The paper presents comparative results on orthodontic arch-wires AISI304 steel before and after low temperature plasma nitriding carried out at cathodic potential (conventional) and at plasma potential, i.e. in a process incorporating an active screen. Corrosion resistance test on nitrided layers produced on stainless steel were carried out via electrochemical impedance spectroscopy (EIS) and the potentiodynamic method in non-deaerated artificial saliva solution at 37°C. The results were complemented with analysis of the structure, surface topography and microhardness. The results showed an increase in corrosion resistance of AISI304 steel after conventional glow-discharge nitriding.

Słowa kluczowe

EN

steel orthodontic arch-wires; artificial saliva; glow-discharge nitriding; corrosion resistance

• Wydawca: Institute of Metallurgy and Materials Science of Polish Academy of Sciences ; Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences
• Czasopismo: Archives of Metallurgy and Materials
• Rocznik: 2020
• Tom: Vol. 65, iss. 1
• Strony: 375--384
• Opis fizyczny: Bibliogr. 26 poz., fot., rys., tab.

Twórcy

autor

Kamiński J.

• Warsaw University of Technology, Faculty of Materials Science and Engineering,141 Woloska Str., 02-507 Warszawa, Poland

autor

Małkiewicz K.

• Medical University of Lodz, Department of Orthodontic, 4 Tadeusza Kościuszki Av., 90-419 Łódź, Poland

autor

Rębiś J.

• Warsaw University of Technology, Faculty of Materials Science and Engineering,141 Woloska Str., 02-507 Warszawa, Poland

autor

Wierzchoń T.

• Warsaw University of Technology, Faculty of Materials Science and Engineering,141 Woloska Str., 02-507 Warszawa, Poland

Bibliografia

• [1] J. C. Wataha, J. L. Drury, W. O. Chung, Expert Rev. Med. Devices. 10 (4), 519-539 (2013).
• [2] T. P. Chaturvedi, S. N. Upadhayay, Indian J. Dent. Res. 21 (2), 275-284 (2010).
• [3] M. Jaishankar, T. Tseten, N. Anbalagan, B. B. Mathew, K. N. Beeregowda, Interdiscip. Toxicol. 7 (2), 60-72 (2014).
• [4] S. M. Castro, M. J. Ponces, J. D. Lopes, M. Vasconcelos, M. C. F. Pollmann, J. Dent. Sci. 10 (1), 1-7 (2015).
• [5] D. M. Proctor, M. Suh, S. L. Campleman, C. M. Thompson, Toxicology 325, 160-179 (2014).
• [6] J. Palus, K. Rydzynski, E. Dziubaltowska, K. Wyszynska, A. T. Natarajan, R. Nilsson, Mutat. Res-Gen. Tox. En. 540 (1), 19-28 (2003).
• [7] H. Zhang, S. Guo, D. Wang, T. Zhou, L. Wang, J. Ma, Angle Orthod. 86 (5), 782-788 (2016).
• [8] V. Katić, H. O. Ćurković, D. Semenski, G. Baršić, K. Marušić, S. Špalj, Angle Orthod. 84 (6), 1041-1048 (2014).
• [9] H. Sugisawa, H. Kitaura, K. Ueda, K. Kimura, M. Ishida, Y. Ochi, A. Kishikawa, S. Ogawa, T. Takano-Yamamoto, Dent. Mater. J. 37 (2), 286-292 (2018).
• [10] E. Czarnowska, T. Wierzchon, A. Maranda-Niedbała, E. Karczmarewicz, J. Mater. Sci. Mater. Med. 11 (2), 73-81 (2000).
• [11] J. Flis, Surf. Eng. 26 (1-2), 103-113 (2010).
• [12] T. Wierzchon, E. Czarnowska, J. Grzonka, A. Sowinska, M. Tarnowski, J. Kaminski, K. Kulikowski, T. Borowski, K. J. Kurzydłowski, Appl. Surf. Sci. 334, 74-79 (2015).
• [13] S. C. Gallo, H. Dong, Surf. Coat. Techn. 203 (24), 3669-3675 (2009).
• [14] E. Skolek, J. Kaminski, J. Sobczak, T. Wierzchon, Vacuum 85 (2), 164 -169 (2010).
• [15] R. R. M. de Sousa, F. O. de Araujo, K. J. B. Ribeiro, M. W. D. Mendes, J. A. P. de Costa, C. Alves, Mater. Sci. Eng. 465 (1-2), 223-227 (2007).
• [16] Y. Li, Y. He, S. Zhang, X. He, W. Wang, B. Hu, Vacuum, 146 (12), 1-7 (2017).
• [17] A. Sowinska, E. Czarnowska, M. Tarnowski, J. Witkowska, T. Wierzchon, Appl. Surf. Sci. 436, 382-390 (2018).
• [18] S. C. Gallo, H. Dong, Vacuum 84 (2), 321-325 (2010).
• [19] K. Malkiewicz, M. Sztogryn, M. Mikulewicz, A. Wielgus, J. Kaminski, T. Wierzchon, Arch. Civ. Mech. Eng. 18 (3), 941-947 (2018).
• [20] M. E. Orazem, B. Tribollet, Electrochemical impedance spectroscopy, Wiley, New Jersey-Hoboken (2008).
• .[21] D. Grygier, V. Hoppe, A. Ziety, M. Rutkowska-Gorczyca, Eng. Biomater. 146, 8-13 (2018).
• [22] Y. Sun, X. Y. Li, T. Bell, J. Mater. Sci. 34 (19), 4793-4802 (1999).
• [23] T. Wierzchon, E. Czarnowska, J. Morgiel, A. Sowinska, M. Tarnowski, A. Rogulska, Arch. Metall. Mater. 60 (3B), 2153-2159 (2015).
• [24] T. Borowski, J. Jelenkowski, M. Psoda, T. Wierzchon, Surf. Coat. Techn. 204 (9), 1375-1379 (2010).
• [25] Y. S. Al Jabbari, J. Fehrman, A. C. Barnes, A. M. Zapf, S. Zinelis, D. W. Berzis, Coatings, 2 (3), 160-178 (2012).
• [26] A. Wichelhaus, M. Geserick, R. Hibst, F. G. Sander, Dental Materials, 21 (10), 938-945 (2005)

Uwagi

PL

Opracowanie rekordu ze środków MNiSW, umowa Nr 461252 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2020).