An influence of the chosen sensors faults to the performance of the vector controlled induction motor drive system

• Autorzy: Klimkowski K. , Dybkowski M.
• Języki publikacji: EN

Abstrakty

EN

In the paper the influence of the chosen sensors faults (rotor speed and stator current sensors) to the properties of induction motor drive system working in the Direct Field Oriented Control structure (DFOC) were tested. Simulations results carried out in Matlab/SimPowerSystem software. Study results contains an analysis of the state variables such as: mechanical and estimated speed, electromagnetic torque, stator's phase currents and rotor flux. Additionally the usage of these signals to develop faults detection algorithms were tested.

Słowa kluczowe

EN

fault tolerant control (FTC); speed sensor; current sensor; faults; induction motor drive; DFOC; MRAS

• Wydawca: Wydawnictwo Politechniki Poznańskiej
• Czasopismo: Computer Applications in Electrical Engineering
• Rocznik: 2014
• Tom: Vol. 12
• Strony: 294--301
• Opis fizyczny: Bibliogr. 7 poz., rys., tab.

Twórcy

autor

Klimkowski K.

• Wrocław University of Technology 50-372 Wrocław, ul. Smoluchowskiego 19

autor

Dybkowski M.

• Wrocław University of Technology 50-372 Wrocław, ul. Smoluchowskiego 19

Bibliografia

• [1] Dybkowski M., "Estimation of speed in a vector controlled induction motor drive - selected problems", Scientific Papers of the Institute of Electrical Machines, Drives and Measurements of Wroclaw Univ. of Technology, No. 67, ser. Monographs, No. 20, (2013), Wroclaw, Poland, 2003 (in Polish).
• [2] Orłowska-Kowalska T., "Sensorless induction motor drives", Wroclaw University of Technology Press, Wroclaw, Poland, 2003 (in Polish).
• [3] Orlowska-Kowalska T., Dybkowski M., "Stator Current-based MRAS Estimator for a Wide Range Speed-Sensorless Induction Motor Drive", IEEE Trans. on Industrial Electronics, vol. 57, no. 4, April 2010, pp. 1296-1308.
• [4] Knapczyk M., Pieńkowski K., "Sensorless control of reversible AC/DC converters", Scientific Papers of the Institute of Electrical Machines, Drives and Measurements of Wroclaw Univ. of Technology, No. 56, ser. Studies and Research, No. 24, (2004), Wroclaw, Poland, 2003 (in Polish).
• [5] Khalaf Salloum Gaeid, Hew Wooi Ping, "Fault Tolerant Control of Induction Motor", Modern Applied Science Vol. 5, No. 4; August 2011, pp 83-94.
• [6] Li Jiang, "Sensor fault detection and isolation using system dynamics identification techniques", PhD thesis, The University of Michigan, 2011.
• [7] K.-S. Lee, J.-S. Ryu, "Instrument fault detection and compensation scheme for direct torque controlled induction motor drivers", IEE Proc.-Control Theory Appl., Vol. 150, No. 4, 2003.