A study on the properties of surface – active fluids used in burnishing and shot peening processes

• Autorzy: Zaleski K.

Identyfikatory

DOI

10.12913/22998624/64012

• Języki publikacji: EN

Abstrakty

EN

A method is presented for the study of surface-active properties of a fluids, in burnishing and shot peening processes used, which consists in comparing mean plastic strains of thin metal foil subjected to tensile tests in the examined fluid and in air. As a surface-active additive to the fluid (mineral oil), methyl polymethacrylate solution was used. It was found that the surfactant activity coefficient depended on the type of examined fluid as well as on the thickness of the foil being stretched. Results of analyses of the surface-active properties of a fluid can be compared only when metal foils of equal thickness made from one specific material are used. It can be supposed that the introduction of methyl polymethacrylate solution as an additive to the metalworking fluid will have a beneficial effect on the course and the results of burnishing and shot peening of metals.

Słowa kluczowe

EN

burnishing; shot peening; polymer solutions; methyl polymethacrylate; metalworking fluids; surface-active properties

• Wydawca: Lublin University of Technology ; Polish Society of Ecological Engineering (PTIE), Branch of PTIE in Lublin
• Czasopismo: Advances in Science and Technology. Research Journal
• Rocznik: 2016
• Tom: Vol. 10, nr 31
• Strony: 235--239
• Opis fizyczny: Bibliogr. 18 poz., fig.

Twórcy

autor

Zaleski K.

• Department of Mechanical Engineering, Lublin University of Technology, 36 Nadbystrzycka Str., 20-618 Lublin, Poland

Bibliografia

• 1. Buckley D.H.: Surface effects in adhesion, friction, wear and lubrication. Elsevier Scientific Publishing Company, Amsterdam – Oxford – New York 1981.
• 2. Cambiella A., Benito J.M., Pazos C., Coca J., Hernandez A., Fernandez J.E.: Formulation of emusifiable cutting fluids and extreme pressure behaviour. Journal of Materials Processing Technology, 184, 2007, 139-145.
• 3. Dąbrowski J., Firkowski A., Gierzyńska – Dolna M.: Ciecze obróbkowe do skrawania metali. WNT, Warszawa 1988.
• 4. El Baradie M.A.: Cutting fluids: Part I. Characterization. Journal of Material Processing Technology, 56, 1996, 786-797.
• 5. Gorohovskij G.A.: Polimery v tehnologii obrabotki metallov. Naukova Dumka, Kiev 1975.
• 6. Jain V.K., Shukla D.S.: Study of EP activity of water – soluble inorganic metallic salts for aqueous cutting fluids, 193, 1996, 226-234.
• 7. Kulakowska A., Kukielka L., Kukielka K., Malag L., Patyk R., Bohdal L.: Possibility of steering of products surface layer properties in burnishing roll¬ing process. Applied Mechanics and Materials, 474, 2014, 442-447.
• 8. Maruda R., Feldshtein E., Legutko S., Krolczyk G.: Research on emulsion mist generation in conditions of minimum quantity Colin lubrication (MQCL). Tehnicki Vjesnik – Technical Gazette, 22, 2015, 1213-1218.
• 9. Matuszak J., Zaleski K.: Edge states after wire brushing of magnesium alloys. Aircraft Engineering and Aerospace Technology: An International Journal 86/4, 2014, 328-335.
• 10. Nicholson J.W.: Chemia polimerów. WNT, Warszawa 1996.
• 11. Pytko S., Pytko P.: Napięcie powierzchniowe a efekt Rebindera. Tribologia, 3, 2007, 143-153.
• 12. Rakurty C.S., Varela P.I., Balaji A.K.: Effects of targeted Minimum Quantity Fluid (MQF) application on surface integrity. Procedia CIRP, 8, 2013, 462-468.
• 13. Rodriguez A., Lopez de Lacalle L.N., Celaya A., Lamikiz A., Albizuri J.: Surface improvement of shafts by the deep ball burnishing technique. Surface & Coatings Technology, 206, 2012, 2817-2824.
• 14. Shchukin E.D.: The influence of surface – active media on the mechanical properties of materials. Advances in Colloid an Interface Science, 123 (126), 2006, 33-47.
• 15. Zaleski K.: Stanowisko do badań właściwości powierzchniowo aktywnych cieczy obróbkowych. Przegląd Mechaniczny, 9S, 2005, 55-57.
• 16. Zaleski K.: The effect of shot peening on the fatigue life of parts made of titanium alloy Ti-6Al- 4V. Eksploatacja i Niezawodnosc Maintenance and Reliability, 4 (44), 2009, 65-71.
• 17. Zaleski K.: The manner and device for grinding of thin metal sheet, especially with paramagnetic properties. Polish Patent Number: PL 209068-B1.
• 18. Zaleski R., Zaleski K., Gorgol M., Wiertel M.: Positron annihilation study of aluminum, titanium, and iron alloys surface after shot peening. Applied Physics A – Materials Science & Processing, 120, August 2015, 551-559.

Uwagi

Opracowanie ze środków MNiSW w ramach umowy 812/P-DUN/2016 na działalność upowszechniającą naukę.